Brook Pocket Auto Catch Carry User Guide
Pair Pocket Auto Catch Carry with your phone
- Turn on your mobile Bluetooth.
- Launch the Map View of Pokémon Go. Tap the Main Menu button.
- Tap Settings at the top right.
- Select Pokémon Go Plus in settings page.
- Select Pokémon Go Plus in available devices.
- Waiting for pairing. When Pokémon Go Plus icon turns on, it means the pairing is completed.
Troubleshooting Pairing Issues:
If Pocket Auto Catch Carry fails to pair and displays “not paired”, go to “Bluetooth” in “Settings” on your device to remove/clear Pokémon Go Plus, then pair it again in the game. Pocket Auto Catch Carry may fail to pair due to updates of the Pokémon Go app or operating system upgrades (Android and iOS).
Having difficulties pairing?
If your Pocket Auto Catch Carry has paired to another device, runs out of power, or has any abnormality that prevents pairing to your current device:
- Go to “Bluetooth” in “Settings” on your phone to remove/clear Pokémon Go Plus.
- Go to the “Settings“ in the game, exit/clear Pokémon Go Plus.
- Tap the yellow circle on Pocket Auto Catch Carry. When a new Pokémon Go Plus appears in the game’s settings, tap it to pair.
Charge Your Pocket Auto Catch Carry
Tap the yellow circle while it is charging; the charging icon will display. If you don’t see the charging icon, make sure Pocket Auto Catch Plus is placed firmly into the charging cable.
Charging Information:
- A full charge takes approximately 90 minutes and lasts for approximately 56 hours with continuous use. When fully charged, the charging graphic will disappear.
- Standby time is approximately 14 days.
- Pocket Auto Catch Carry will automatically time out every hour, requiring reconnection.
- Recommended storage temperature: 10°C~55°C.
- Suggested charging temperature: -40°C~65°C.
Press screen to check if the battery is charging. [Charging] / [Full Charged]
How to change the mode
- Touch the yellow circle to switch between modes.
- Long press the yellow circle for 3 seconds to turn ON/OFF that mode.
Device Modes and Alerts
Catching/Caught Pokémon
- Auto-catch new Pokémon ONLY: ON/OFF
- Auto-catch Pokémon: ON/OFF
- New Pokémon discovered
- Duplicate Pokémon found
- Pokémon caught
- Pokémon not caught
- Waiting
PokéStops
- Auto-collect Pokéstop: ON/OFF
- Pokéstop items collected
- x2 Pokéstop items collected
- x3 Pokéstop items collected
- x4 Pokéstop items collected
- 5+ Pokéstop items collected
- Pokéstop in range
- Pokéstop not in range
- Bag is full
Other Alerts
- 2 Devices pairing: ON/OFF
- Vibration Alerts: ON/OFF
- Startup Screen
- Out of Pokéballs
- Power Saving Mode: ON/OFF
- Updating
- Disconnect
- Battery Capacity Display
- Charging
Compatibility and Important Information
- Device requires a Bluetooth low-energy compatible smartphone with the Pokémon Go app installed.
- Compatible with iPhone 6S or higher devices with iOS Ver. 12 or higher.
- Compatible with Android devices with 4 GB RAM or more, Bluetooth Smart (Bluetooth Ver. 4.0 or higher), and Android Ver. 7.0 or higher.
- This Product is not sponsored, endorsed, or approved by Nintendo, The Pokémon Company, or Niantic.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2ADKM0066
IC ID: 29174-ZPP0066
Product Information
- Product Name: Pocket Auto Catch Carry
- Part Number (P/N): Pocket Auto Catch Carry
- Model Number (M/N): ZPP0066
- This product includes product liability insurance.
- This product is NOT water resistant.
For more details, please visit the official website at www.brookaccessory.com for the latest information, manuals, and other product details.
