Joystick Control
This section details the wiring for joystick control of the RunCam Eagle 3 camera. The diagram illustrates connections for power, video, and menu control.
Connections:
- Power: 5-36V, GND
- Video: Video, GND
- Menu Control: Menu
The system includes the RunCam Eagle 3 camera and a separate OSD Key-press Board (not included). The wiring also shows connections for IRC TRAMP and VIDEO IN, with power supplied via 3.3~5.5V and 5V pins.
Components shown:
- RunCam Eagle 3 Camera
- RunCam TX200 (VTX01A128)
- IRC TRAMP
- 1x OSD Key-press Board (Not Included)
Dimensions & Installation
The RunCam Eagle 3 camera has compact dimensions suitable for various FPV setups.
Dimensions:
- Width: 19mm
- Height: 19mm
- Depth: 20mm
- Internal dimensions/clearances: 8mm, 12mm
Installation typically involves using M2 screws for mounting the camera. The camera features an M12 lens with a 155° Field of View (FOV) at 4:3 aspect ratio.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | RunCam Eagle 3 |
| Image Sensor | 1/2.8" Starlight CMOS Sensor |
| Horizontal Resolution | 1000TVL |
| Lens | 2.1mm (M12) FOV155° (4:3) |
| Screen Format | 4:3/16:9 switchable |
| Mirror/Flip | Available |
| Signal System | NTSC only |
| S/N Ratio | >50dB (AGC OFF) |
| Electronic Shutter Speed | Auto |
| Auto Gain Control (AGC) | Auto |
| Min. Illumination | 0.001Lux@1.2F |
| WDR | Global WDR |
| Day/Night | Color/BW |
| Menu Control | Cable Control |
| Power | DC 5-36V |
| Current | 220mA@5V, 120mA@12V |
| Housing Material | ABS |
| Net Weight | 9g |
| Dimensions | 19mm*19mm*20mm |
