Caddx Infra V2 Quick Start Guide

Product Introduction

The Caddx Infra V2 is a black and white night vision simulation camera with the following key features:

• Reduced Size and Dimensions: Features a new optical design to reduce lens size while maintaining the same light intake as the Infra V1, facilitating easier installation. It also utilizes a higher-grade AI processing chip to reduce the processor module's size, making the device thinner and lighter.
• AI Image Enhancement Camera: Equipped with the new generation Infra V2 AI night vision enhancement algorithm, which improves image clarity by over 30% in low-light environments. It employs AI multi-frame algorithms to enhance dynamic range during night vision, effectively suppressing overexposure/underexposure in backlit scenes and preserving full image details.

Components:

• 1. Infra Camera V2
• 2. Coaxial Cable
• 3. Camera Port
• 4. M2 Hole
• 5. Power Port

Installation Direction

Please install with the side indicated facing down to avoid the image appearing upside down.

[Diagram showing correct installation orientation]

Interface Definition

The camera interface includes:

• CVBS
• GND
• POWER
• DEBUG UART
• POWER/CVBS
• USB
• UART&GPIO

[Diagram illustrating interface connections]

Connection

Power / CVBS Connection:

• 1. POWER: Connect to the FC solder pad (9-24V).
• 2. GND: Connect to the GND (negative terminal).
• 3. CVBS: Connect to the FC CAM interface.

[Diagram showing wiring connections for Power and CVBS]

Specifications

Support

For support, please contact CADDXFPV:

Email: support@caddxfpv.com