sanag Z7 Pro OWS Bluetooth Headset

Product Overview

The sanag Z7 Pro is an OWS Bluetooth Headset. It features a charging case and two earbuds.

Indicator Lights:

• Power On: Open the charging case to automatically power on the headset. The ice-blue light flashes quickly, the second earbud connects, and the light on the main earbud flashes slowly. Alternatively, press and hold the MFB button for 3 seconds to manually turn on the headset.
• Power Off: Place the headset in the charging case to automatically power off. Alternatively, press and hold the MFB touch button for approximately 7 seconds; the ice-blue light flashes 3 times and then turns off.
• Pairing: The headset automatically enters pairing mode upon powering on. The ice-blue light on the main earbud flashes.
• Charging: Place the headset in the charging case. The case charges the headset; the ice-blue light flashes once and turns off after 4 seconds. The ice-blue light stays on while the headset is charging and turns off when fully charged. To charge the charging box, the blue light flashes once and turns off when full.
• Low Battery Alarm: A low battery alert tone is issued every 3 minutes when the headset battery is low.

Button Function Operation

• Answer Call: When a call comes in, press the MFB touch button on either the left or right earbud.
• End Call: During a call, double-click the MFB touch button on either the left or right earbud.
• Reject Call: During an incoming call, press and hold the MFB touch button on either the left or right earbud for 2 seconds.
• Play/Pause: Press the MFB touch button on either the left or right earbud at any time.
• Previous Song: Double-click the left MFB touch button.
• Next Song: Double-click the right MFB touch button.
• Volume Up: Triple-tap the left MFB touch button.
• Volume Down: Triple-tap the right MFB touch button.
• Voice Assistant: Press and hold the MFB touch button on the right earbud for 3 seconds and release to activate the voice assistant. Click to exit.
• Reset Headset: When the phone is not connected to power, reset the headset to factory settings by clicking the MFB buttons on the left and right earbuds 5 times. After automatic shutdown, the headset will light up blue for 2 seconds upon successful reset.
• Game Mode/Music Mode: Tap the MFB buttons on the left and right earbuds 4 times to activate low-latency mode. Tap 4 times again to switch to music mode.

Bluetooth Operation

Successful Bluetooth Connection:

1. The headset enters Bluetooth mode. The mobile phone searches for the Bluetooth pairing name "sanagZ7 Pro". Click to connect.
2. The headset automatically reconnects to the last connected device by default.

Disconnecting Bluetooth:

1. Manually turn off the Bluetooth connection on your mobile phone; the headset will enter Bluetooth pairing mode.
2. The headset will disconnect if it exceeds the range from the mobile phone. It will reconnect normally if it returns within the effective range within 5 minutes. Otherwise, it will automatically shut down after more than 5 minutes.

Specifications

• Name: OWS Bluetooth Headset
• Model: sanag Z7 Pro
• Bluetooth Version: V5.4
• Connection Range: ≥10m
• Charging Voltage: 5V--1A Max
• Headset Battery Capacity: 50mAh
• Charging Case Battery Capacity: 510mAh

Precautions

• Do not use abrasive cleaners to clean this product.
• Do not heat the product or place it near an ignition source, such as a stove.
• Do not expose the product to direct sunlight for extended periods.
• Do not throw the device into fire to avoid explosion.
• Do not attempt to disassemble the device for modifications, as it contains no serviceable components.
• Do not use this product in the rain.
• If you do not plan to use this product for a long time, store it in a dry environment and charge the headset at least once a month to extend its lifespan, avoiding extreme temperatures and humid areas.