Sanag S6S/S6S Max/S6S AI True Wireless Stereo Earbuds

Product Overview

This document provides a user guide for the Sanag S6S, Sanag S6S Max, and Sanag S6S AI True Wireless Stereo earbuds.

Key Components:

• Indicator Light: Provides visual feedback on device status.
• Touch Key (MFB): Multifunction button for controlling playback, calls, and other features.

Key Function Operation

• Power On:
  • Automatic: Earbuds power on when removed from the charging case. The indicator light flashes ice blue quickly, then the auxiliary ear light turns off after connection, and the main ear light flashes slowly.
  • Manual: Press and hold the MFB key for 3 seconds to power on.
• Shutdown:
  • Automatic: Earbuds power off when placed in the charging case and the lid is closed.
  • Manual: Press and hold the MFB touch button for approximately 7 seconds. The ice blue light flashes 3 times and then turns off.
• Pairing: After powering on, the earbuds automatically enter pairing mode (waiting to connect with a mobile phone). The main ear's ice blue light flashes slowly.
• Answering a Call: Click the MFB touch key on either earbud.
• Hanging Up: During a call, double-click the MFB touch key on either earbud.
• Rejecting a Call: When a call comes in, press and hold the MFB touch key on either earbud for 2 seconds.
• Play/Pause: Click the MFB touch key on either earbud.
• Previous Track: Double-click the MFB touch button on the left earbud.
• Next Track: Double-click the MFB touch button on the right earbud.
• Volume Up: Triple-click the MFB touch button on the left earbud.
• Volume Down: Triple-click the MFB touch button on the right earbud.
• Voice Assistant: Press and hold the MFB touch button on either earbud for 3 seconds and release to activate the voice assistant. Click to exit.
• Reset Headset: When the phone is not connected, press the MFB button on either earbud 5 times to reset the headset to factory settings. The ice blue light will stay on for 2 seconds after a successful reset, then the earbuds will turn off automatically.
• Game Mode/Music Mode: Press the MFB button on either earbud 4 times to enter low latency (game) mode. Press 4 times again to switch back to music mode.
• Low Power Alarm: When the earbud battery is low, a low power alarm tone will sound every 3 minutes.
• Charging:
  • Earbuds to Case: Place the earbuds in the charging case. The ice blue light on the earbuds stays on for 4 seconds and then turns off. While charging, the ice blue light on the earbuds remains steady, and turns off when fully charged. The charging case light also turns off.
  • Case Charging: When charging the case, the ice blue light on the case flashes. It stays solid when fully charged.

Bluetooth Operation

Bluetooth Connection Successful:

1. Enter Bluetooth mode on the earbuds. On your mobile phone, search for the Bluetooth pairing name "sanag S6S/sanag S6S Max/sanag S6S AI" and tap to connect.
2. The earbuds will automatically connect to the last paired device by default.

Bluetooth Disconnected:

1. Manually turn off Bluetooth on your mobile phone; the earbuds will enter Bluetooth pairing mode.
2. If the earbuds disconnect due to being out of range, they will attempt to reconnect automatically within 5 minutes of returning to the effective range. If the range is exceeded for more than 5 minutes, the earbuds will shut down automatically.

Specification Parameters

• Name: OWS Bluetooth headset
• Model: sanag S6S/sanag S6S Max / sanag S6S AI
• Bluetooth Version: V5.3
• Connection Range: ≥10m
• Headphone Battery Capacity: 40mAh
• Charging Case Battery Capacity: 400mAh
• Charging Voltage: 5V-1A MAX

Matters Needing Attention (Precautions)

• Do not use abrasive cleaning agents to clean this product.
• Do not heat this product or place it near heat sources, such as cooking stoves.
• Do not expose this product to direct sunlight for extended periods.
• Do not dispose of this product in fire, as it may cause an explosion.
• Do not attempt to disassemble or modify this product, as it contains no user-serviceable components.
• Do not use this product in the rain.
• If the product will not be used for a long time, store it in a dry environment and charge the earbuds at least once a month to prolong their lifespan and avoid extreme temperatures and dust.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Technical Requirements

• Color: Black (C: Black)
• Material: 80g paper, accordion fold (M: 80g book paper, accordion fold)
• Process: Die-cutting (F: Die-cutting)
• Environmental Protection: The product complies with packaging directives, RoHS 2.0, and REACH requirements. It also complies with the latest version of "Lianchuang Hongsheng Hazardous Substance Management Standards" and the "Environmental Agreement" signed by both parties.
• Other:
  • Color consistency with the sample (samples can only be stored for six months). Color difference should be between -3% and 3%.
  • Surface requirements: No oil stains, imprints, damage, or other defects.

Document Control