| 2025/7/18 | V1.12.14 | New Feature- Added support for Shure MXA920 in Zone Mode (Coordinate).
Improvements- Zone rectangle area in Zone Mode can now be freely adjusted to irregular shapes.
- Optimized audio source detection display mechanism: Orange light indicates that the sound is detected but the trigger condition has not been met; Green light indicates that the trigger condition has been met and the camera preset action has been triggered.
- Added support for 1~4 auxiliary camera (BC-200) working with a single microphone.
- Improved camera list UI on the web interface.
- Improved response speed when connecting supported USB cameras.
- Renamed "AI-Director" to "Intelligent Director".
Bug fixes- Resolved connection issues with the Shure microphone series.
- Fixed the delay issue with detected audio points.
| |
| 2025/05/29 | V1.11.23 | New Features- Added support for the VC-TR61 camera.
- Added support for Televic D-Cerno AE system, Shure P300.
- Sennheiser TCC2 and TCCM now support zone mode function.
- Added support for Traditional and simplified Chinese language in the UI.
- Added support for Audio-Technica:ATND1061 zone mode function.
Improvements- Improved the audio algorithm to ensure better performance when connecting multiple microphones.
- Enhanced the trigger mechanism and expanded the time range options for Reference audio.
| |
| 2025/02/13 | v1.10.19 | Improvements- Remove User settings for a cleaner interface.
- More time range options for the Back to Home function.
- Improved the preset calling speed for cameras.
Bug fixes- A warning message will now appear when an incorrect firmware update file is selected.
- Fixed an issue from Reference Audio where it cannot go to home position properly.
New Features- Supports OIP series RTSP streaming.
- Support virtual keyboard.
- Enable Zone Area functionality in Yamaha RM-CG.
Improvements- Support Microphone reconnect mechanism.
- Switch profile without turning off the AI-Box1.
- "Disk Check" moved to setting page.
- Add (Beta)Audio-Technica:ATND1061(Coordinate).
| |
| 2024/12/09 | V1.9.28 | New Feature- Support "AI Director" Function.
- Support secondary camera setting.
- Support Yamaha RM-CG(Coodinate).
- Support reference audio setting to filter the unnecessary sound.
- Support Auxiliary camera setting (BC-200). BC-200 is option accessory and expects to be available on Q1 2025.
- Support Lumens Virtual Mic for demo purpose.
Improvements | |
| 2024/07/15 | V1.8.31 | Improvements- Add 1 by 3 Layout mode.
- Remove "L/R Direction" setting.
- Add Disk Check to monitor the read/load status.
New Feature- Support multiple profile to save and load.
- Support YAMAHA RM-TT microphone.
- Support YAMAHA RM-CR microphone.
- Support AI tracking per "Preset No.".
- Support "Source Position" layout setting on webpage.
- Yamaha RM-CG supports Exclusion Mode.
- Add System Configure function to import or export system settings.
- Add "Error Notification" to enable / disable the error notification for HDMI output.
- Support TCP/UDP/HTTP/HTTPS Protocols.
Improvement- Support using "Camera group" for voice tracking when connecting with Audio-Technica ATND1061LK.
- Improve the Extron connection issue. (when the AI-Box1 executes the "load profile" function, it causes Extron to be unable to connect to the AI-Box1 for approximately 2 minutes).
- Reconnect cameras if AI-Box detect the lost connection.
- AI-Box1 & camera connection improvement.
- Optimization of Boot Process.
- Improve the reconnect process with Nureva microphone.
Bug Fixed- Bug fixed that AI-Box1 reboots randomly.
| |
| 2024/03/04 | V1.7.18 | - Bug fixed that AI-Box1 with RM-CG & RM-W back to home feature is not working.
- Bug fixed that USB drop issue with Lenovo MTR.
- Bug fixed that USB may lost connection after 17 hours use.
New Feature- Support Audio-Technica ATND1061LK.
- Support YAHAMA RM-CR(Beta).
- Support YAHAMA RM-TT(Beta).
- Support Nureva HDL410(Coordinate) Zone preset.
- Support changing source layout during Video output.
- Support viewing the setting items during Video output.
- Add OTA Auto Check switch.
Improvement- Webpage UI improvement.
- HDMI GUI improvement.
Bug Fixed- Fixed that VC-TA50 Pan Tilt control slow issue.
- Fixed that AI-Box1 may restart when using Nureva remote to mute HDL system.
| |
| 2024/01/22 | V1.6.12 | Improvement- Improve the stability when using webpage Offline FW update.
Bugs Fixed- Fixed that CamConnect Pro may not be detected by PC.
- Fixed that no video output after enable UVC output.
- Fixed that enable UVC output for a while, unit may crash and no image from HDMI/UVC.
| |
| 2023/11/07 | V1.6.8 | New Feature- Support Shure MXA710.
- Support Nureva Dual HDL300.
- Support Yamaha RM-W series (Wireless Desktop Microphone).
- Support cameras can be adjusted the position when selecting PBP/ cross / crop layout.
- Support webpage offline firmware update.
Improvement- Remove mouse symbol if no mouse is connected.
- Add "System Startup Waiting Time" function to adjust auto search timing to search cameras after AI-Box1 power on.
Bugs Fixed- Bug fixed that Nureva HDL410 lost connection.
| |
| 2023/10/06 | V1.5.6 | New Feature- Support Audio-Technica ATND1061DAN.
- Support Shure Microflex® Complete Wireless (MXCW) system.
- Add more preset for one array microphone.
- HDMI & UVC both output from AI-Box1 (GUI only).
Improvement- Fan noise issue improvement.
- PTZ control & AI Setting UI improvement (GUI only).
- Add Delete icon to remove disconnected cameras from camera list.
- When cameras are disconnected, previous camera setting on preset will not be removed.
- Trigger Time add 0.3 Sec / 0.1 Sec.
Bugs Fixed | |
| 2023/9/12 | V1.4.5 | Description- When camera is disconnected, video output will show "No Signal".
- Shure MXA310 lost connection issue.
- Device name will be recognized as "CamConnect Processor".
New Feature- Added support for the new microphone - Sennheiser TCCM.
- Netmask now supports custom settings.
- Added MAC ID information to the webpage and GUI.
Bugs Fixed- Fixed an issue where AI-Box1 firmware couldn't be updated when a static IP was set.
- Fixed the P/T control issue with VC-A61P where the camera would abnormally return to the home position.
- Fixed the problem where UVC output would display no image when the AI-Box1 USB cable was unplugged and then re-plugged.
- Fixed the issue where UVC output might stop after playing for an extended period of time.
| |
| 2023/08/04 | V1.3.5 | New Feature and Improvement- Support ONVIF to search AI-Box1.
- Support change the camera name.
- Support import and export setting config file.
- Improve the Camera status to be on and off.
- Improve voice mapping setup by giving more information on estimation angle.
Bugs Fixed- Fixed VC-BC series only trigger preset once.
- Fixed Nureva display wrong port after switch device.
| |
| 2023/07/07 | V1.2.7 | Description- Fixed issue on fail to login webpage on specific IP.
- Fixed [Back to home] perform wrong home position.
- Fixed re-plug USB display black image when enable UVC output.
- Fixed [Auto-connection] does not find the camera after reboot.
- Fixed RJ45 trigger auto reboot when outputting USB.
- Fixed [L/R Direction] does not apply to Pan Motion.
First version. | |
