Humminbird HELIX Series Control Head Installation Guide

Introduction

This guide provides comprehensive instructions for the proper installation of your Humminbird HELIX Series Control Head. It covers essential steps from preparation and planning the mounting location to connecting power and testing the system. Ensure all instructions are followed carefully for optimal performance and safety.

Key Installation Steps

• Preparation: Gather necessary tools and supplies, and read all instructions before beginning.
• Mounting Location: Select a stable, protected surface with adequate space and visibility, ensuring proper cable routing access.
• Gimbal Bracket Installation: Securely mount the gimbal bracket using the provided hardware.
• Power Connection: Connect the control head to a 12 VDC power supply, ensuring correct wiring and fuse protection.
• Cable Routing: Route all necessary cables (power, transducer, accessories, Ethernet) neatly and securely, avoiding potential interference.
• System Testing: After installation, test the system to confirm all accessories are connected and functioning correctly.

Resources

For additional information, troubleshooting, and video resources, visit the official Humminbird website at humminbird.johnsonoutdoors.com and their YouTube channel at youtube.com/humminbirdtv.