Manuals+

INOGENI TOGGLE ROOMS Firmware Release Notes

Here is the history of the Toggle Rooms releases:

ReleaseDescription
1.28 – June 19, 2025New Features:
  • Added TCP to RS232 tunneling feature. The device will act as a bridge to send/receive data to/from RS232 device. See "user manual" under “Serial communication protocol” section for more details.
Improvements:
  • Adding import of SSL certificate for HTTPS through API.
  • Adding full support of GPI level mode.
Bug Fixes:
  • Corrected issue where device would not boot correctly when user applied an unsupported host name.
  • Corrected issue with front button in manual and custom mode that prevented the user from using it.
  • Corrected a rare issue where the product might not boot correctly during power up sequence due to a bad power connection.
  • Corrected issue while using BYOM mode, the device would switch current USB/HDMI host upon disconnection of other USB/HDMI host connections.
1.27 – May 22, 2025Improvements:
  • Corrected bootup sequence which may cause initialization issue.
Bug Fixes:
  • IMPORTANT! If your unit is running Release 1.26, you will need to upgrade your device through a USB connection using the Maestro application since the upgrade from the local web interface is not supported. This limitation is fixed when upgrading to this current firmware.
  • Fixed a rare issue where the product might become unresponsive.
1.26 – March 21, 2025Bug Fixes:
  • Fixed a rare issue where the product might become unresponsive.
New Features:
  • Added local web interface for user configuration, update and monitoring.
  • Added token support for secured control communication.
  • Since the device supports the mDNS networking protocol, you can access the web interface of the device using a link-local networking URL. This URL looks like the following example and includes the last 3 bytes of the MAC address and will end with the .local suffix:
    38:76:05:00:80:00
    toggle-rooms-008000.local
    See "user manual" under "Web interface access" section for more details.
Improvements:
  • Major optimization of HTTPS communication.
  • Fixed USB-C charging using ASUS Chromebook.
Bug Fixes:
  • Corrected communication issue with our Q-SYS control plugin.
1.25 – January 9, 2025New Features:
  • Added Q-SYS plugin support. See INOGENI website for Q-SYS control plugin.
  • Added additional information with the STATUS command, like HDCP and host priorities.
  • Added support for GPI configuration 3&4 based on current operation mode and priorities.
Improvements:
  • Major optimization of the video switching delay over USB-C and HDMI.
  • Added general stability to RS-232 and Ethernet interfaces.
1.24 – August 30, 2024Bug Fixes:
  • Fixed minor issues with Rest API commands and responses.
  • Fixed an issue where Telnet Server would send random characters.
  • Fixed an issue where the EDIDHDMIOUT command would send only half of the EDID.
  • Other minor bug fixes and improvements.
New Features:
  • Added "USB follows HDMI" and "HDMI follows USB" switching modes.
  • Added feature to copy EDID from display and share outputs.
  • Added ability to scan between the systems using front button and INO-Host button. Upon button press, here will be the behavior of the LED:
    • 1x led pulse indicates laptop USB-C selection.
    • 2x led pulses indicate laptop USB-B/HDMI selection.
  • Added priorities on specific USB-C, USB-B and HDMI ports.
Improvements:
  • Using factory defaults, the device will report a preconfigured EDID (1080p60) to the video sources to optimize switching time.
  • Small stability improvement when entering DP with some laptops.
  • Reporting a simple web interface to indicate the user to download our Maestro desktop application to configure and upgrade the unit. See “Known issues" section.
  • Automatic CEC control is now improved with systems that are always reporting the +5V supply from the HDMI connection when they are entering sleep mode.
  • Adding API command (HOSTBUTTON) to trigger the same functionality as the front button or INO-Host button.
Bug Fixes:
  • Corrected issue where the INO-Host Button would change the operation mode configuration.
1.20 – April 5, 2024New Features:
  • Improved USB-C VBUS overcurrent management.
Improvements:
  • Stability improvements regarding active cables.
  • Small stability improvement when entering DP with some laptops.
Bug Fixes:
  • Fixing an issue where USB-C stack would restart at attachment.
  • Fixing an issue with devices like tablets and cellphone where they would be charging but not entering DP mode.
  • Some additional fixes in the network config.
1.19 – March 14, 2024Official release.

KNOWN ISSUES

Here are the known issues for this specific product. These will be corrected throughout the firmware releases.

PDF preview unavailable. Download the PDF instead.

INOGENI-TOGGLE-ROOMS ReleaseNotes 2025-06-19 Microsoft Word for Microsoft 365

Related Documents

Preview INOGENI Maestro Release Notes
Release notes for INOGENI Maestro, detailing new features, improvements, and bug fixes for versions 2.1 and 2.0.
Preview INOGENI TOGGLE ROOMS User Guide
This user guide provides comprehensive information on the INOGENI TOGGLE ROOMS device, covering its features, operation modes, connectivity, specifications, and troubleshooting.
Preview INOGENI TOGGLE ROOMS: 3 Host Switcher for USB/HDMI Devices
Overview of the INOGENI TOGGLE ROOMS, a 4K BYOD/BYOM 2PC switcher for USB 3.0/HDMI devices, enabling seamless switching and 100W USB-C charging for unified communication systems.
Preview INOGENI U-BRIDGE 3 USB 3.2 Gen 1 Extender User Guide
Comprehensive user guide for the INOGENI U-BRIDGE 3, a USB 3.2 Gen 1 extender over CAT6A. Learn about setup, interfaces, specifications, troubleshooting, and certifications.
Preview INOGENI製品ラインナップ：Pro AV・ビデオ会議ソリューション
INOGENIのPro AV製品ラインナップをご紹介。BYOD/BYOM対応スイッチャー、USB/HDMIコンバーター、USB延長器、ビデオミキサーなど、高品質なビデオ会議・コラボレーションソリューションを提供します。
Preview INOGENI INO-BUTTON KIT Installation Guide
Comprehensive installation guide for the INOGENI INO-BUTTON KIT, a backlit switch button designed for tables in video conferencing setups. Learn how to connect and use it with TOGGLE ROOMS and TOGGLE ROOMS XT systems for seamless BYOM experiences.
Preview INOGENI TOGGLE ROOMS XT User Guide
Comprehensive user guide for the INOGENI TOGGLE ROOMS XT, detailing its features, specifications, operation modes, connectivity, and troubleshooting for videoconferencing setups.
Preview INOGENI U-BRIDGE 3 WP USB 3.2 Gen 1 Extender User Guide
User guide for the INOGENI U-BRIDGE 3 WP, a USB 3.2 Gen 1 extender over CAT6A. Details specifications, interfaces, connectivity, troubleshooting, and certifications for professional AV and IT applications.