GE Cync reveal® Full Color Undercabinet Fixture Installation Guide
Model: PC93131249
Brand: GE Lighting / GE Cync
Works With Savant Installers
This fixture is designed to work seamlessly with Savant home automation systems, offering enhanced control and integration for your smart home.
Additional Information and Warnings
Read all instructions before installation. Failure to follow instructions may result in damage to the product or personal injury.
Ensure power is turned OFF at the circuit breaker or fuse box before installation or servicing.
⚠️ Warning: Once the knock-out is removed, the luminaire can only be hardwired and can no longer be plugged in.
Do not install in damp or wet locations. Do not install near gas or electric heating apparatus. For indoor use only. Do not overload circuits. Ensure proper grounding. If you are unsure about any part of the installation, consult a qualified electrician.
Use your new Undercabinet Fixture? Share your experience
We value your feedback! Share your experience with your new GE Cync reveal Undercabinet Fixture.
[4 out of 5 stars]
Getting Started
Before you begin, gather the necessary tools and components:
- ? Screwdriver
- ✂️ Wire stripper
- ? Pliers
- [Light fixture]
Specifications
| Type of Fixture | Model | Lumens | Wattage | Voltage | Dimensions |
|---|---|---|---|---|---|
| Undercabinet Fixture | Cync reveal | 1000 | 14W | 120V~ 60Hz | 24" L x 3" W x 1" H |
Dimming Capability
This fixture is compatible with most standard LED dimmers. For optimal performance and to ensure full color-changing capabilities, it is recommended to use GE Cync dimmers or other compatible smart dimmers. Refer to the GE Cync app for a list of compatible dimmers.
Let's Do It
Follow these steps for a successful installation:
- ? Screwdriver
- ✂️ Wire stripper
- [Wire connector]
- [Light fixture]
- [Power cord]
- [30-inch cable]
Installation
Step 1: Turn Off The Power!
Ensure power to the circuit is turned off at the breaker or fuse box before beginning installation.
Step 2: Remove knock-out
Locate the knock-out opening on the fixture. Use a screwdriver or pliers to carefully remove the metal knock-out piece.
Step 3: Mount strain relief to the connection cover
Attach the strain relief clamp to the fixture's connection cover. This secures the wiring.
Step 4: Install fixture
Position the fixture against the mounting surface. Secure it using appropriate screws (not included).
Step 5: Position fixture
Align the fixture with the desired mounting location. Ensure it is level and securely attached.
Step 6: Connect fixture to power source
Connect the fixture's wires to the corresponding house wires (e.g., black to black, white to white, ground to ground) using wire connectors. Ensure all connections are secure.
Joining multiple fixtures
To connect multiple fixtures in series, use the provided connectors. Ensure the power is off before connecting. You can join up to six (6) GE Cync reveal fixtures together.
Congratulations!
Congratulations! Your GE Cync reveal Undercabinet Fixture is now installed and ready to use. Enjoy your new lighting!
