GE Lighting
A SAVANT COMPANY
Quick Start Guide
Document Review Checklist:
- Proof Reading - Spelling
- Proof against TDS request
- Website
- Graphics Printability
| REVISION (DATE) PA: | 1 (12-01-23) JCS |
| BAR CODE SPEC: | 100% No BWR, 80% No BWR, N/A |
| INSERT (IF SHARED): | None |
| ANSI SAFETY NUMBER: | N/A ANSI: |
| PRINT METHOD: | Offset/Litho, Flexo (direct) |
| GE DIE: | NOT CONTROLLED |
| PK (VERSION): | PK-00100488-9 |
93128968 QSG
Dimensions: 3.687 inches
Note: This artwork is supplied at 100% scale. Do not resize, reshape, or alter.
Dimensions: 3.687 inches
Installation and Operation
- Insert bulb into fixture.
- Turn on the lamp.
- Use the remote provided to change colors, switch from daylight (5000K) to soft white (2700K), or to dim the light.
- Bulbs can be controlled individually by using the remote within close range of a specific bulb. One remote can control multiple LED+ Color bulbs.
Visit gelighting.com/led-plus for more information.
GE is a trademark of General Electric Company. Used under trademark license.
Remote Control Included
Pull the plastic card out from the battery compartment. See below for the functions of each button:
Remote Functions:
- Power Button (⏻): Turns the light on/off.
- Timer Button (⏱️): Sets a timer for the light.
- Strobe Flash Button: Activates strobe or flash mode.
- Minus Button (-): Decreases brightness or adjusts settings.
- Settings Button (⚙️): Cycles through color modes or settings.
- Plus Button (+): Increases brightness or adjusts settings.
- Smooth Fade Button: Activates smooth fade mode between colors.
- Color Selection Buttons: Select specific colors (e.g., Red, Orange, Yellow, Pink, Green, Cyan, Blue, Purple).
