ASW H-T3 Series
Three phase hybrid inverters 8 to 12 kW
Key Features
Easy-to-install [wrench]
- Quick and easy-to-install with standard tools
- Compact wall mount design
- Simple battery and smart meter interfaces for quick and secure installation
Safe & reliable [shield]
- Up to 150 % PV array oversizing for higher yields
- Available with or without asymmetrical power output 1
- UPS level switching time < 10 ms
- IP66 rated design for indoor and outdoor use
- Arc fault circuit interrupter (AFCI) 2
- ShadeSol shadow management
User-friendly [smartphone]
- 3 independent MPPTs for flexible and higher kWp PV array design
- Smart setup, commissioning and monitoring via Solplanet App
- Intelligent operation modes and smart battery management for DOD / Time of Use / Power setting
- Max. 16 A input current, ideal for bifacial and large PV modules
- Supporting parallel for on-grid and off-grid operation
Models
- ASW08kH-T3
- ASW10kH-T3
- ASW12kH-T3
Technical Datasheet
| Parameter | ASW08kH-T3 | ASW10kH-T3 | ASW12kH-T3 |
|---|---|---|---|
| PV input | |||
| Max. PV array power | 12000 Wp | 15000 Wp | 18000 Wp |
| Max. input voltage | 1100 V 5 | ||
| MPP voltage range / rated input voltage | 200 V to 950 V / 630 V 3 | ||
| Min. input voltage / start voltage | 60 V / 180 V | ||
| No. of independent MPPT trackers / strings per MPPT input | 3 / 1 | ||
| Max. input current / Max. power per MPP tracker | 16 A | 10000 W | 16 A |
| Max. short-circuit current per MPP tracker | 16 A | 10000 W | 16 A |
| Battery input | |||
| Battery voltage range | 120 V to 600 V 5 | ||
| Max. charging / discharging power | 8000 W | 10000 W | 12000 W |
| Max. charging current / Max. discharging current | 30 A 5 | ||
| Battery type | LiFePO4 | ||
| AC input | |||
| Rated grid voltage | 3/N/PE, 220/380 V; 230/400 V; 240/415 V | ||
| Rated grid frequency | 50 Hz / 60 Hz | ||
| Max. input power from grid | 16000 W | 20000 W | 24000 W |
| Max. input current from grid | 23.2 A | 29.0 A | 34.8 A |
| AC voltage range / Nominal AC voltage | 270V to 480V / 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V | ||
| Rated AC grid frequency | 50 Hz / 60 Hz | ||
| AC grid frequency range | 45 ~ 55 Hz / 55 ~ 65 Hz | ||
| AC output | |||
| Rated apparent power | 8000 VA | 10000 VA | 12000 VA |
| Max. apparent power | 8000 VA | 10000 VA | 12000 VA |
| Rated grid output current (@400 V) | 11.6 A | 14.5 A | 17.4 A |
| Max. grid output current(@400 V) | 12.8 A | 16.0 A | 19.2 A |
| Power factor at rated power / adjustable displacement | 1 / 0.8 leading to 0.8 lagging | ||
| Harmonics THDi (@ Nominal power) | < 3 % (of nominal power) | ||
| EPS output | |||
| Nominal output voltage | 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V | ||
| Nominal output frequency | 50 Hz / 60 Hz | ||
| Rated apparent power | 8000 VA | 10000 VA | 12000 VA |
| Rated current (@400 V) | 11.6 A | 14.5 A | 17.4 A |
| Max. current (@400 V, continuous on-grid / off-grid) | 23.2 A / 11.6 A | 29.0 A / 14.5 A | 34.8 A / 17.4 A |
| Max. power on each phase (@400 V, continuous on-grid / off-grid) | 5333 W / 2667 W | 6667 W / 3333 W | 8000 W / 4000 W |
| Peak output apparent power (@400 V, continuous on-grid / off-grid up to 10s) | 16000 VA / 16000 VA | 20000 VA / 20000 VA | 24000 VA / 24000 VA |
| Max. switch time | < 10 ms | ||
| Output THDv (@ Linear load) | 2 % | ||
| Effi- ciency | |||
| MPPT efficiency | 99.9 % | ||
| Euro efficiency / Max. efficiency | 97.2 % / 98.0 % | 97.9 % / 98.4 % | |
| Safety protection | |||
| DC surge protection (Type II, according to EN/IEC 61643-11) | • | • | • |
| Insulation resistance detection | • | • | • |
| PV string input reverse polarity protection | • | • | • |
| Battery input reverse polarity protection | • | • | • |
| Ground fault monitoring | • | • | • |
| Residual current monitoring unit | • | • | • |
| AC short circuit protection | • | • | • |
| Anti-islanding protection | • | • | • |
| Arc fault circuit interrupter (AFCI) | • | • | • |
| General data | |||
| Dimensions (W / H / D) | 545 / 465 / 205 mm | ||
| Weight | 26 kg | ||
| Operating temperature range | -25 °C ... +60 °C | ||
| Cooling concept | Natural convection | ||
| Noise emission | < 35 dB | ||
| Degree of protection (as per IEC 60529) | IP66 | ||
| Max. relative humidity | 100 % | ||
| Max. operating altitude | 4000 m | ||
| User interface | LED & App | ||
| BMS interface | CAN | ||
| Smart meter interface | RS485 | ||
| Communication interfaces | Dongle: WiFi (2.4 GHz) / LAN (100 Mbps) Inverter: RS485 (ModBus RTU), LAN (100 Mbps, Modbus TCP only) 4 | ||
| Features | |||
| Digital output (dry contact) / No. of outputs | / 2 | ||
| Digital input (dry contact) / No. of inputs | / 4 | ||
| Integrated power control / export power control | / | ||
Notes:
1 Asymmetrical power output functionality released in August 2024, please confirm version with Solplanet's sales staff before purchase.
2 AFCI functionality released in April 2025, please confirm version with Solplanet's sales staff before purchase.
3 The latest optimised platform design supports MPP voltage range at 150V-950V, pending subsequent certificate updates.
4 Modbus TCP functionality released in April 2025, please confirm version with Solplanet's sales staff before purchase.
5 When connecting to Solplanet's high voltage batteries (with only 5 kWh, i.e. two modules), limitations as below apply:
- The maximum voltage of PV shall not exceed 750V
- The battery voltage range is reduced to 102.4 V for the particular operation
- The maximum charging and discharging current depends on the operating point and is within the range greater than 25A, less than 30A
