Overview
The IC-MIB2 enhances Audi vehicles equipped with the MIB2 system by adding up to three additional composite video inputs to the factory screen. Users can activate a forced video input by holding the 'hang up' button on the steering wheel.
Kit Components
- IC-MIB2 Interface Unit
- LCD IN Cable
- Main T-Harness
Interface Ports
The IC-MIB2 interface features the following ports:
- LVDS OUT
- LVDS IN
- Main Power INPUT
- Dip Switches
- NOT USED
DIP Switch Settings
| DIP | ON | OFF ↑ | MODEL / SCREEN | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|---|---|
| 1 | A4, Q5 (7" screen) after Sept 2018 | OFF | OFF | ON | OFF | ||
| 2 | A4, Q5 (7" screen) before Sept 2018 | OFF | OFF | OFF | OFF | ||
| 3 | SEE SIDE CHART | A4, A5, Q7 (8.3" w/ black frame) | OFF | OFF | OFF | OFF | |
| 4 | A4, A5, Q7 (8.3" w/ chrome frame) | OFF | OFF | ON | OFF | ||
| 5 | Video IN Enable | Video IN Disable | A3 (800x480) | ON | OFF | OFF | OFF |
| 6 | LEAVE OFF | LEAVE OFF | A3 (400x240) | OFF | ON | ON | ON |
| 7 | Front cam timer ON | Front cam timer OFF | A3, Q2 (7" screen) | OFF | ON | OFF | OFF |
| 8 | OE RVC | AFTER RVC | Q2 (8.3" screen) | ON | ON | OFF | ON |
| Porsche PCM4.0 | OFF | OFF | ON | ON | |||
| 2018 A5 | OFF | ON | OFF | ON | |||
| VW MIB2 (5.8" screen) | ON | OFF | ON | ON | |||
| VW MIB2 (8" screen) | ON | ON | ON | OFF | |||
| VW MIB2 (6.5" screen) | ON | ON | ON | ON |
Note: DIP switch settings may vary based on specific vehicle models and screen sizes. Refer to the diagram for wiring details.
Diagram and Wiring
The system diagram illustrates the connections for the IC-MIB2 Interface, OE MIB2 Screen, and OE MIB2 Radio. Key connections include:
- OE LVDS Screen Cable connecting the OE MIB2 Screen to the IC-MIB2 Interface.
- Provided LCD IN Cable connecting the IC-MIB2 Interface to the OE MIB2 Radio.
- Wiring harness connections for power and video signals:
- 12v (+) OUT when forced
- REV (+) TRIG IN
- REV (+) OUT
- REVERSE CAM
- TIMED FRONT CAM
- FORCED VIDEO INPUT (DVR VID)
A Radio T-Harness facilitates these connections. The OE MIB Radio Main Power is also indicated.
Front Camera Connection: For front camera integration, particularly for timer-based activation (after reverse) or forced 'ON' functionality, a Y-Adapter (not provided) is required. This adapter connects to the REAR VID and FRONT VID inputs, with the DVR VID input also available.
[ZZ2 Logo]
Email: support@zz-2.com
Phone: 929-220-1212
Toll free: 877-241-2526
Address: 1080 Holland Drive, Boca Raton, FL 33487
mailto:support@zz-2.com
