ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

CompactRIO and LabVIEW Getting Started Guide

This guide provides an introduction to developing applications for National Instruments CompactRIO systems using the LabVIEW graphical programming environment.

It covers essential steps for setting up hardware and software, configuring your CompactRIO system, and creating control applications.

Key Topics Covered:

Understanding CompactRIO and LabVIEW integration.
Setting up necessary hardware and software components.
Developing applications using both the Scan Interface and FPGA Interface modes.
Configuring I/O modules for tasks like pulse width modulation and period measurement.
Creating and deploying VIs for embedded control.

This resource is designed for users looking to leverage the power of CompactRIO and LabVIEW for industrial and embedded applications.

For further assistance and resources, visit the National Instruments website:

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 24 Pages, 839.01KB

Related Documents

	Demko Certificate for National Instruments Measurement and Control Systems This document is a Demko Certificate for National Instruments Corp, detailing compliance for various measurement and control systems. It includes certificate number, issue date, holder information, manufacturer details, production sites, product models, and testing standards.
	NI High-Speed Digitizers Getting Started Guide A guide to installing, configuring, and testing NI high-speed digitizers and accessories, including programming with NI-SCOPE software. Covers models NI 5105, 5114, 5122, 5124, 5132, 5133, 5142, 5152, 5153, 5154, 5160, 5162, 5185, 5186, 5620, 5621, 5622, 5900, and 5922.
	NI 62xx/63xx Pinout Labels for SCB-68A Provides pinout labels for National Instruments (NI) 62xx and 63xx series multifunction I/O modules and devices when used with the SCB-68A shielded connector block, detailing connections for various connectors and configurations.
	CompactRIO cRIO-9063, cRIO-9064, and cRIO-9065 Operating Instructions and Specifications This document provides operating instructions and specifications for the National Instruments CompactRIO cRIO-9063, cRIO-9064, and cRIO-9065 embedded real-time controllers with reconfigurable FPGA for C Series Modules. It covers getting started, hardware installation, device I/O configuration, powering, and connecting the device.
	National Instruments cRIO-9054 CompactRIO Controller Technical Specifications Comprehensive technical specifications for the National Instruments cRIO-9054 CompactRIO Controller, detailing its processor, software, networking, timing, USB, memory, FPGA, power, physical, environmental, and compliance characteristics. Includes detailed information on performance and operational parameters.
	National Instruments C Series Analog Input Modules: NI 9201, NI 921x, NI 9221, NI 923x Overview of National Instruments C Series analog input modules, including NI 9201, NI 921x, NI 9221, and NI 923x. Details features, specifications, system compatibility, and accessories for high-accuracy measurements in CompactRIO and CompactDAQ systems.
	NI cRIO-9038 Embedded CompactRIO Controller Getting Started Guide A guide to help users begin using the National Instruments cRIO-9038 Embedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGA, covering safety guidelines, hardware setup, software installation, and troubleshooting.
	NI Calibration Executive: Automated Calibration Software for Measurement Hardware National Instruments Calibration Executive software automates the verification and adjustment of NI measurement hardware. This document outlines supported products, system requirements, and additional resources for using the software.