DEMKO CERTIFICATE

Certificate Details

Certificate No.	D-03383
Page	1/3
Date of Issue	2014-06-12
Certificate Holder	NATIONAL INSTRUMENTS CORP 11500 N MOPAC EXPY AUSTIN, TX 78759-3504 USA
Manufacturer	NATIONAL INSTRUMENTS CORP 11500 N MOPAC EXPY AUSTIN, TX 78759-3504 USA
Production site	BIZLINK CHINA INC 1ST INDUSTRIAL ZONE FENGHUANG VLG FUYONG TOWN BAOAN DISTRICT SHENZHEN, 518103 GUANGDONG CHINA
Certified Product Model	Measurement and Control System
Trademark
Rated Voltage / Frequency	See test report for details
Rated Current / Power	See test report for details
Insulation Class	I
Degree of protection (IP)	EN 61010-1:2010, EN 61010-2-030:2010
Tested acc. to	E183728-A12-IT-5 issued on 2014-06-10
Test Report No.	See Page 2
Additional	See Page 2
Expire date	2024-06-11

Certification Information

Certification Manager: Jan-Erik Storgaard

This is to certify that representative sample(s) of the Product described herein ("Certified Product") have been investigated and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the D or for cables <DEMKO> for the Certified Product manufactured at the production site(s) identified above, in accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and Certification Services Service Terms. Only those Products bearing the D Mark should be considered as being covered by UL's D Mark Service. This Certificate shall remain valid through the expiration date, unless terminated earlier in accordance with the Service Agreement including without limitation if the Standard identified on this Certificate is amended or withdrawn prior the expiration date.

Certification Body: UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com, www.ul-europe.com

Appendix DEMKO CERTIFICATE

Page 2/3

Model Details:

cRIO-9201, cRIO-9201 with DSUB, cRIO-9203, cRIO-9205, cRIO-9205 with DSUB, cRIO-9207 with DSUB, cRIO-9208 with DSUB, cRIO-9211, NI 9212, TB-9212, cRIO-9213, cRIO-9214, NI TB-9214, cRIO-9215, cRIO-9215 with BNC, cRIO-9217, NI 9218 with DSUB, cRIO-9219, NI 9220, NI 9220 with DSUB, cRIO-9221, cRIO-9221 with DSUB, cRIO-9222, NI 9222 with BNC, cRIO-9223, NI 9223 with BNC, cRIO-9225, cRIO-9227, cRIO-9229, cRIO-9229 with BNC, NI 9232, cRIO-9233, cRIO-9234, cRIO-9235, cRIO-9236, cRIO-9237, cRIO-9237 with DSUB, NI-9238, cRIO-9239, cRIO-9239 with BNC, NI-9242, NI-9244, cRIO-9263, cRIO-9264, cRIO-9264 with DSUB, cRIO-9265, cRIO-9269, cRIO-9375, cRIO-9375 with DSUB, NI 9381 with IDC, NI 9381 with DSUB, cRIO-9401, cRIO-9402, cRIO-9403 with DSUB, cRIO-9411, cRIO-9421, cRIO-9421 with DSUB, cRIO-9422, cRIO-9423, cRIO-9425, cRIO-9426 with DSUB, cRIO-9435, NI 9437, cRIO-9467, NI 9469, cRIO-9472, cRIO-9472 with DSUB, cRIO-9474, cRIO-9475 with DSUB, cRIO-9476, cRIO-9477, cRIO-9478 with DSUB, NI 9481, NI 9482, cRIO-9485, cRIO-9501, NI 9502, NI 9503, cRIO-9505, cRIO-9512, cRIO-9514, cRIO-9516, NI 9795, cRIO-9802, cRIO-9852, cRIO-9853, NI 9860/2, NI 9861, cRIO-9862, NI 9866, cRIO-9870, cRIO-9871, cRIO-9881, cRIO-9882, NI-XNET CAN HS/FD, NI-XNET CAN HS, NI-XNET LIN, NI-XNET CAN LS, NI-XNET CAN SW, NI-XNET CAN FD+PN.

Products may also be referred to as NI XXXX, cRIO-XXXX, cDAQ-XXXX or XXXX, where XXXX is the four digit number.

Production Sites:

• NI HUNGARY KFT
  HATAR UT 1/A
  DEBRECEN, 4031 Hungary
• NI MALAYSIA SDN BHD
  NO 8
  LEBUH BATU MAUNG 1
  BAYAN LEPAS, 11960 PENANG Malaysia

Additional Information:

This Certificate replaces earlier issued D Certificate No. D-02997 on 2013-11-27 due to updating model, rating and factory.

Testing done under the Supervised Manufacturer's Testing (SMT) procedure.

Appendix DEMKO CERTIFICATE

Page 3/3

[D-symbol]

Certification Body: UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, info.dk@ul.com, www.ul-europe.com