TECKNET M006 Cordless Mouse User Manual

Product Overview

This manual provides instructions for the TECKNET M006 Cordless Mouse, a comfortable and reliable peripheral designed for everyday use. It features an ergonomic design for extended comfort and advanced functionality.

Product Layout

The mouse features the following components:

• DPI Switch Button ⚙️: Allows adjustment of mouse sensitivity.
• Low Battery Indicator ?: Alerts the user when batteries need replacement.
• Scroll Wheel: For smooth scrolling through documents and web pages.
• Right Click Button
• Left Click Button
• Backward Button: Navigates to the previous page or item.
• Forward Button: Navigates to the next page or item.

Technical Specifications

Package Contents

• 1 x Cordless Mouse
• 1 x USB Nano Receiver ?
• 1 x User Manual
• Note: Batteries are NOT included.

System Requirements

Hardware

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0 port

Operating System

• Windows XP, Vista, Win7, Win8, Win8.1, Win10
• Note: The scroll wheel functionality is optimized for these operating systems.

Getting Started & Features

Battery Installation

The optical mouse requires two AA batteries (not included).

1. Open the battery cover.
2. Insert the batteries into the compartment, ensuring correct polarity (+/-) alignment with the markings.
3. Close the battery cover.
4. Switch on the mouse using the power switch located underneath. The red LED indicator at the top will flash.

Note: Ensure correct battery polarity for proper function.

Receiver Connection

Take out the USB Nano receiver and plug it into a free USB port on your computer. Your system's Plug & Play function will automatically detect and install the device.

Note: The receiver can be stored in the battery compartment when not in use.

30-Month Battery Life

The mouse is designed for low power consumption, offering up to 30 months of battery life with typical usage. Actual battery life may vary based on user and computing conditions.

Intelligent Power Saving (IPS)

The mouse features an Intelligent Power Saving (IPS) function to conserve battery:

• The mouse automatically powers off when the USB Nano receiver is disconnected or the PC is switched off.
• After 10 seconds of inactivity, the mouse enters IPS Level 1. Click any button to wake it.
• After 8 minutes of inactivity, the mouse enters IPS Level 2 (sleep mode). Click any button to wake it.

DPI Switching

Adjust the mouse sensitivity with six DPI levels:

• Available DPI: 800/1200/1600/2400/3200/4800DPI.
• Default DPI: 1200DPI.
• Press the DPI button to cycle through DPI levels. The LED indicator will flash to confirm the change (e.g., three times for the first increase).

Low Battery Indicator ?

When the battery power is low, the indicator light located under the scroll wheel will flash. Please replace the batteries.

Recommendation: Use AA alkaline dry cell batteries.

Troubleshooting (FAQ)

1. Mouse not working:
   • Verify correct battery polarity (+/-) alignment.
   • Ensure batteries are not discharged; try reinserting them.
   • Disable your computer's power management features.
   • Confirm the Nano receiver is securely plugged into the USB port.
   • If issues persist, try reconnecting the receiver and ensure the mouse is within the optimal operating distance (1.5m) from the receiver.
2. USB Nano receiver recognized, but cursor does not move:
   • Check if the low battery indicator is lit. If the sensor light is on, batteries may be discharged; replace them.
   • If replacing batteries doesn't help, ensure the mouse is properly connected to the receiver. Try reconnecting and verify the mouse is within the optimal operating distance (1.5m) from the USB Nano receiver.

Important Safety Instructions

• Save these instructions for future reference.
• Read all instructions and caution markings on the product and accessories before use.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a responsible person.
• Supervise children to ensure they do not play with the appliance.
• Keep the product away from fire or explosion hazards.
• Observe polarity indicators (+/-) for proper battery insertion.
• Remove batteries if the product will not be used for a long period.
• Do not place the product in or near flammable, explosive, or hazardous objects.
• Avoid exposure to water, rain, excessive moisture, or extreme heat.
• Do not operate the product with damaged cords or plugs.
• Do not operate the product if it has been damaged in any way.
• Do not disassemble the product; this may result in safety hazards.
• Do not throw or shake the product.
• To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.

Limited 12-Month Warranty

Shenzhen Unichain Technology Co., LTD. (Manufacturer: "Unichain") warrants the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship for a period of 12 months from the date of purchase.

Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

This warranty does not cover damage due to improper installation, alteration, misuse, or acts of God. For warranty claims, contact retailers or visit the TECKNET website at www.tecknetonline.com or support@tecknet.com for more information.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Correct Disposal of This Product

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

EU Declaration of Conformity

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type M006 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tecknet.com/support