GE NHL Model 71405LO / 71406LO Christmas Tree Topper Assembly and Lamp Replacement Instructions

Assembly Instructions

These instructions guide the assembly of the GE Christmas tree topper, model numbers 71405LO and 71406LO.

Step 1: Identify Assembly Parts

The following parts are included for assembly:

• 1 pc base unit with clip mechanism
• 1 pc pole
• 1 pc securing clip

[Diagram description: Shows the individual parts of the tree topper assembly: a base unit with a clip mechanism, a pole that inserts into the base, and a separate clip.]

Step 2: Insert Clip into Base of Tree Top

Insert the clip located on the base of the tree topper into the designated slot at the top of the Christmas tree.

[Diagram description: Illustrates a hand holding the tree topper base and inserting its clip into the top of a Christmas tree.]

Step 3: Assembly Complete

The tree topper is now fully assembled and ready for placement.

[Diagram description: Shows the fully assembled tree topper, attached to the top of a Christmas tree.]

Step 4: Secure to Tree Top

Ensure the clip is firmly attached to the tree top for stability.

[Diagram description: Close-up view of the clip being secured to the tree top, with hands guiding the process.]

Instruction for Lamp Replacement

[Diagram description: Shows a close-up of the lampholder assembly secured within a star-shaped frame by metal "O" rings.]

A) Lamp/Lampholder Assembly: The lamp/lampholder assembly is secured in the frame with metal "O" rings. To replace a burn-out bulb, pull the lampholder inwards towards the center of the star. This allows you to grip the lampholder and pull the lamp base straight out of the socket.

[Diagram description: Shows a hand holding a bulb by its plastic base and pulling it straight out of a socket.]

B) Replacing Burn-out Lamps: Hold the bulb by its plastic base and pull the bulb/base straight out of the socket. For more details, please refer to the safety instruction manual.