GE White Flocked Coral Decorative Tree

Introduction

Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree. Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information. You can call our toll-free number at 1-877-398-7337. Check our website for latest service hours and assembly instruction videos.

WARNING

Risk of fire and electric shock. Disconnect light set from power source before starting.

1. Keep wires clear of being pinched or cut during assembly or installation.
2. Do not press or grasp bulbs during assembly or installation.
3. Please read all instructions and warnings included with this product before using.

Assembly Steps

Step 1: Unpack and Inspect

Carefully unpack, removing any bubble wrap and inspect the contents of your tree. (See Illustration A).

Illustration A Description: Depicts the components to be unpacked: the 'Top section', 'Bottom section', 'Instruction manual', and 'Metal stand'.

Step 2: Assemble Tree Sections

The tree stand should be open and set at a 90° angle. Remember to tighten the thumbscrew after connecting the bottom section and tree stand. (See Illustration B).

Illustration B Description: Shows the 'Metal stand' opening to a 90° angle, with a 'Thumbscrew' highlighted for tightening to secure the tree.

Untie the red twist-tie to release branch panels. Gently position any branches that do not fall into place. Your assembled tree may be heavy and difficult to move when done, so place the stand in the desired location before assembling.

When connecting two tree sections, it is important that you align the square shape connector. (See Illustration C).

Assemble section by section.

Illustration C Description: Demonstrates the connection of tree sections, emphasizing the alignment of the 'square shape connector' for proper assembly.

Assembly Details

* Does not include time for shaping branches; estimated shaping time is 30 minutes/section.

Step 3: Electrical Connections

To electrically connect the lighted sections: First, locate the 2 white connector cord tags between each section. Then fully insert the 2-pin polarized male and female connectors. Fully screw on the cap to secure connection.

Step 4: Illuminate

To illuminate, find and unhook the long lead wire from the bottom lighted section. Fully insert the direct plug-in adapter into a working outlet.

Troubleshooting Tips

If one section of your tree does not illuminate, check that section for cut or damaged wires or that all electrical connections on the tree are made. Due to the unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light.

Tree Storage

Disconnect the decorative item from the power source before performing any maintenance or cleaning.

1. Remove the tree's main extension cord plug from the wall outlet.
2. Starting at the top, disconnect the top and section A.
3. Step A: Gently fold the branches up toward the center. Care should be taken to avoid damage to the lights.
4. Disconnect sections A. Refer to the drawing on how to repack your tree.

Storage Diagram Description: A diagram illustrates the storage process for 5 FT TREES, showing how to fold branches upwards towards the center and indicating the 'TOP' of the carton for proper storage.

IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.

NO Spare Bulbs

Product Information

For indoor use only. 120V.

THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.

GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd.

©2020 Nicolas Holiday Ltd. 9 F., No. 37, Guangfu North Rd., Taipei, Taiwan 10560. All rights reserved. Printed in China. 20005LO