Safety Warnings
- Do not use this product if your dog is aggressive or prone to aggressive behavior. Aggressive dogs can cause severe injury or death.
- If unsure about suitability for your dog, consult a veterinarian or certified trainer.
- Place the kennel on a flat, stable surface.
- Risk of injury! Do not climb on or play around the kennel. It is not a toy or playground.
- Handle steel tubes with care, as they may have sharp edges.
- Wire ends can be sharp; work gloves are recommended.
- Do not leave a dog in the kennel outdoors in extreme hot or cold weather without adequate shelter.
- Do not keep your pet in the product for extended periods.
- Misuse can lead to injury to the pet or owner, and damage to the product.
- Ensure the door is properly locked when closed.
Acclimating Your Pet
Pets may feel comfortable in a safety enclosure, but a brief introduction period is advisable. Start by placing your pet in the kennel for short periods (10-20 minutes) throughout the day, observing their behavior. If signs of discomfort or nervousness appear (e.g., barking, whining), offer verbal correction from a distance. Gradually increase the duration of stay as the pet becomes more comfortable. Providing toys can also offer comfort. Ensure clean water and adequate food are always available.
Parts List
| Part Label | Description | Quantity |
|---|---|---|
| Ax4 | Frame Pole | 4 |
| Bx2 | Frame Pole | 2 |
| Cx4 | Frame Pole | 4 |
| Dx4 | Frame Pole | 4 |
| Fx1 | Door Panel | 1 |
| Gx48 | Wire Mesh Panel | 48 |
| Hx2 | Hinges | 2 |
| Ix1 | Door Latch Mechanism | 1 |
| Jx4 | Connectors/Clips | 4 |
| Kx1 | Door Lock Mechanism | 1 |
| Lx1 | Tension Spring/Wire | 1 |
| Mx1 | Fastener (M6x30mm) | 1 |
| Nx2 | Fastener (M6x40mm) | 2 |
| Qx16 | Connectors/Clips | 16 |
| Rx14 | Connectors/Clips | 14 |
| Vx4 | Connectors/Clips | 4 |
| Zx8 | Connectors/Clips | 8 |
Assembly Instructions
Follow these steps to assemble your vidaXL Outdoor Dog Kennel:
- Frame Construction: Begin by assembling the main frame. Connect the frame poles (A, B, C, D) using the various connectors and clips (Q, R, Z). Start by creating the base rectangular sections, then attach the vertical poles, and finally the top frame pieces. Ensure all connections are secure.
- Mesh Panel Installation: Attach the wire mesh panels (G) to the assembled frame. The panels are designed to slot into grooves or be secured with clips along the frame poles.
- Door Assembly: Assemble the door by attaching the hinges (Hx2) and the latch mechanism (Ix1) to the door panel (Fx1). Secure the lock mechanism (Kx1) as well.
- Door Installation: Mount the assembled door onto the main kennel frame using the provided hinges.
- Final Securing and Tensioning: Use the remaining fasteners (Mx1, Nx2) and connectors (V) to reinforce all joints and ensure the structure is rigid. The tension spring/wire (Lx1) may be used to keep the mesh panels taut or for additional security, as indicated in the diagrams.
