Dreame Robot Vacuum L10S Ultra Gen 2

Safety Information

To prevent electric shock, fire, or damage from improper use, please read this user manual carefully before using the device and keep it for future reference.

Usage Restrictions

• This product should not be used by children under 8 years of age, or persons with reduced physical, sensory, or intellectual capabilities, or lack of experience and knowledge, without supervision from a parent or guardian to ensure safe operation and avoid any risks. Cleaning and maintenance by children should not be performed without supervision.
• The device must only be used with the power supply provided with the device.
• This device contains components that can only be replaced by qualified personnel.
• Clear the area to be cleaned. Children should not play with the device. Ensure children and pets remain at a safe distance from the robot during its operation.
• Do not install, charge, or use the device in bathrooms or near swimming pools.
• This product is intended for indoor floor cleaning only. Do not use it outdoors, on non-floor surfaces, or in commercial or industrial environments.
• Ensure the device operates correctly in the appropriate environment. Otherwise, do not use the device.
• If the power cord is damaged, it must be replaced by the manufacturer or its service agent with a special cable or assembly purchased from the manufacturer.
• Do not operate the robot on elevated surfaces without a protective barrier.
• Do not place the robot upside down. Do not use the LDS cover, robot cover, or bumper as a handle for the robot.
• Use the robot in an environment where the ambient temperature is above 0°C and below 40°C. Ensure there is no liquid or sticky substance on the floor.
• To prevent damage or displacement, remove any loose objects and cables or power cords from the cleaning path before using the device.
• Remove fragile or small items from the floor to prevent the robot from colliding with and damaging them.
• Keep hair, fingers, and other body parts away from the robot's suction inlet.
• Keep the cleaning tool out of reach of children.
• Do not use the device in a room where an infant or child is sleeping.
• Do not place children, pets, or any other items on the robot, whether it is stationary or moving.
• Only clean water and officially approved cleaning solution may be added to the clean water tank. Do not add other liquids such as alcohol or disinfectant. You can check the ratio of cleaning solution and clean water on the cleaning solution bottle. Keep the cleaning solution out of reach of children.
• Do not use the robot to clean flammable objects. Do not use the robot to collect flammable liquids, corrosive gases, undiluted acids, or solvents.
• Do not vacuum hard or sharp objects. Do not use the device to collect items such as stones, large pieces of paper, or any item that may block the device.
• Before cleaning or maintaining the device, the plug must be removed from the socket.
• Do not clean the robot or base station with a wet cloth, nor rinse them with any liquid. After cleaning washable parts, dry them completely before reinstallation and use.
• Please use this product in accordance with the instructions in the user manual. Users are responsible for any loss or damage caused by improper use of this product.
• Instructions for devices equipped with a liquid distribution system indicate the quantity and type of liquid to be used. [IEC 60335-2-10]

Battery and Charging

• Do not use third-party batteries or base stations. The robot can only be used with the RCLE0304 model base station.
• Do not attempt to disassemble, repair, or modify the battery or base station independently.
• Do not place the base station near heat sources.
• Do not use a wet cloth or wet hands to clean or wipe the charging contacts of the base station.
• Do not dispose of old batteries improperly. Unused batteries should be disposed of at an appropriate recycling point.
• If the power cord is damaged or broken, stop using it immediately and contact after-sales service.
• Ensure the robot is turned off during transport and, if possible, store it in its original packaging.
• If the robot is not used for a long time, charge it fully, then turn it off and store it in a cool, dry place. Recharge the robot at least once every 3 months to prevent excessive battery discharge.

Laser Safety Information

The laser sensor in this product complies with the IEC 60825-1:2014/EN 60825-1:2014/A11:2021 standard for Class 1 laser products. Please avoid direct eye contact during use.

Class 1 Laser Product.

User-accessible laser product.

Declarations and Notes

EN 50689:2021

Hereby, Dreame Trading (Tianjin) Co., Ltd. declares that the radio equipment type RLL32SE complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://global.dreametech.com. The product complies with UK PSTI regulations. The full text of the Declaration of Conformity is available at the following internet address: https://global.dreametech.com. For a detailed electronic manual, please visit https://global.dreametech.com/pages/user-manuals-and-faqs.

Note: Press any button on the robot to pause before starting the cleaning or charging process.

Child lock can be enabled/disabled via the Dreamehome app.

The auto-fill and auto-empty water connection kit must be purchased separately. (Available in certain regions only)

On first use, follow the robot during cleaning to promptly remove any potential obstacles.

Do not vacuum hard objects such as stones, steel balls, and toy parts, or sharp objects such as construction debris, broken glass, and nails, as this may scratch the floor.

Technical Specifications

The robot and base station/charging dock do not have a standby mode or equivalent states regarding standby requirements, power management functions, or the ability to disable wireless network connections due to battery maintenance needs. The equipment's power consumption is likely to be higher than other equipment models that meet these functional requirements.

Under normal usage conditions, there should be a minimum distance of 20 cm between the antenna and the user's body.

Note: Nominal power (during charging and drying) is determined by the power value during the full load period.

Battery Recycling and Removal

The built-in lithium-ion battery contains environmentally hazardous substances. Before recycling the battery, ensure it is removed by qualified technicians and disposed of at an appropriate recycling facility.

• The battery must be removed from the device before scrapping.
• The device must be disconnected from the power supply when removing the battery.
• The battery must be disposed of safely.

Caution:

• Before removing the battery, disconnect it from the power supply and discharge it as much as possible.
• Unused batteries must be disposed of at an appropriate recycling facility.
• To avoid the risk of explosion, do not heat in high-temperature environments.
• If battery fluid leaks, rinse with water and consult a doctor.

Removal Instructions:

1. Turn the robot over, use the appropriate tool to remove the screws on the back of the robot, and then remove the cover.
2. Disconnect the terminals between the battery and the PCB board to remove the battery.

Information about Electrical and Electronic Equipment

All products bearing this symbol represent waste electrical and electronic equipment (WEEE, as defined in Directive 2012/19/EU), which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by transferring your waste to a special collection point for the recycling of waste electrical and electronic equipment, designated by the government or local authority. Proper recycling will help prevent potential negative consequences for the environment and human health. Please contact your installer or local authority for more information on the location and conditions of such collection points.

Company Information

The word "dreame" is an abbreviation for Dreame Technology Co., Ltd. and its subsidiaries in China. It is a transliteration of the company's Chinese name, meaning "striving for perfection in all endeavors," and reflects the company's vision for continuous pursuit, research, and exploration in the field of technology.

For additional support, please contact us at https://global.dreametech.com.

Manufactured by: Dreame Trading (Tianjin) Co., Ltd.

Made in China.

Certifications: [CE Mark], [Laser Symbol], [Recycling Symbol 22], [Battery Symbol 1]