JUGBOW User Manual

Model DT-68

For more training tutorial videos, please visit: Jugbow.com

Follow us on social media: [Pinterest] @Jugbow, [Facebook] @Jugbow, [Instagram] @Jugbow, [Twitter] @Jugbow

Components

The JUGBOW DT-68 Dog Training System includes the following components:

1. Handheld Remote: The control unit for operating the system.
2. Receiver: The collar unit that attaches to the dog's neck.
3. Charging Cable: Used to charge both the remote and the receiver.
4. Neck Strap: For attaching the receiver collar to the dog.
5. User Manual: This document.
6. Quick Operation Guide: A brief guide for quick setup.
7. Test Light Tool: Used to test the electric shock function.
8. Long Contact Point: Longer contact points for dogs with thicker coats.
9. Conductive Silicone Cap: Silicone caps to make contact points softer.

Product Description

Handheld Remote

The Handheld Remote features a digital display showing various settings. Key controls include:

• Digital Display: Shows status like channel, intensity levels, and battery.
• Adjustable Vibration: Controls vibration intensity.
• Beep Tone: Activates an audible tone.
• Electric Shock: Activates static stimulation.
• Shock Boost: Increases the shock level.
• Channel Select: Switches between paired receivers (e.g., Channel 1, Channel 2).
• Keypad Lock: Prevents accidental button presses.
• Vibration Level: Adjusts the intensity of vibration.
• Electric shock "-" and "+" buttons: Adjust the intensity of electric shock.

The screen content displays:

• Channel Display 1-2: Indicates the current channel.
• Static Warning: A warning indicator.
• Vibration: Indicates vibration status.
• Vibration Intensity: Shows the current vibration level (e.g., 1-9).
• Keypad Lock: Indicates if the keypad is locked.
• Static Level Display (00-99): Shows the current static stimulation level.
• Sound: Indicates tone function.
• Battery Status (Remote): Shows remaining battery life.

Receiver

The Receiver unit, worn on the dog's collar, includes:

• LED Status Light: Indicates power and charging status.
• ON & OFF Switch: Powers the receiver on and off.
• Charging Power Indicator: Shows charging progress.
• Magnetic Charging Port: Connects to the charging cable.

Important Safety Information

WARNING: Not for aggressive dogs. Do not use this product if your dog is aggressive or prone to aggressive behavior, as this can cause severe injury or death. If unsure about suitability, consult your veterinarian or a certified trainer.

CAUTION: Please read the user manual carefully before use to avoid injury from improper use. Proper fit of the collar is important; a collar worn too long or too tight can cause skin damage, ranging from redness to pressure ulcers.

• Avoid leaving the receiver on the dog for more than 12 hours per day.
• Reposition the receiver on your dog's neck every 1-2 hours.
• Check the fit to prevent excessive pressure; follow instructions in this manual.
• Never connect a leash to the electronic collar, as it will cause excessive pressure on the contacts.
• When using a separate collar for a leash, do not put pressure on the electronic collar.
• Wash the dog's neck area and the collar contacts weekly with a damp cloth.
• Check the contact area daily for signs of a rash or sore. If found, discontinue use until the skin has healed.
• Do not use an adapter with an output greater than 5V/1A for charging.
• Avoid contact with other metals while charging to prevent short circuits.

CAUTION (Safety during on-leash training): It is vital that you and your dog remain safe. Your dog should be on a strong leash, long enough to chase an object but short enough to prevent reaching unsafe areas. You must be physically strong enough to restrain your dog. This pet training device is not a toy; keep away from children.

Operating Guide

1. Charging Instructions (2h charging time)

Blue model: When charging is complete, the green light will appear. Charging takes approximately two hours.

Orange model: When charging is complete, the yellow light will appear. Charging takes approximately two hours.

[Diagram showing remote and receiver connected to charging cable and power source.]

2. Wearing Instructions

Note: The Contact Points must have direct contact with the dog's skin on the underside of the neck. Check the tightness of the collar by inserting one finger snugly between the collar and the dog's neck.

[Diagram showing a dog wearing the collar correctly, with a close-up of the collar fit.]

3. Switch Description of Transmitter and Receiver

Turn ON the Receiver: Hold the ON button for 1 second.

Turn OFF the Receiver: Hold the ON button for 3 seconds.

[Diagram showing the receiver with its ON/OFF button and indicator lights.]

4. Switch Lock Description

Security Keypad: Lock or unlock the remote's buttons to prevent accidental activation.

[Diagram showing the remote with the keypad lock feature highlighted.]

5. Explanation of Voice Commands

Beep command: Delivers a beep tone with non-adjustable volume to the collar.

[Diagram showing the remote sending a beep to the dog's collar.]

6. Description of the Vibration Command (How to adjust the level)

Vibration command: Press the vibration key; the receiver vibrates once.

Intensity adjustment: After pressing the side vibration button, adjust the vibration level (1-9) using the side vibration button.

[Diagram showing the remote and dog receiving vibration, with intensity adjustment buttons.]

7. Instructions for the Electric Shock Order (How to adjust the level)

Static button: Delivers the currently selected level of static stimulation to the collar.

Static + button: Delivers a level 10% higher than the currently selected level.

Static Intensity adjustment: After pressing the static button, adjust the static level using the "+" and "-" buttons.

[Diagram showing the remote, electric shock contacts, and intensity adjustment buttons.]

8. How to Unlock Channel 2

The default setting upon factory release is Channel 1. To pair a second receiver:

1. Follow the instructions in step eight of the operation guide to unlock Channel 2 first.
2. Ensure the second receiver is powered off.
3. Press and hold the power button on the receiver for 5 seconds until the green (or yellow) light flashes quickly.
4. Use the transmitter's channel button to select the desired channel.
5. Press the transmitter's pairing button to initiate pairing.
6. When pairing is successful, the receiver will emit a "beep" sound and the green (or yellow) light will stop flashing.

Note: The receiver will only work on the corresponding matching channel.

[Diagram showing the pairing process with the remote and receiver.]

Main Features

• ⚡️3 Training Modes: Vibration, Tone, and Shock.
• ?️Adjustable Levels: 9-Speed vibration adjustable and 0-99 shock adjustable.
• ?Waterproof: Receiver Collar IPX8 Waterproof, Remote IPX4 Waterproof.
• ?Remote Range: 4200 Ft.
• ?Battery: 2-Hour Rapid Charging Lithium Polymer Battery.
• ?️Display: Big Digital Display Shows Intensity Level, Battery, and Dog Status.
• ➕Expandable: Support 2 Receiver Collars with One Remote.
• ?Charging: Magnetic Charging Port.

Use of the Test Light Tool

A: Electric Shock Test

1. Make sure the Remote and Receiver Collar are ON.
2. Hold the Test Light tool contacts to the Contact Points on the receiver collar.
3. Press a Static button on the Remote Transmitter. The Test Light will be illuminated if the shock function is working.

[Diagram showing the Test Light Tool being used on the receiver's contact points.]

B: As a tool to tighten or loosen the contact points

• For dogs with shorter coats, use the 2 shorter contact points.
• For dogs with thicker coats, use the 2 longer contact points.
• Install the conductive Silicone cap onto the contact point to make it softer and more comfortable for your dog's skin.

[Diagram showing different contact points and the silicone caps being installed.]

Training Tips

1. Reward your dog with food/treats to help achieve the best training results.
2. Do not use the device on dogs aged below 6 months, pregnant dogs, easily frightened dogs, aggressive dogs, dogs in heat, or dogs in inferior health conditions.
3. Use verbal commands first, and supplement with a corrective stimulus only as needed. Be consistent with your verbal commands, using the same words every time. Work with your pet on one behavior at a time to avoid confusion and frustration.
4. Use as little stimulus as possible and only to reinforce verbal commands when necessary. Do not over-correct your dog.
5. For example, use the beep sound as a warning by pressing the beep button. The dog will become conditioned to the beep preceding the corrective stimulus and will soon learn to recognize the beep as a warning along with your verbal command.
6. Do not rely on this product solely to train your dog. Some dogs will not respond to this product. JUGBOW cannot guarantee the effectiveness of this or any trainer on your dog. If your dog shows signs of growling, biting, or aggression while using the collar, discontinue use immediately and contact a professional trainer for advice.
7. It is recommended to train one dog at a time in a distraction-free environment, both to increase efficiency and to avoid temptation or distraction from other dogs.

Pairing Instructions

How to pair the second receiver:

Note: The default pairing upon factory release is Channel 1.

1. Follow the instructions in step eight of the operation guide to unlock Channel 2 first.
2. Ensure that the second receiver is in the powered-off state.
3. Press and hold the power button on the receiver for 5 seconds until the green (or yellow) light flashes quickly.
4. Use the transmitter's channel button to select the desired channel.
5. Press the transmitter's pairing button to initiate pairing.
6. When pairing is successful, the receiver will emit a "beep" sound and the green (or yellow) light will stop flashing.

NOTE: The receiver will only work on the corresponding matching channel.

[Diagram showing the pairing process with the remote and receiver.]

Question & Answer

How to change the longer prongs for this collar? I don't think they are getting through my Lab's thick hair.

Answer: Just part the hair or trim it a bit. If you have a dog with very thick neck hair, part it with your hands. Ensure the remote is off, then start on a low setting and work your way up. If there is no response, repeat the steps of working the prongs through the hair, remembering to turn off or lock the remote.

Is the Vibration/Shock safe for my pet?

Answer: While the Vibration/Shock is unpleasant, it is harmless to your pet. Electronic training devices require interaction and training from the owner to achieve desired results.

Troubleshooting

1. My pet is not responding when I press a beep, vibration, or static button.

• Check if the Receiver Collar is ON.
• Please check if the battery is low in either the Remote Transmitter or Receiver Collar.
• Test the Receiver with the Test Light to confirm if shock functions normally.
• Increase the correction level. Refer to "Find the Best Stimulation Level For Your dog".
• Make sure the Receiver Collar's Contact Points are placed snugly against your pet's skin.

[Diagram showing the remote and receiver, and the test light illuminating.]

2. Remote/receiver does not response.

• Verify if the Receiver Collar is ON.
• Verify if the battery of the Transmitter is fully charged.
• Verify if the training collar has been paired.

[Diagrams showing receiver status lights and remote battery indicator.]

Operating Environment & Maintenance

Do not use the product in the circumstances as follow:

1. Do not operate the devices under temperatures of 104°F (40°C) and above, as high temperatures will decrease battery performance.
2. Do not use the set in places with strong electromagnetic interference, as this will compromise the product's performance.
3. Avoid dropping the devices on hard surfaces or inflicting excessive force on them.
4. Avoid using the devices in environments flooded with corrosive chemicals, as this may lead to color degrading, deforming, or cracking of the exterior.

Maintenance:

1. When not in use, please wipe clean both the Remote and Receiver with mild detergent. Turn off the Remote, lock the keypad, put on the rubber lid on the Receiver's charging port, and store the set in a cool, dry place.
2. During cleaning, wipe with a soft cloth and mild detergent. Do not use hard brushes, which may scratch the surface of the device.
3. If the Receiver has gotten dirty, wipe it clean with a damp cloth. Note: Do not submerge the Receiver into water for long periods, even though it is waterproof.
4. If the Remote fell into water, pick it up quickly and turn off the power. Dry it with a cloth as much as possible and let it air dry. It should resume function normally once the moisture is dried out.

Regarding you and the product

1. It is strictly prohibited to open the receiver in any situation. Doing so will likely compromise the waterproof function and void the product warranty.
2. Please use the remote control and the receiver from the complete set. Do not use other products to match with the receiver.
3. If you want to test the product, please use professional testing apparatus. Do not test with hands, to avoid accidental injury.
4. If water is found at the charging port, please wipe it dry before charging.
5. Beware of environmental interference, which can cause the product not to work properly. Examples include places with high voltage facilities, communication towers, thunderstorms, large buildings, and strong electromagnetic interference.
6. The included collar is a basic accessory and is not necessarily suitable for all types of dog breeds. Any collar not wider than 24mm and not thicker than 5mm, made of soft material, can be a replacement for the current collar.

Regarding well-being of your dog

1. The Receiver collar is not a regular collar and is not recommended to put on a leash to walk your dog. Doing so during pulling may hurt the dog due to protruding electrodes on the Receiver.
2. Do not put the collar on for over 12 hours; it may cause rashes or discomfort to your dog's skin.
3. Do not allow children, or anyone who has little or no experience with training dogs, to handle this training kit.
4. Static stimulation is not a pleasant experience for any dogs. Punishment is a harsh way to train a dog. Always, praise could encourage your dog for good behavior.

Terms of Use & Limitation of Liability

1. Use of this product means you accept all the terms and conditions.
2. This product is a professional dog training device. It is not recommended to use this product if your dog is clever and weighs less than 15 lbs. If you are unsure whether the product is suitable for your pet dog, please consult a professional handler or contact JUGBOW.
3. This product is a professional dog training device and should not be used for other purposes. Please do not violate local laws when using this product.
4. JUGBOW bears no liability for any direct or indirect losses caused by use or misuse of this product; all risks in using this product shall be borne by the user.
5. Please contact the dealer for parts warranty, goods return, or exchange. JUGBOW provides only technical support.
6. JUGBOW reserves the right to alter the terms, conditions, and notices of this product offered.

Reference Weight for Dogs

Product Specification

Reference Size for Different Dogs

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult customer care, the dealer, or an experienced radio/TV technician for help.

Warranty and repair information

1-Year Warranty

The original purchaser for this unit is provided with a 1-YEAR WARRANTY. The warranty begins from the date of purchase. For the first year, coverage is for both Parts and Labor on warranty repair services, but the return postage is for the buyer's account. Accessories such as chargers, straps, and batteries are covered for the first year only. When the warranty expires, customers will need parts and repairs at their own expense.

Won't Qualify for 1-Year Warranty

• JUGBOW does not offer warranty for products that have been bought secondhand or as a resold product.
• Manual damage or loss is not covered by the warranty.
• Any water damage on the Water Resistant Transmitters and the Water Resistant Receivers of our product series will not be covered.
• The warranty is void if the unit has been altered or an unauthorized person who attempts to repair work has damaged the unit.
• Replacement of batteries is not recommended during the warranty period. If the customer chooses to replace the batteries, any damage to the unit during the change-out by the owner will make the warranty void.

To activate the warranty

If there is a problem with your product, please send the following information to service@jugbow.com for after-sale service:

1. Your original order page.
2. Your current shipping address.
3. After confirming the information, JUGBOW will send you the replacement within 5 business days.