Jugbow DT-57 Dog Training Collar User Manual

Package List

The package includes:

• 1 x Remote Control
• 1 x Receiver
• 1 x Charging Cable
• 1 x Hand Strap
• 1 x User Manual
• 1 x Test Light Tool
• 2 x Long Contact Points
• 2 x Conductive Silicone Caps

Product Description

Remote Control

The remote control features:

• Mode Gear Adjustment
• Channel Display (1-2)
• Keypad Lock
• Beep Tone Button
• Shock Mode Button
• Vibration Mode Button
• Lighting Button
• Digital Display showing channel, static grade, battery status, vibration, and beep tone indicators.

Receiver

The receiver collar features:

• ON & OFF Switch
• LED Status Light
• Charging Power Indicator
• Loudspeaker
• Contact Points
• Magnetic Charging Port

Important Safety Information

WARNING

This product is not for aggressive dogs. Aggressive dogs can cause severe injury or death. Consult a veterinarian or certified trainer if unsure about suitability.

CAUTION

• Read the manual carefully to avoid injury from improper use.
• Ensure proper collar fit to prevent skin damage. A collar too long or tight can cause redness or pressure ulcers.
• Do not leave the receiver on the dog for more than 12 hours per day.
• Reposition the receiver on the dog's neck every 1-2 hours.
• Never connect a leash to the electronic collar.
• Wash the dog's neck area and collar contacts weekly with a damp cloth.
• Check the contact area daily for rashes or sores. Discontinue use if any are found until healed.
• Use only an adapter with an output of 5V/1A or less for charging.
• Avoid contact with other metals during charging to prevent short circuits.
• Do not attach magnetic wire and strong magnets together to avoid magnet breaking.
• For on-leash training, ensure the leash is long enough for the dog to chase but short enough to prevent reaching unsafe areas. Ensure you are physically strong enough to restrain your dog.
• This training device is not a toy and should be kept away from children.

Operating Guide

1. Charging Instructions (2h charging time):

   When charging is complete, the green light will appear. Charging takes approximately two hours.

   Diagram: Shows the remote and receiver connected to the charging cable.

2. Wearing Instructions:

   Note: The Contact Points must have direct contact with the dog's skin on the underside of the neck. Check collar tightness by ensuring two fingers fit snugly between the collar and the neck.

   Diagram: Shows a dog wearing the collar correctly.

3. Switch Description of Transmitter and Receiver:
   • Turn ON the Receiver: Hold the power button [⏻] for 1 second.
   • Turn OFF the Receiver: Hold the power button [⏻] for 3 seconds.

   Diagram: Shows the receiver with the power button highlighted.

4. Switch Lock Description:

   Security Keypad: Lock or unlock the buttons on the remote.

   Diagram: Shows the remote with the lock/unlock function indicated.

5. Beep Command Description:

   Send a beep to the collar. Volume adjustment is available with F1-F3 levels of sound. Long press the beep button for continuous beeping (stops after 10 seconds, repeats when pressed again).

   Diagram: Shows the remote and a dog reacting to the beep.

6. Vibration Command Description (How to adjust the level):

   Press the vibration key for a single vibration. Adjust intensity by pressing the vibration button, then rotating the top knob (01-03 gears). Long press the vibrate button for continuous vibration (stops after 10 seconds, repeats when pressed again).

   Diagram: Shows the remote and a dog reacting to vibration.

7. Description of Electric Shock Sequence (how to adjust the level):

   Static Button: Provides static stimulation. Press the shock button to adjust the mode, then turn the shock button to adjust intensity. Press and hold the shock button for continuous stimulation (up to 10 seconds, with a 5-second pause before reuse).

   Diagram: Shows the remote, receiver, and the shock function in action.

8. Lighting Description:

   Press the transmitter illumination button to turn on the receiver's light. Press again to turn it off.

   Diagram: Shows the remote activating the light on the receiver.

9. Channel Switching Instructions:

   Train up to 2 dogs simultaneously. Press the channel button to select a different channel.

   Diagram: Shows the remote with channel selection indicated.

10. Knob Electric Shock/Sound/Vibration Gear Adjustment:

    Press the button once before adjusting gears. Press continuously to switch between electric shock, sound, and vibration modes. Rotate the knob clockwise to increase the gear level (1 level per grid, 360 degrees). Rotate counter-clockwise to decrease the gear level.

    Diagram: Shows the remote and the adjustment knob.

Product Features

• 3 Training Modes: Beep, Vibration, Shock.
• Adjustable Levels: 01-03 for vibration, F1-F3 for beep tone, 00-16 for shock.
• Lightweight design reduces burden on the dog.
• Receiver Collar: IPX8 Waterproof. Remote: IPX4 Waterproof.
• Remote Range: 4200 FT.
• Battery: 2-Hour Rapid Charging Lithium Polymer Battery.
• Display: Color eye protection screen with digital display.
• Compatibility: Supports 2 Receiver Collars with One Remote.
• Charging: Magnetic Charging Port.

Use of the Test Light Tool

A: Electric Shock Test

1. Ensure the Remote and Receiver Collar are on.
2. Hold the Test Light tool contacts to the Contact Points.
3. Press a shock button on the Remote Transmitter; the Test Light will illuminate.

B: As a tool to tighten or loosen the contact points

• For dogs with shorter coats, use 2pcs shorter contact points.
• For dogs with thicker coats, use 2pcs longer contact points.
• Install the conductive Silicone cap onto the contact point to make it softer and potentially better for your dog's skin.

Diagram: Shows the test light tool and contact points, including silicone cap installation.

Training Tips

1. Reward your dog with food or treats for best results.
2. Do not use on dogs under 6 months, pregnant, easily frightened, aggressive, in heat, or with poor health conditions.
3. Use verbal commands first, supplementing with corrective stimulus only as needed. Be consistent with commands and work on one behavior at a time.
4. Use minimal stimulus, only to reinforce verbal commands when necessary. Avoid over-correction.
5. Use the beep sound as a warning before corrective stimulus. Dogs will learn to associate the beep with the command.
6. Do not rely solely on this product for training. Effectiveness varies by dog. If aggression occurs, discontinue use and consult a professional trainer.
7. Train one dog at a time in a distraction-free environment for efficiency and to avoid distractions.

Pairing Instructions

(Note: This step can be skipped as the device is paired at the factory.)

Pairing the remote with the receiver:

1. Ensure the receiver is turned off.
2. Press and hold the receiver switch for 6 seconds until the green light blinks rapidly.
3. Press the channel key to control the channel.
4. Press the remote control pairing button to pair the receiver.
5. Pairing is successful when the receiver beeps and the green light stops flashing.

Diagram: Shows the receiver and remote during the pairing process.

Question & Answer

• Can I train my two dogs at the same time? Yes, the remote can match up to two collars. Additional collars are needed for more dogs.
• My dog has thick long hair will the probes be long enough? The package includes short and long metal probes and silicone covers. Ensure the metal probe contacts the dog's neck.
• What exactly does the security lock function do? It protects against accidental button presses when the remote is in your pocket or backpack.
• Can the volume of the beep mode be adjusted? Yes, you can choose from F1-F3 different frequencies.

Troubleshooting

1. My pet is not responding when I press a beep, vibration, or static button.

• Check if the Receiver Collar is On.
• Check the battery level of both the Remote Transmitter and Receiver Collar. A red light indicates a low battery.
• Test the Receiver with the Test Light to confirm shock functions.
• Increase the correction level. Refer to "Find the Best Stimulation Level For Your dog".
• Ensure the Receiver Collar's Contact Points are placed snugly against your pet's skin.

Diagram: Shows the receiver collar with battery indicators and the remote with battery indicators.

2. Fail to match receiver with remote.

• Ensure the receiver is connected to a power source (charging mode only activates during charging).
• Hold the channel switch for more than 6 seconds; otherwise, matching will fail.
• If the problem persists, contact customer support to confirm if the receiver and remote are the same version.

Diagram: Shows the receiver being held for 6 seconds during pairing.

3. Remote/receiver does not respond.

• Verify if the Receiver Collar battery is fully charged.
• Verify if the Transmitter battery is fully charged.
• Verify if the training collar has been paired.

Diagram: Shows the remote and receiver with battery indicators.

Operating Environment & Maintenance

Do not use the product in the following circumstances:

• Temperatures of 104°F (40°C) and above, as this decreases battery performance.
• Places with strong electromagnetic interference.
• Dropping the devices on hard surfaces or subjecting them to excessive force.
• Environments with corrosive chemicals, which can cause color degradation or deformation.

Maintenance:

• When not in use, wipe the Remote and Receiver with mild detergent. Turn off the Remote, lock the keypad, and store in a cool, dry place.
• During cleaning, use a soft cloth and mild detergent. Avoid hard brushes that may scratch the device.
• If the Receiver gets dirty, wipe it clean with a damp cloth. Do not submerge the Receiver in water for extended periods.
• Before charging, dry any water stains on the charging port.
• If the Remote falls into water, retrieve it quickly, turn off the power, dry it thoroughly with a cloth, and allow it to air dry. It should resume normal function once completely dry.

Regarding you and the product

• The receiver is IPX8 waterproof (can be immersed in 1 meter of water for 30 minutes without affecting normal use).
• Use only the provided remote control and receiver. Do not mix with other products.
• For testing, use professional testing apparatus. Do not test with hands to avoid injury.
• Wipe the charging port dry if water is present before charging.
• Beware of environmental interference (e.g., high voltage facilities, communication towers, thunderstorms, large buildings) that can affect product performance.
• The included collar is a basic accessory. Collars up to 24mm wide and 5mm thick, made of soft material, can be used as replacements.

Regarding the well-being of your dog

• The Receiver collar is not a regular collar and is not recommended for walking your dog on a leash, as pulling may cause injury due to protruding electrodes.
• Do not leave the collar on for over 12 hours to prevent rashes or discomfort.
• Children or inexperienced individuals should not handle this training kit.
• Static stimulation is not pleasant for any dog. Punishment is a harsh training method; praise encourages good behavior.

Reference Weight for Dogs

Terms of Use & Limitation of Liability

• Using this product signifies acceptance of all terms and conditions.
• This is a professional dog training device. Not recommended for dogs under 8 lbs. Consult a professional handler if unsure about suitability.
• This product is intended for professional dog training use only and should not be used for other purposes or in violation of local laws.
• Jugbow is not liable for any direct or indirect losses resulting from product use or misuse. All risks are borne by the user.
• Contact the dealer for warranty, returns, or exchanges. Jugbow provides technical support only.
• Jugbow reserves the right to alter terms, conditions, and notices.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult customer care, the dealer, or an experienced radio/TV technician for help.

Product Specification

Warranty and repair information

1-Year Warranty

The original purchaser receives a 1-YEAR WARRANTY starting from the purchase date. Coverage includes Parts and Labor for repair services. Return postage is the buyer's responsibility. Accessories like chargers, straps, and batteries are covered for the first year. After the warranty expires, customers are responsible for parts and repair costs.

Won't Qualify for 1-Year Warranty

• Warranty is not offered for secondhand or resold products.
• Manual damage or loss is not covered.
• Water damage to Water Resistant Transmitters and Receivers is not covered.
• Warranty is void if the unit is altered or tampered with by unauthorized persons.
• Battery replacement by the customer during the warranty period is not recommended, as any damage during this process will void the warranty.

To activate the warranty

For after-sale service, send the following information to amazon: service@jugbow.com, tiktok: tkservice@jugbow.com:

1. Your original order page.
2. Your current shipping address.
3. Upon confirmation, a replacement will be sent within 5 business days.