E1320 Wi-Fi6 Wireless Router User Manual

Step 1: Install the Device

This section describes the physical installation of the E1320 Wi-Fi6 Wireless Router.

Diagram Description: The diagram shows the rear panel of the router with ports labeled WAN, LAN1, LAN2, LAN3, RESET, MESH/WPS, and POWER. An RJ-45 cable connects the router's WAN port to a modem or a network cable jack. Another RJ-45 cable connects a PC or Laptop to one of the router's LAN ports. Devices like a Laptop and Mobile Phone are shown connecting wirelessly via Wi-Fi. A power cable connects the router to a Power Outlet.

Connections:

• Connect the router's WAN port to your modem or network cable jack using an RJ-45 cable.
• Connect your PC or Laptop to one of the router's LAN ports using an RJ-45 cable.
• Connect the router to a power outlet using the provided power adapter.
• Wireless devices (Laptops, Mobile Phones) connect via Wi-Fi [?].

Step 2: Add the Router

This section guides users on adding the router to their network using the ZLife Lite mobile application.

1. Download and Install ZLife Lite: For iOS devices, download the ZLife Lite app from the App Store. For Android devices, download it from Google Play.

2. Add Device: Open the ZLife Lite app and tap "Add device".

   App Screen Description: The app screen shows a "No device" status with an "Add device" button.

3. Select Device Type: Tap "Wi-Fi Router" from the list of ZTE devices to add. The app indicates this is for devices connected via Ethernet cable.

   App Screen Description: A list of device types is shown, including ONT (fiber), DSL CPE (telephone line), and Wi-Fi Router (Ethernet cable). "Wi-Fi Router" is selected.

4. Connect and Power On: Connect the router's WAN port to the broadband port using a network cable. Power on the Wi-Fi router. The router's LED indicator should turn solid green.

   App Screen Description: A diagram shows the router connected to a broadband port via a network cable. Text indicates powering on the router and waiting for a solid green LED.

   Tap "Next" [➡️] in the app.

5. Scan QR Code or Enter Credentials: Scan the QR code [QR Code] located on the bottom of the router. If no QR code is present, you can manually enter your wireless account and password.

   App Screen Description: The app prompts to "Scan QR Code" or "Select Wi-Fi SSID". A QR code is displayed within a phone graphic. Text mentions scanning the QR code on the router or selecting its Wi-Fi SSID.

   Note for Android Users: If using an Android device, you may need to connect to the router's Wi-Fi manually after scanning the QR code. If you prefer not to enter the password manually, you can tap to copy it. This is due to Android security requirements.

6. Configure Network: After the router is successfully added, the "Configure network" screen will appear. Tap "Bind immediately". The router's indicator light should be green and steady [✔️], indicating successful configuration.

   App Screen Description: The app shows "Configuration completed" and "You can now experience the Internet!". A graphic indicates the LED indicator/WPS status.

   Note: For advanced configurations, access the router's web management page. The login address and default credentials are typically found on a label on the router.

Step 3: Set Up a Mesh Network

This step is optional and is only required if you wish to deploy multiple E1320 routers to extend your Wi-Fi coverage.

Method 1: Use ZLife Lite App for Connection

1. Ensure the router you have just configured is connected to the Internet.
2. Power on the new router and follow the instructions provided by the ZLife Lite app.
3. Once the new router is connected to the existing router, its LED indicator will turn solid blue.

Method 2: Use WPS Key for Connection

1. Ensure the router you have just configured is connected to the Internet.
2. Place the new router close to the existing router and power it on.
3. Press the WPS buttons [WPS Button] on both routers. The LEDs should blink green. The time between pressing the two WPS buttons should be less than 1 minute.
4. The pairing process may take up to 2 minutes. Upon completion, the new router's LED indicator will turn solid blue.
5. You can now move the new router to its intended location.

Troubleshooting

The Power Indicator is Off

Issue: The Power indicator on the front panel is off after the power button is pressed.

• Possible Cause: The power switch is not turned on.
• Possible Cause: The power adapter is not correctly connected to the device.
• Recommendation: Ensure you are using the power adapter supplied with the device.

Unable to Connect to the Network

Issue: Cannot connect to the network.

• Check: Verify that the Ethernet cable is correctly connected to the router's WAN interface and that the Ethernet cable is correctly connected to the LAN interface of your device (e.g., modem).
• Check: Ensure the WAN indicator on the front panel is on, and the Internet indicator is solid green [✔️] or flashing green.

Restore Factory Default Settings

Procedure: With the device powered on, use a needle or a similar pointed object to press and hold the RESET button for over 5 seconds. This will restore the device to its default factory settings.

FAQ (Frequently Asked Questions)

How to use the Repeater Mode?

Repeater mode is used to extend the Wi-Fi signals of an existing router or optical modem. This mode requires configuration via the Web interface; other modes may be self-adaptive.

1. After powering on the device, connect a computer to the device's LAN interface using a network cable.
2. Open a web browser and enter the address 192.168.50.1. Press Enter [Enter Key] to access the web page.
3. Enter the username and password. The initial username is "admin" and the initial password is "ZTE_Polar". Click "Login" [Login Button].
4. On the E1320's main page, navigate to "Management & Diagnosis" then select "Work Mode" to open the Work Mode page.
5. From the "Mode" drop-down menu, select "Repeater" and click "Apply" [Apply Button].
6. Extended Wi-Fi (Wired Mode): Connect the LAN interface of the existing router or optical modem to the WAN interface of the E1320 using a network cable.
7. Extended Wi-Fi (Wireless Mode): The WPS key can be used for pairing. If the existing router or optical modem does not support WPS key mode, follow these steps:
   • On the E1320's main page, select "Local Network" > "WLAN" > "WLAN Discovery" > "WLAN Discovery" to open the WLAN Discovery page.
   • Click "Scan wireless network", select the desired Wi-Fi network, and enter the password to connect.
8. After the device is networked, it can be managed via the ZLife Lite app by following the operations described in Step 2 and Step 3.

Document Information

Manual No: SJ-20220322181146-002

Edition Time: 2022-10-09 (R1.0)

CE Mark: CE

Address: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China

Postcode: 518057