Schneider Electric TeSys Deca Contactor Installation and Safety Guide

Model Numbers: CAD32-50A / LC1D09-32A

Important Safety Information

DANGER: HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. Disconnect all power before servicing equipment. Failure to follow these instructions will result in death or serious injury.

WARNING: HAZARD OF FIRE OR ELECTRIC SHOCK (FOR CONTACTOR WITH UL HI-FAULT SHORT CIRCUIT CURRENT RATINGS ONLY). The opening of the branch-circuit protective device may be an indication that a fault current has been interrupted. To reduce the risk of fire or electric shock, current-carrying parts and the other components of the controller should be examined and replaced if damaged. Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING: This product can expose you to chemicals including Antimony oxide (Antimony trioxide), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.

Product Overview

Schneider Electric TeSys Deca contactors are designed for motor starting and control applications. They are available in various ratings and configurations to suit different industrial needs.

Energy Efficiency: 3P AC TeSys Deca contactors are grade 3 (LC1D09 -> LC1D18) and grade 2 (LC1D25 -> LC1D38) according to GB 21518. Maximum power consumption is lower than 9.5 VA.

Note: For motor starting, use Schneider Electric TeSys Protect - Deca overload relays.

Installation and Wiring

General Instructions:

Mounting and Wiring Diagrams:

The document provides detailed diagrams for the installation and wiring of various TeSys Deca contactor accessories, including:

Wiring Considerations:

Technical Specifications and Ratings

UL/CSA Lighting Ratings

Device/设备 Ballast, 600V/镇流器 Tungsten, 480 Y / 277 V 钨丝灯
LC1D09 20 A 20 A
LC1D12 25 A 25 A CSA only
LC1D18 32 A 25 A
LC1D25 40 A 40 A
LC1D32 40 A 40 A

Only applicable for UL/CSA marked products except DC coil.

Definite Purpose Ratings (3 Phase, Load wiring: breaking all lines)

Hermetic refrigeration compressor

Elevator Duty HP Ratings

Device/设备 FLA LRA One Phase/单相 230 V One Phase/单相 200/208 V Three Phases / 三相 230 V Three Phases / 三相 460 V Three Phases / 三相 575 V
LC1D09 9 54 45 36 - - -
LC1D12 12 72 60 48 1.5 2 3 7.5 7.5
LC1D18 18 108 90 72 3 5 5 - -
LC1D25 25 150 125 100 3 5 7.5 15 20
LC1D32 32 192 160 128 5 10 7.5 - -

Manufacturer Information

Schneider Electric Industries SAS
35 rue Joseph Monier
92500 Rueil-Malmaison
France
www.se.com

Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk

Models: CAD32-50A, LC1D09-32A, CAD32-50A Screw Clamp Terminals, CAD32-50A, Screw Clamp Terminals, Clamp Terminals, Terminals

File Info : application/pdf, 4 Pages, 2.30MB

PDF preview unavailable. Download the PDF instead.

navod-k-obsluze-a-bezpecnostni-pokyny-3412577-schneider-electric-lc1d09ap7-stykac-1-ks

References

Adobe PDF library 17.00

Related Documents

Preview Altistart 48 Panel-Mount Soft Starts: Wiring Diagrams & Component Selection Guide
Comprehensive guide to recommended wiring diagrams and component selection for Schneider Electric's Altistart 48 Panel-Mount Soft Starts, including contactor and disconnect recommendations for various motor applications.
Preview Schneider Electric LAD6K10M Contactor Mechanical Latch Contact Block IEC - Product Data Sheet
Technical specifications and product data for the Schneider Electric LAD6K10M TeSys mechanical latch contact block, including compatibility, voltage, durability, environmental data, and packaging information.
Preview Schneider Electric AC Contactor CB Test Certificate - IECEE Scheme
Official IECEE CB Scheme Test Certificate for Schneider Electric AC Contactors (LC1D/LC2D series). Details product conformity, specifications, and adherence to IEC standards like IEC 60947-4-1.
Preview Schneider Electric TeSys Deca LC1D25 Contactor - Technical Specifications and Data
Detailed technical data sheet for the Schneider Electric TeSys Deca LC1D25 IEC contactor. Includes specifications for motor control, power ratings, electrical and mechanical durability, environmental data, and ordering information.
Preview Schneider Electric TeSys D Contactors Installation and Usage Guide
Comprehensive guide for installing and using Schneider Electric TeSys D contactors, including safety precautions, wiring diagrams, and technical specifications. Covers various models and accessories for electrical applications.
Preview TeSys Deca LX1D8 Contactor Coil 220V AC 50/60Hz - Product Data Sheet
Technical specifications and environmental data for the TeSys Deca LX1D8 contactor coil, designed for 115A and 150A contactors. Includes details on coil voltage, resistance, durability, environmental impact, and packaging.
Preview Schneider Electric LC1D/LC2D Series Contactors: Technical Specifications and Installation Guide
Comprehensive guide to Schneider Electric's LC1D and LC2D series contactors, covering product specifications, safety warnings, installation procedures, dimensions, wiring, and accessories. Features detailed information for electrical engineers and technicians.
Preview Schneider Electric TeSys Catalog 2024: Motor Control Solutions
Explore the Schneider Electric TeSys Catalog 2024, featuring innovative and connected solutions for motor starters, control, protection, and power management. Discover a century of expertise in motor control technology.