Important Information
EN: IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR: IMPORTANT: A LIRE ATTENTIVEMENT ET À CONSERVER POUR CONSULTATION ULTÉRIEURE.
ES: IMPORTANTE, LEA Y GUARDE PARA FUTURAS REFERENCIAS.
PT: IMPORTANTE, RETER PARA REFERÊNCIA FUTURA: LEIA ATENTAMENTE.
DE: WICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTER NACHSCHLAGEN AUFBEWAHREN.
IT: IMPORTANTE! CONSERVARE IL PRESENTE MANUALE PER FUTURO RIFERIMENTO E LEGGERLO ATTENTAMENTE.
Assembly requires approximately 0.5 hours and involves 7 steps. ⏱️ 7 STEPS
Parts List
- Part A (T-joint)x 4
- Part D (90° corner joint)x 8
- Part L (Tube)x 10
- Part F (U-shaped clip)x 4
- Part G (Cover)x 1
- Connector (Type 1)x 20
- Connector (Type 2)x 8
Assembly Instructions
Step 1: Base Assembly
Construct the rectangular base frame. Use eight 90° corner joints (Part D) and ten tubes (Part L). Connect the tubes to the corner joints using twenty Type 1 connectors.
Visual representation: A square frame formed by tubes and corner joints, with connectors indicated.
Step 2: Vertical Frame Construction
Build the vertical supports. Use four T-joints (Part A) and eight Type 2 connectors. Attach the T-joints to the corners of the base frame. Connect vertical tubes (Part L) to the base and the T-joints using the connectors.
Visual representation: A cube-like frame is formed by adding vertical and horizontal tubes to the base, using T-joints and connectors.
Step 3: Adding Intermediate Supports
Continue building the frame structure by adding additional horizontal tubes at mid-height on the sides, connecting the vertical supports to create a multi-level frame.
Visual representation: The cube-like frame is further reinforced with horizontal members at different levels.
Step 4: Securing the Frame
Attach four U-shaped clips (Part F) to the bottom corners of the frame for stability.
Visual representation: U-shaped clips are inserted into the base corners of the assembled frame.
Step 5: Attaching the Cover
Place the cover (Part G) over the assembled frame. The cover is a rolled-up sheet with a top bar, designed to be unrolled and attached.
Visual representation: The cover is being draped over the top of the frame.
Step 6: Finalizing Assembly
The assembly is complete. The cover is fully attached, forming the greenhouse structure.
Visual representation: The completed greenhouse structure with the cover in place.
Customer Support Information
For customer assistance, please refer to the contact details provided by the respective regional importers, including Aosom LLC (US), Aosom Canada Inc. (CA), MH Handel GmbH (DE), AOSOM Italy srl (IT), SPANISH AOSOM, S.L. (ES), MH STAR UK LTD (UK), and MH FRANCE (FR).
