Overview
This document provides comprehensive assembly instructions for the Outsunny greenhouse, model numbers IN221001942V01_GL, 845-058, and 845-058V00.
It details essential safety precautions, recommended tools, and a complete parts list to ensure a smooth and safe setup process.
Safety First
- Maintain a clean and dry work area to prevent injuries.
- Stay alert and use common sense throughout the assembly.
- Wear safety gloves, eye protection, and long sleeves for personal safety.
- Ensure children and pets are kept away from the construction site.
- Position the greenhouse on a flat, level surface for stability.
Assembly Guidance
- The assembly typically involves around 29 steps and takes approximately 5 hours.
- Correct orientation of polycarbonate panels is crucial; the UV-protected side must face the sun.
- For enhanced stability, especially in windy conditions, consider using glue, tape, or additional screws between panels and the frame.
- If you encounter difficulties during assembly, loosen relevant screws for adjustment before re-tightening.
Parts Identification
A detailed parts list is provided, categorized into BASE, WINDOW, WALL AND ROOF, SCREW, DOOR, and PLASTIC components, including part numbers (e.g., F-01, G-P1) and quantities.
