Votomy VT360 Portable Bluetooth Speaker

Power Input & Connectivity

Power Input: 5V/2A or 5V/1A. Aux In port available.

Bluetooth Connection

Ensure your mobile device is within 10 meters of the speaker.

1. When the speaker is off, press and hold the [Power] button until a rising tone is heard and the LED indicators blink blue.
2. On your mobile device, go to Bluetooth settings, search for, and select "VT360".
3. Upon successful pairing, the LED indicators will turn solid blue.

Bluetooth Version: 5.0

Video Guide: [Video Link]

Bluetooth Disconnection

To disconnect the current Bluetooth device and re-enter pairing mode, press and hold the [Bluetooth] button until the LED indicator blinks blue rapidly.

Video Guide: [Video Link]

Wireless Stereo Pairing (TWS)

To enable True Wireless Stereo (TWS) pairing:

1. On one speaker, long press the [Power/Bluetooth] button to enter TWS pairing mode (master speaker). If pairing fails, clear existing pairing information on both speakers.
2. On your mobile device, enable Bluetooth and connect to "VT360". Stereo sound will then play from both paired speakers.
3. After successful TWS pairing, the LED indicator on the main speaker will flash blue slowly.

Video Guide: [Video Link]

Disconnect TWS Connection

To disconnect the TWS pairing, long press the [Bluetooth] button on either speaker for 3 seconds. The LED indicator will blink blue rapidly, indicating TWS disconnection.

AUX IN Mode

To use the AUX input:

1. Power on the speaker.
2. Connect your external audio device to the speaker's AUX IN port using an AUX cable.
3. The speaker will automatically switch to AUX IN mode, and the LED indicators will turn solid green.

How To Reset

To reset the speaker, press and hold the [Power/Bluetooth] button for 10 seconds.