Assembly Instructions: Render End Table
Getting Started
Read through all instructions before starting. ?
Care instructions are in the last step. ?
Use only hand tools. Do not use power tools. Do not tighten bolts completely until all hardware is lined up. Avoid over-tightening. ⚠️
Estimated assembly time: 60 minutes. ⏰
Two people recommended for assembly. ?
Ensure all parts and components are present before discarding packing materials. ✔️
Keep components and packaging away from children and animals. ?
Furniture Components
| Part | Description | Quantity |
|---|---|---|
| 1 | Top Board | x1 |
| 2 | Bottom Board | x1 |
| 3 | Side Board Left | x1 |
| 4 | Side Board Right | x1 |
| 5 | Leg | x4 |
| 6 | Front Drawer | x1 |
| 7 | Side Drawer Left | x1 |
| 8 | Side Drawer Right | x1 |
| 9 | Back Drawer | x1 |
| 10 | Bottom Drawer | x1 |
| 11 | Back Board | x1 |
Provided Hardware
| Identifier | Description | Quantity |
|---|---|---|
| A | Cam Bolt Ø6 x 35 mm | x4 |
| B | Cam Bolt Ø6 x 32 mm | x4 |
| C | Cam Lock Ø15 mm | x4 |
| D | Cam Lock Ø12 mm | x4 |
| E | Wood Dowel Ø8 x 30 mm | x12 |
| F | Screw M 7 x 50 mm | x8 |
| G | Allen Key | x1 |
| H | Screw M 8 x 39 mm | x4 |
| I | Floor Protector | x4 |
| J | Screw M 6.5 x 10.5 mm | x4 |
| K | Screw M 3.5 x 13 mm | x6 |
| RM30A | Drawer Runner | x1 |
What You Need:
Phillips Head Screwdriver ?️
Assembly Steps
Step 1
Attach legs (5) to the top board (1). Insert cam bolts (A) into the top board. Insert wood dowels (E) into the legs. Align legs with the top board and secure with cam bolts (A). The diagram shows cam bolt (A) being inserted into the top board (1) and leg (5) with dowel (E) being attached. A visual shows the correct orientation of cam bolt (A) and the incorrect orientation.
Hardware Used:
- Cam Bolt Ø6 x 35 mm (A) x4
- Wood Dowel Ø8 x 30 mm (E) x4
Components Used:
- Top Board (1) x1
- Leg (5) x4
Step 2
Attach drawer runners (RM30A) to the side boards (3 and 4). Insert wood dowels (E) into the side boards. Attach drawer runners (RM30A) to the side boards using screws (J). The diagram shows drawer runner (RM30A) being attached to side board left (3) and side board right (4) using screws (J) and dowels (E). Close-up views show the correct placement of the runner.
Hardware Used:
- Wood Dowel Ø8 x 30 mm (E) x8
- Screw M 6.5 x 10.5 mm (J) x4
- Drawer Runner (RM30A) x1
Components Used:
- Side Board Left (3) x1
- Side Board Right (4) x1
Step 3
Assemble the main frame. Attach side boards (3 and 4) to the top board (1). Insert cam locks (C) into the side boards and secure them to the cam bolts (A) pre-inserted in the top board. The diagram shows side boards (3, 4) being attached to the top board (1) using cam locks (C). Arrows indicate insertion and turning of cam locks.
Hardware Used:
- Cam Lock Ø15 mm (C) x4
Components Used:
- Top Board (1) x1
- Side Board Left (3) x1
- Side Board Right (4) x1
Step 4
Attach the back board (11). Slide the back board (11) into the grooves on the back of the assembled frame. The diagram shows the back board (11) being slid down into the frame. One side of the back board is labeled "No Laminated", indicating the orientation.
Components Used:
- Back Board (11) x1
Step 5
Attach the bottom board (2) to the legs (5). Insert wood dowels (E) into the legs. Attach the bottom board (2) to the legs (5) using screws (F) and the Allen key (G). The diagram shows legs (5) being attached to the bottom board (2) with screws (F) and Allen key (G). A close-up shows the screw insertion.
Hardware Used:
- Screw M 7 x 50 mm (F) x4
- Allen Key (G) x1
Components Used:
- Bottom Board (2) x1
- Leg (5) x4
Step 6
Attach the assembled leg/bottom board structure to the main frame. Secure the bottom board (2) to the side boards using screws (F) and the Allen key (G). Attach floor protectors (I) to the bottom of the legs. The diagram shows the main frame being placed onto the bottom board (2) and legs (5). Screws (F) and Allen key (G) are used for attachment. Floor protectors (I) are shown being attached to the bottom of the legs.
Hardware Used:
- Screw M 7 x 50 mm (F) x4
- Floor Protector (I) x4
- Allen Key (G) x1
Components Used:
- Bottom Board (2) x1
Step 7
Attach the front drawer (6) to the main frame. Insert cam bolts (B) into the front drawer. Align the front drawer with the frame and secure using cam locks. The diagram shows cam bolts (B) being inserted into the front drawer (6). A visual shows the correct orientation of cam bolt (B) and the incorrect orientation.
Hardware Used:
- Cam Bolt Ø6 x 32 mm (B) x4
Components Used:
- Front Drawer (6) x1
Step 8
Assemble the drawer. Attach side drawer left (7) and side drawer right (8) to the front drawer (6) using cam locks (D). Attach the back drawer (9) and bottom drawer (10) to the drawer assembly using screws (H). The diagram shows side drawer left (7) and side drawer right (8) being attached to the front drawer (6) using cam locks (D). It also shows the back drawer (9) and bottom drawer (10) being attached to this assembly using screws (H).
Hardware Used:
- Cam Lock Ø12 mm (D) x4
- Screw M 8 x 39 mm (H) x4
Components Used:
- Front Drawer (6) x1
- Side Drawer Left (7) x1
- Side Drawer Right (8) x1
- Back Drawer (9) x1
- Bottom Drawer (10) x1
Step 9
Attach the drawer runners (RM30A) to the assembled drawer. Secure the drawer runners (RM30A) to the sides of the drawer assembly using screws (K). The diagram shows drawer runners (RM30A) being attached to the sides of the drawer assembly using screws (K). Labels (DR) and (DL) indicate right and left runners.
Hardware Used:
- Screw M 3.5 x 13 mm (K) x6
- Drawer Runner (RM30A) x1
Step 10
Insert the assembled drawer into the main unit. The diagram shows the completed drawer being slid into the side table frame, aligning with the previously attached runners.
Caring for Your Item
Side Table assembly is complete. ?
Indoor use only.
Not contract grade.
Clean using a non-abrasive cloth and a mild cleaner. Never use harsh chemicals, as they could damage the finish or integrity of the item. ?
Maximum weight capacity for the top surface: 20 Kgs. ⚖️
Maximum weight capacity for the drawer: 5 Kgs. ⚖️
