Vogel's PLA 8610 CURVED BAR COUPLER
Maximum Load: 34 kg / 75 lbs
Guarantee: 5️⃣ YEAR GUARANTEE
Certifications: TÜV NORD, TÜV Nederland QA Approved
Product Overview
The Vogel's PLA 8610 is a curved bar coupler designed for mounting AV equipment. It provides a secure and robust connection for various display setups, ensuring stability and proper alignment.
Assembly Instructions
Step 1: Coupler Assembly
Align the two main parts of the coupler. Secure them using screws with a torque of 12 Nm. Note the dimensions of +3 mm and 3 mm for precise fitting. This step may involve components like the PLA 8609 and PUC 29XX.
Step 2: Mounting to Bar
Align the assembled coupler onto the target bar. Ensure the alignment indicators (X = X) are correctly positioned. Secure the coupler to the bar using screws with a torque of 12 Nm.
Step 3: Final Connections
The diagram shows the final connection points and how the coupler is secured. This product is compatible with specific accessory models, including PLI 8606 H2, PLI 8607 H3, and PLI 8608 H4.
Important Information
Disclaimer: Subject to printing errors and technical amendments. All specifications and designs are subject to change without prior notice.
Designed and engineered in the Netherlands by VOGEL'S PRODUCTS BV, HONDSRUGLAAN 93, 5628 DB EINDHOVEN, THE NETHERLANDS.
For more information, visit: www.vogels.com
Vogel’s official website | Vogel's
