Vogel's RISE Series Mounting Instructions

Product Components

The following components are referenced in the instructions:

• A172: PFB BAR 1100mm
• A173: Extended Strip 800 VESA
• A174: Extended Accessory Interface 1000 VESA

Hardware: H4 screws are used in various steps.

Installation Steps

Step 1: Prepare the Mount Bracket

Action: Loosen two screws (L+R) on the main mounting bracket. Attach the bracket to the RISE Floor/wall & trolley system. Ensure a torque of 3 Nm.

Visual Description: Diagram 1 shows a bracket being prepared by loosening screws, then attached to a central bar with a torque indicator. The bracket is oriented to the BACK.

• Loosen 2x (L+R) screws.
• Apply 3 Nm torque ⚖️.
• Hardware: H4 screws.
• Orientation: BACK.

Step 2: Attach RISE Bar

Action: Attach the RISE bar (A172) to the prepared bracket. This step is shown in diagram 2.

Visual Description: Diagram 2 shows the RISE bar being connected to the bracket, with a torque specification. The RISE bar is oriented to the FRONT.

• Apply 3 Nm torque ⚖️.
• Hardware: H4 screws.
• Orientation: FRONT.

Step 3: Install Optional RISE A174

Action: For the RISE A174 accessory interface, attach it to the RISE bar. This involves positioning it at 90-degree angles and fixing it. This is shown in diagram 2 (second part) and diagram 3.

Visual Description: Diagram 2 (second part) shows the A174 being positioned. Diagram 3 shows the detailed attachment of the A174 to the RISE bar, requiring 90° positioning and using H4 screws with 3 Nm torque.

• Position the A174 at 90° angles.
• Fix the component.
• Apply 3 Nm torque ⚖️.
• Hardware: H4 screws.
• Orientation: BACK.

Step 4: Attach TV Mounting Plate

Action: Attach the TV mounting plate to the RISE bar. Diagram 4 illustrates this step, showing the center bar and fixing points.

Visual Description: Diagram 4 shows the top view of the RISE bar with a plate being attached. It specifies 'CENTER BAR' and 'FIX (2x)' points. The plate has 'TOP' and 'BOTTOM' indicators.

• Identify the CENTER BAR.
• Secure using 2x FIX points.
• Ensure correct TOP/BOTTOM orientation.

Step 5: Mount TV to Plate

Action: Attach the TV to the mounting plate. Diagram 5 shows a 'CLICK' mechanism ?️, indicating how the TV is secured.

Visual Description: Diagram 5 shows a TV being brought towards the mounted plate, with a visual cue for the click-in mechanism.

• Align the TV with the plate.
• Engage the 'CLICK' mechanism ?️.

Step 6: Final Check

Action: Ensure the TV is securely attached. Diagram 6 shows the final state.

Visual Description: Diagram 6 shows the TV fully mounted on the bracket.

• Verify secure attachment.

Important Notes

Usage Restrictions

Note: Use RISE A173 ONLY with VERTICAL VESA 800.

Technical Amendments Disclaimer

The following statements address potential printing errors and technical amendments:

• (GB) Subject to printing errors and technical amendments.
• (NL) Drukfouten en technische wijzigingen voorbehouden.
• (F) Sous réserve de fautes d'impression et de modifications techniques.
• (D) Für Druckfehler übernehmen wir keine Verantwortung. Technische Änderungen vorbehalten.
• (E) Reservados errores de imprenta y sujete a modificationes.
• (I) Con riserva di modifiche techniche e di eventueli errori di stampa.
• (P) Reserva-se a ocorrência de gralhas e de modificações técnicas.
• (H) Nyomdahibák és technikai változtatások joga fenntartva.
• (PL) Zastrzega się możliwość występowania błędów drukarskich i zmian technicznych.
• (RUS) Возможны ошибки при печати и технические модификации.