Vogel's WALL 3325 & WALL 3345 TV Wall Mounts

Important Safety Information

Please read all warnings and instructions carefully before starting installation. Incorrect mounting or installation can lead to serious risk of injury or damage to your screen or other objects. Vogel's recommends that installation be performed by a qualified expert. Ensure your TV's weight and dimensions are within the specified limits for this mount. Wall mounting accessories provided are for solid brick, concrete, or wood stud walls only. Wall coverings should not exceed 3 mm (0.12 inches). Consult a specialist for other wall types.

Parts Included

The following parts are typically included:

• Mounting brackets/strips (A, C)
• Support bars (B)
• Caps (R)
• Screws and bolts (G, H, J, M, N, P)
• Clip (X)
• Optional parts (H, J)

Required tools often include a screwdriver ?, drill ड्रिल, and spirit level ?.

Installation Steps

Step 1: Position the strips (C) on the screen

Place the strips (C) onto the back of your screen. Ensure that the strips do not cover any screen connectors.

Step 2: Screw the strips (C) onto the screen

Attach the strips (C) to the screen using appropriate screws. Refer to your TV's user manual for the correct mounting material and screw size.

Step 3.1: Loosen the bolts on the strips (C)

Loosen the bolts that secure the strips (C).

Step 3.2: Remove the caps (R)

Remove the caps (R) from the strips (C).

Step 3.3: Slide the bars (B) over the strips (C)

Slide the bars (B) over the strips (C). Make sure the bars do not cover the screen connectors.

Step 4.1: Tighten the bolts

Tighten all bolts securely.

Step 4.2: Place the caps (R) back onto the bars (B)

Reattach the caps (R) onto the ends of the bars (B).

Step 5: Slide the covers (Q) from the wall mount (A)

Slide the covers (Q) off the wall mount (A).

Step 6: Drill the holes

Drill holes in the wall according to the specified dimensions and drill bit sizes (e.g., 5mm for 20mm depth, 10mm for 80mm depth). Ensure correct placement and depth. ⚠️

Step 7: Screw the wall mount (A) onto the wall

Attach the wall mount (A) to the wall using appropriate screws. Use grease or vaseline ? to lubricate screws for smoother movement. Ensure the mount is level. ?

Step 8: Slide the covers (Q) back onto the wall mount (A)

Slide the covers (Q) back onto the wall mount (A).

Step 9: Loosen the upper thumbscrew; remove the lower thumbscrew

Loosen the upper thumbscrew and remove the lower thumbscrew.

Step 10.1: Hook the TV onto the wall mount (A)

Hook the TV onto the wall mount (A). Secure the upper thumb screw into the V-shaped recess.

Step 10.2: Position the TV level

Adjust the TV to ensure it is level. ?

Step 10.3: Place the lower thumbscrew back; tighten both thumbscrews

Re-insert the lower thumbscrew and tighten both thumbscrews to secure the TV.

Step (Optional): Guide the cables

Route cables neatly along the mount.

Troubleshooting Tilt

If the tilt option is not used and the screen tilts downwards/upwards, tighten or loosen screw S as needed.

Step (Optional): Remove the TV from the wall mount (A)

To remove the TV, loosen the upper thumbscrew, remove the lower thumbscrew, and then detach the TV from the mount.

Guarantee Information

Vogel's offers a lifelong guarantee against defects in materials or manufacturing. To claim the guarantee, the product must be sent to Vogel's with the original proof of purchase. The guarantee is void if the product is not installed or used according to instructions, has been altered by unauthorized parties, or if faults arise from external causes or misuse.