User Manual (NV103KH)

Thank You for Purchasing Our Product

Note: Please contact us if you encounter any problems with the installation, missing, or replacement parts. Provide your "ORDER ID" so we can resolve the issue promptly.

Please scan the QR code to refer to the installation video.

Online video: https://buylikepro.com/pages/round-coffee-table-support

Customer Service: help@EverythingSupport.com

TEL: (855) 208-0668 (MON-FRI 9:00am-6:00pm Eastern Time)

Installation Instructions

Note: Avoid fully tightening screws during initial assembly to prevent errors. Tighten screws only after all parts have been properly assembled. Please read this manual carefully before installation and keep it for future reference.

General Assembly Notes:

• Ensure that all parts and hardware are available before beginning assembly.
• Follow each step carefully to ensure the proper assembly of this product.
• Please avoid harsh, corrosive, and abrasive cleaners.
• Keep the edge of the table dry to avoid product damage.

List of Installation Accessories

Parts Overview:

Part 1: Tabletop (1 PC)

Part 2: Lower Shelf (1 PC)

Part 3: Support Ring (1 PC)

Part 4: Legs (6 PCS)

Hardware:

Assembly Steps

STEP 1

Attach the legs (Part 4) to the tabletop (Part 1) using screws (Part A). Ensure the countersunk holes are facing upwards. Use 12 screws (A).

Tighten screws only after all parts have been properly assembled.

STEP 2

Attach the support ring (Part 3) to the legs using screws (Part C) and screws (Part E). Use 6 screws (C) and 1 screw (E).

STEP 3

Attach the lower shelf (Part 2) to the legs using screws (Part B) and foot pads (Part D). Use 4 screws (B) and 4 foot pads (D). The tightness of Part D can be used to adjust the table level. Ensure the countersunk holes are facing upwards.

STEP 4

The assembly is now complete. The final product is a round coffee table.

Please avoid harsh, corrosive, and abrasive cleaners. Keep the edge of the table dry to avoid product damage.