MINISO Wireless Earbud X33 Product Manual

Welcome to MINISO Wireless Earphones

Catalogue

01 How to wear headphones correctly

02 Product Introduction

03 Touch Operation

04 Item list

05 Warranty Statement

How to wear headphones correctly

Take out and pair it:

When using for the first time, take out the left and right earphones at the same time. When the white light and red light of the earphones flash alternately, the earphones will enter the automatic pairing mode.

[Illustration: Wireless earphones in an open charging case.]

[Illustration: Hand inserting an earbud into the ear, showing correct placement for left and right ears.]

Product Description

[Illustration: Single earbud with labels pointing to: Multi function key touch position, Bluetooth LED Display light, Charging Contacts.]

Specification of Product

[Illustration: Charging case showing digital display screen and Type-c Interface.]

Model of Product:X33
Version:V5.4
Effective Distance:Approx. 10m
Speaker Diameter:Φ12mm
Impedance:16Ω
Frequency Response:20Hz-20KHz
Microphone Sensitivity:-42dB±3dB
Earphone Input:5V=35mA
Charging Case Input:5V=300mA
Charging Case Output:5V=70mA
Earphone Battery Capacity:35mAh
Charging Case Battery Capacity:300mAh
Duration:Approx. 4 H (Earphone)
Earphone Charging Time:Approx. 1 H
Charging Time of the Charging Case:Approx. 1.5 H

Touch Operation

Connect with Bluetooth device

[Illustration: Smartphone screen showing Bluetooth settings with "MINISO-X33" connected.]

Open the Bluetooth settings option of the Bluetooth device to be paired, enter the options and find the Bluetooth pairing name of the headset "MINISO-X33". Click the pairing name to pair.

Indicator Light Description

  • When the headset is turned on: the white light and the red light flash alternately.
  • When the headset is turned off: After the red light is on, it goes out.
  • Pairing status: white light and red light flash alternately.
  • Connection successful: no light.
  • Headphone Charging: The digital display screen of the charging case is constantly on, and the red light on the earphones is always on. After being fully charged, the red light on the earphones goes out, and at the same time, the digital display screen in the earphone compartment goes out.
  • The digital display screen of the charging case flashes, and after being fully charged, the digital display screen of the headphone case always lights up at 100.

Once Press

Power On:

  • Auto power on: The Earphone are taken out of the charging case, the Earphone will be powered on, with the prompt sound of "Du".
  • Manual power-on: Long press for 3 seconds, the Earphone will be powered on, with the prompt sound of "Du".

Power Off:

  • Auto power off: Put the Earphone in the charging case, the Earphone will be powered off, with the prompt sound of "Du".
  • Manual power off: Long press for 5 seconds, the Earphone will be powered off, with the prompt sound of "Du".

Note: After turning on the device, if it is not paired and connected to the Bluetooth device for 3 minutes, it will automatically shut down; Exceeded the effective connection distance and did not connect to the Bluetooth device. After 3 minutes, it will automatically shut down with a beep sound.

[Illustration: Single earbud with "X1" icon.]

Music mode: ▶️ Play/Pause

Phone mode: ? Call Answer/End

Double Press

[Illustration: Single earbud with "X2" icon.]

Music mode:

  • Double press the right ear: Volume up
  • Double press the left ear: Volume decreases

Long Press

[Illustration: Single earbud with "X2" icon.]

Wake up voice assistant: When using both ears, press and hold the left ear multi-function button for 2 seconds to activate the voice assistant. When using one earphone, press and hold the left (or right) earphone for 2 seconds to activate the voice assistant.

Phone mode: Press and hold the left (or right) ear multi-function button for two seconds: ? Call rejection.

Triple Press

[Illustration: Single earbud with "X3" icon.]

Music mode:

  • Triple press on the left ear: Previous song
  • Triple press on the right ear: Next song

Clear Bluetooth pairing history

When both ears cannot be paired, you need to clear all connected devices and click the left and right earphones 5 times at the same time.

[Illustration: Hands holding left and right earphones, indicating a 5-time press action.]

Wireless pairing mode

  1. When there is no pairing record for the left and right earphones, the left and right earphones will automatically pair after they are turned on. After successful pairing, there will be two beeps.
  2. When the left and right earphones have pairing records, they will automatically connect back when they are turned on, and the prompt will sound "beep".

Switch between game mode and music mode (Binaural operation)

[Illustration: Wireless earphones in a charging case.]

Game mode: Press and hold the multi-function button on the right ear for 2 seconds.

Music mode: Press and hold again for 2 seconds.

Note 1: When using one earphone, you cannot switch between game mode and music mode.

Note 2: The factory setting defaults to music mode.

Item list

[Illustration: A pair of wireless earphones.] Headphones *1

[Illustration: A charging case.] Charging case *1

Instructions and Accessories

[Illustration: A charging cable.] Charging cable *1

Instruction *1

FCC Information

FCC ID: 2BHJR-X33

FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

US REP:

Company name: REP America LLC

Address: 1942 Broadway St. STE 314C, Boulder, CO 80302, United States

Contact Person: Ben Xu

Email: d.zeng@rep-europe.de

Contact Phone: (719) 201-3314

Warranty Statement

MINISO product warranty card

Product numberSN numberPurchase date
User infoname
telephone
address
Invoice number
Sales unit informationname(stamp)
address
telephone

The above guarantee does not apply to the following situations:

  1. The validity period of the three guarantees has exceeded;
  2. Altering of the warranty cards and product code do not match the product itself;
  3. Failure of damages caused by misuse, abuse or improper transportation, use, maintenance or storage;
  4. Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
  5. Zippers and tower buckles are damaged due to excessive force;
  6. Off-line or tear caused by overloading;
  7. Any damage caused by sharp objects;
  8. Products with signs of burn damage or water logging;
  9. Damage caused by unauthorized dismantling and modification;
  10. Aging, discoloration, wear, cracking and other losses that occur during normal use of the product.
  11. If the product's original logo or label is changed or damaged, this warranty will be invalid.

The completeness and appearance of the product and accompanying materials are not covered by the warranty. You should inspect the product on site when receiving it and raise objections to any discrepancies.

MINISO Product service policy:

If you encounter a problem, please contact our customer service to solve it. After-sales email: 7@hifi-earphone.com

[FCC logo] [ROHS logo] [CE logo]

Warranty Policy

Disclaimer: This manual does not come with any form of warranty, position expression or other implication. The products, specifications and information mentioned in this manual are for reference only, and the content will be updated on the website at any time without prior notice.

Warranty statement: The following guarantee is made for the products attached to this document: If the product is damaged due to quality defects under normal use within twelve (12) months from the date of your purchase (the “Warranty Period”), and if it can be repaired, it will be repaired free of charge; If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge; the repaired product will continue to be covered by the warranty for the remaining warranty period (a minimum of not less than 30 days). The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen (13) months from the product production date.

If you want to apply for warranty, please call the product service hotline first and follow our instructions. When applying for a warranty, you are required to provide a valid sales invoice that is accurate, complete and clearly filled out.

Guidelines for safe and effective use

Note: Please read this information first before using your Bluetooth headset. If the user makes modifications or modifications to this Bluetooth headset without permission, the user will lose the right to continue to enjoy the services included in the device.

Electromagnetic interference:

Safety matters:

Important safety tips

Models: 2BHJR-X33, 2BHJRX33, X33, X33 Wireless Earbud, X33, Earbud, X33 Earbud, Wireless Earbud

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7525237 Adobe PDF library 15.00 Adobe Illustrator 25.0 (Windows)

Related Documents

Preview MINISO Wireless Earbud X60 User Manual and Specifications
Comprehensive user manual for MINISO Wireless Earbud X60, covering product description, specifications, touch operations, safety guidelines, and warranty information. Includes details on Bluetooth connectivity, button functions, and important safety tips.
Preview MINISO Wireless Earbud X33 RF Exposure Evaluation
RF exposure evaluation report for the MINISO Wireless Earbud X33, detailing technical specifications, operating parameters, and SAR test exclusion thresholds according to FCC guidelines.
Preview MINISO Wireless Earbud M99 Product Manual
User manual for MINISO Wireless Earbud M99, detailing product features, specifications, operation instructions, touch controls, pairing, safety guidelines, and warranty information.
Preview MINISO X15PRO Wireless Earbud Product Manual
This manual provides instructions for the MINISO X15PRO Wireless Earbuds, covering setup, usage, touch operations, specifications, and safety guidelines.
Preview MINISO-M06 Bluetooth Earphones User Manual
Comprehensive user manual for MINISO-M06 Bluetooth earphones, covering setup, operation, safety precautions, troubleshooting, and technical specifications. Learn how to pair, control playback, and use voice assistants.
Preview MINISO Wireless Earbud MS168 Product Manual
Comprehensive product manual for the MINISO Wireless Earbud MS168, covering setup, operation, specifications, safety guidelines, and warranty information.
Preview MINISO Wireless Earbud X29 Product Manual and User Guide
Comprehensive product manual for the MINISO Wireless Earbud X29, covering setup, operation, features, specifications, and warranty information.
Preview MINISO Wireless Earbud M96: User Manual and Product Guide
Official product manual for MINISO Wireless Earbud M96. Find detailed instructions on setup, pairing, touch controls, specifications, safety, and warranty information.