MINISO Wireless Earbud X15PRO Product Manual

Table of Contents

• 01 How to wear headphones correctly
• 02 Product Introduction
• 03 Touch Operation
• 04 Item list
• 05 Name and content of hazardous substances in products
• 06 Warranty Statement

01 How to wear headphones correctly

Take out the left and right earphones from the charging case. When the white light and ice blue light of the earphones flash alternately, they will enter automatic pairing mode.

Right Ear: Place the earbud into the ear canal and adjust the ear hook to fit securely over the ear.

Left Ear: Place the earbud into the ear canal and adjust the ear hook to fit securely over the ear.

02 Product Introduction

The MINISO Open Wearable Stereo earbuds are designed for comfortable and secure wear. They feature a multi-function touch key, Bluetooth LED display light, and charging contacts.

Key Features:

• Multi-function key touch position
• Bluetooth LED Display light
• Charging Contacts

Specification of Product

• Model of Product: X15PRO
• Version: V5.4
• Effective Distance: Approx. 10m
• Speaker Diameter: ⌀14.2mm
• Impedance: 16Ω
• Frequency Response: 20Hz-20KHz
• Microphone Sensitivity: -42dB±3dB
• Earphone Input: 5V=40mA
• Charging Case Input: 5V=300mA
• Charging Case Output: 5V=80mA
• Earphone Battery Capacity: 40mAh
• Charging Case Battery Capacity: 300mAh
• Duration: Approx. 4.5 H (Earphone)
• Earphone Charging Time: Approx. 1 H
• Charging Time of the Charging Case: Approx. 1 H

Charging Indicator: Indicates charging status.

Type-c Interface: For charging the case.

03 Touch Operation

Connect with Bluetooth device

Open the Bluetooth settings on your device. Find and select "MINISO-X15PRO" to pair.

Indicator Light Description

• Headset On: White and ice blue lights flash alternately.
• Headset Off: White light flashes 3 times quickly and then goes out.
• Pairing Status: White and ice blue lights flash alternately.
• Connection Successful: No light.
• Headphone Charging: Charging case indicator light is always white, headset white light is always on. Fully charged headset turns ice blue, then goes out. Charging case indicator light also goes out.
• Charging the Charging Case: Ice blue light flashes. Fully charged case has a solid light.

Once Press

• Music Mode: Play/Pause
• Phone Mode: Call Answer/End

Double Press

• Music Mode:
• Double press right ear: Volume up
• Double press left ear: Volume decreases

Long Press

• Wake up voice assistant: Press and hold the multi-function button for 2 seconds (on either earbud).
• Phone Mode: Press and hold the multi-function button for 2 seconds (on either earbud) for call rejection.

Triple Press

• Music Mode:
• Triple press left ear: Previous song
• Triple press right ear: Next song

Note: When using one earbud, triple-clicking will play the next song.

Clear Bluetooth pairing history

If pairing fails, clear all connected devices by clicking the left and right earphones 5 times simultaneously.

Wireless pairing mode

1. When no pairing record exists, earbuds auto-pair upon turning on. Two beeps indicate successful pairing.
2. If pairing records exist, earbuds auto-connect upon turning on, indicated by a "beep" sound.

Switch between game mode and music mode (Mono/Binaural operation)

• Game Mode: Press and hold the multi-function button on the right ear for 2 seconds.
• Music Mode: Press and hold again for 2 seconds.

Note 1: Cannot switch modes when using only one earphone.

Note 2: Factory setting defaults to music mode.

04 Item list

• Headphones *1
• Charging case *1
• Instruction *1
• Charging cable *1
• Lanyard *1

05 Name and content of hazardous substances in products

This form is compiled in accordance with SJ/T 11364.

◯: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit required by GB/T 26572.

X: Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.

The parts marked with "X" on the form are all harmful due to the limitations of global technological development. Substitution of substances.

Printed circuit board components: Including printed circuit boards and their parts, electronic components, etc. Depending on the product model, the earbuds you purchased may not contain all the above components.

Electronic and electrical products sold in the People's Republic of China must mark this LOGO. The number in the logo represents the product's normal use environmental protection use period.

Logos: FC, RoHS, CE, 10 (with circular arrow), UKCA

06 Warranty Statement

MINISO product warranty card

Warranty statement

The following guarantee is made for the products attached to this document:

If the product is damaged due to quality defects under normal use within twelve (12) months from the date of your purchase (the "Warranty Period"), and if it can be repaired, it will be repaired free of charge; If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge. The repaired product will continue to be covered by the warranty for the remaining warranty period (a minimum of not less than 30 days). The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen (13) months from the product production date.

If you want to apply for warranty, please call the product service hotline first and follow our instructions. When applying for a warranty, you are required to provide a valid sales invoice that is accurate, complete, and clearly filled out.

Guidelines for safe and effective use

Note: Please read this information first before using your Bluetooth headset. If the user makes modifications or modifications to this Bluetooth headset without permission, the user will lose the right to continue to enjoy the services included in the device.

• Electromagnetic interference: Electronic devices: To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device in accordance with regulations in places with clear instructions.
• Civil Aviation: After boarding the plane, please turn off your Bluetooth headset according to the flight attendant's instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft communication system.

Safety matters:

• Placement: It is recommended that when you are not using the Bluetooth headset, place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury.
• Children: Do not let children play with Bluetooth headsets. Some of the small parts are detachable and may be swallowed and cause danger.

Important safety tips

• Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
• This product contains a built-in rechargeable battery. It is prohibited to hit, squeeze, puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, please stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as the sun, heaters, or stoves. After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight, or other high-temperature and high-pressure environment to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one. However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type.
• After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
• During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
• When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause the battery to be damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.

FCC Information

FCC ID: 2A83K-X15PRO

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

US REP

Company name: UUX GROUP INC

Address: 36 South 18th Avenue, Suite A Brighton, CO USA 80601

Contact Person: Jack Fu

Email: uuxforever@outlook.com

Contact Phone: (213) 375-3998

MINISO Product service policy

If you encounter a problem, please contact customer service.

After-sales email: 7@hifi-earphone.com

The above guarantee does not apply to the following situations:

1. The validity period of the three guarantees has exceeded;
2. Altering of the warranty cards and product code do not match the product itself;
3. Failure of damages caused by misuse, abuse or improper transportation, use, maintenance or storage;
4. Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
5. Zippers and tower buckles are damaged due to excessive force;
6. Off-line or tear caused by overloading;
7. Any damage caused by sharp objects;
8. Products with signs of burn damage or water logging;
9. Damage caused by unauthorized dismantling and modification;
10. Aging, discoloration, wear, cracking and other losses that occur during normal use of the product.
11. If the product's original logo or label is changed or damaged, this warranty will be invalid.

The completeness and appearance of the product and accompanying materials are not covered by the warranty. You should inspect the product on site when receiving it and raise objections to any discrepancies.

Service supervision hotline: 400-812-0102

Warranty Policy

Disclaimer: This manual does not come with any form of warranty, position expression or other implication. The products, specifications and information mentioned in this manual are for reference only, and the content will be updated on the website at any time without prior notice.