GOTRAX XR ELITE MAX ELECTRIC SCOOTER

Congratulations on your purchase!

This user manual will help you assemble and operate your new electric scooter. Be sure to read ALL OF THE INFORMATION in this manual before riding.

NOTE TO ALL RIDERS UNDER 18 YEARS OF AGE: It's very important that you get parental permission before riding your electric scooter.

Don't Ride Until You Read This

• ⛑️ Always wear a helmet when riding your electric scooter.
• ? Make sure your scooter has a full battery before taking it out to ride.
• ? Always be aware of local road laws, and follow them.
• ? Do not ride the scooter under the influence of drugs or alcohol.
• ? Always respect pedestrians.
• ?️ Do not ride under wet conditions. The scooter may slide from under your feet causing injury. Wet conditions may damage the electronics and void the warranty.

Warning Message

1. Avoid water: The scooter is not waterproof. Electronics may be damaged due to water, and water damage is not covered by warranty. Riding in wet conditions is dangerous and may result in injury.
2. Abuse: Physical damage due to negligent care and extreme riding is not covered.
3. Risk of Injury: Riding the GOTRAX electric scooter carries a risk of severe injury or death from loss of control, collisions, and falls. Use caution and ride at your own risk.
4. Modification: Do not modify the product from the manufacturer's original design.
5. Moving Parts: Keep hands and all body parts away from moving parts while operating the scooter.
6. Pre-Ride Check: Before riding, ensure the scooter is operating correctly.
7. Braking System Check: Before riding, ensure the braking system is functioning properly and all safety labels are in place and understood.
8. Guards and Covers: Before riding, ensure all axle guards, chain guards, or other covers/guards supplied by the manufacturer are in place and in serviceable condition.
9. Tire Condition: Before riding, check that tires are in good condition, properly inflated, and have sufficient tread remaining.
10. Load Rating: Never exceed the 264lbs (120kg) maximum load rating.
11. Age Restriction: The electric scooter should never be used by children under the age of 13.
12. Maximum Speed: Your electric scooter goes the maximum speed of 15.5mph.

Unpack

You should find each of these items in your box:

• 1. Electric Scooter
• 2. Console & Handlebars
• 3. Approved Power Adapter / Charging Unit
• 4. 4mm Allen Wrench
• 5. Tire Gauge Pipe
• 6. Screws (x6)

Diagram Description:

The diagram shows the electric scooter (labeled 1), the console and handlebars (labeled 2), the power adapter/charging unit (labeled 3), a 4mm Allen wrench (labeled 4), a tire gauge pipe (labeled 5), and a group of six screws (labeled 6).

Remove all packaging material, then inspect each item for any accidental damage that may have occurred during shipping.

Get To Know Your Scooter

Diagram Description:

A diagram illustrates the electric scooter with various parts labeled: Accelerator, Console, Bell, Handle bar, Handle Brake, Headlight, Hook, Tiller, Folding mechanism, Pedal, Rear light/Brake light, Safety latch, Fender buckle, Motor, Built-in battery, Kickstand, Charger port. The text indicates the electric scooter comes partially assembled.

Specifications

Assemble Your Scooter

Tool requirements: 4mm Allen wrench (In the package)

Step 1: Preparation

Take out the scooter, console, and assembly tools (wrench and screws) from the box. Check the parts list to confirm that the parts are not damaged or lost during transportation.

Step 2: Unfold Tiller

Press down on the rear fender, separate the folding hook and fender buckle, then lift the tiller upright (as shown in the figure). Once the scooter is locked in the upright position, verify by gently trying to fold.

Step 3: Attach Handbrake

Pull the handbrake towards you and insert the round metal piece into the opening. String the small silver cord through the solid piece of the handbrake. Make sure the metal piece on the brake cord is pushed fully into the handbrake.

Step 4: Connect Console

Connect the power cord between the tiller and the console, then insert the console above the tiller until the screw holes on the tiller and console are aligned. Install the screws on the screw holes of the tiller and tighten with a wrench.

Charge Your Scooter

Before using the scooter, you must fully charge the battery.

• 1. Open the rubber charging port cover.
• 2. Insert the charging plug into the port.
• 3. The charger box will have a green light when fully charged and a red light when charging.
• 4. When you are done charging, be sure to cover the charging port to keep it clear of dust and debris.
• 5. Charging Time: about 5 hours.

Charging Requirement: Make sure to charge your scooter in conditions that do not exceed 104 degrees Fahrenheit or below 32 degrees Fahrenheit. Use only the original charger.

Scooter Console Functions

• To power the scooter on, press and hold the button for 3 seconds.
• To power the scooter off, press and hold the red button for 3 seconds.
• To power the headlight on or off, when the scooter is powered on, double-click the red button of the meter to turn on the headlight and taillight, and double-click the red button again to turn off the headlight and taillight.
• To switch the gear, the scooter starts in default gear 1, and the top speed is 9.5MPH. Press the red button once to switch into gear 2, and the top speed is 15.5MPH.
• The console on the scooter displays speed, mileage, battery life, headlight & taillight status, and the current gear.
• To switch the speed unit, the default speed unit displayed by the console is MPH. If you want to switch the speed unit to KM/H, please press the red power button three times quickly in the power-on state to switch the speed unit to KM/H. If you want to switch the speed unit to MPH again, quickly press the power button 3 times again to complete the switch.

Diagram Description:

A diagram shows the scooter console display with digital readouts for speed (e.g., 88), gear (e.g., 1 or 2), battery indicator, and icons for headlight/taillight and a warning symbol. Buttons labeled F1, F2, and a power button are also depicted.

Riding Tips

• 1. Start riding your electric scooter with one foot on the platform and one foot on the ground. Use your foot on the ground to push off and, at the same time, press the throttle button to begin movement.
• 2. Press the handbrake to slow down or stop.
• 3. The scooters perform best on a smooth surface, e.g., carparks, smooth roads, footpaths, & bike lanes.
• 4. Always clean your scooter (wheels, platform, etc.); it's a machine and needs to be maintained.
• 5. Do not press the throttle while walking with the scooter beside you.
• 6. Be aware of the terrain you are riding on; watch out for curbs and obstacles!
• 7. Cruise Control: To activate cruise control, press the right-hand throttle down for 8 seconds. To deactivate cruise control, press either the right-hand throttle or brake button.
• 8. Brake Light Status: The taillight is also the brake light. When you turn on the headlight, the brake light will be steady on. When you hold the handbrake, the taillight will quickly flash, reminding vehicles and pedestrians behind.

Putting Your Scooter Away/Folding

Before folding the scooter, make sure that the scooter is powered off.

Folding:

Ensure the electric scooter is powered off, hold the tiller and pull out the spring pin on the right folding panel, then rotate the spring pin clockwise. Insert the hook on the tiller into the loop on the pin clockwise. Insert the hook on the tiller into the loop on the rear fender buckle. You may hear a click, which indicates that you were successful in folding and locking the scooter.

Unfolding:

Press the rear fender and pull the tiller up to unfold the electric scooter; the spring pin will insert itself in place within the folding lever to lock the folding mechanism.

Diagram Description:

Diagram 1 shows the scooter in its upright, unfolded state. Diagram 2 shows the scooter folded, with the tiller lowered and secured.

Maintenance & Repair

If you regularly clean and maintain your electric scooter, it will extend its life.

Cleaning and Storage:

If the scooter is dirty, wipe it clean with a soft damp cloth.

Brake Adjustments & Service:

If you notice you need brake adjustments or any service on your scooter, contact GOTRAX customer service. Do not repair your scooter yourself, as this can void your warranty and risk damaging the scooter.

Tires:

If you notice that the tire pressure is low, please fill to the recommended PSI on the side of the tire. Recommended PSI: 50

DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean the scooter. It can severely damage the appearance and structure of the scooter. Please do not use a pressure washer, as it may also cause damage to the electronics.

Storage:

When you're not using your scooter, store it in a dry and cool location. Avoid storing your scooter outdoors because sun exposure can damage its appearance and may cause wear on the life of the battery and tires.

Tightening the Tiller:

If you notice that the tiller is loose or wiggles while riding, you can tighten the screws. Open the plastic cover and use the Allen wrench to tighten the screws.

Adjusting the Disc Brake:

If the disc brake is too tight, use the 4MM Allen wrench to loosen the screws counterclockwise. Pull the brake wire to extend the brake wire and retighten the screws. If the disc is too loose, loosen the screws and pull the brake wire to extend the brake wire and retighten the screws.

Battery Information

Only use the approved GOTRAX power adapter to charge your scooter; others may cause risk of fire & equipment may be damaged.

Improper disposal of used batteries may seriously pollute the environment. Please comply with local disposal regulations.

Make sure to store your scooter and power adapter in conditions that do not exceed 122 degrees Fahrenheit or below -4 degrees Fahrenheit.

Warning - Risk of Fire: No User Serviceable Parts. Prolonged exposure to UV Rays, Rain, and the Elements may damage the enclosed materials; store indoors when not in use.

Troubleshooting

GOTRAX frequently updates user manuals online at www.GOTRAX.com. GOTRAX reserves the rights to update and change manuals online.

Please contact GOTRAX customer service team if you are experiencing problems or need more detailed information. They can be reached at www.GOTRAX.com.

Warranty

For warranty information, contact GOTRAX by mail: www.GOTRAX.com.

Connect with GOTRAX

Visit us online: www.GOTRAX.com

Follow us: #RideGOTRAX

? ? ? ▶️

Manufacturer Information

GOLABS, INC.

GOTRAX.com
2201 Luna Rd.
Carrollton, TX 75006