Soundcore mini 2 User Manual
Brand: Soundcore by Anker
Introduction
This document provides comprehensive instructions for the Soundcore mini 2 portable Bluetooth speaker. It covers safety precautions, package contents, operation, charging, technical specifications, and compliance information.
Important Safety Information
- ⚠️ Avoid dropping the product.
- ❌ Do not disassemble the product.
- ? Do not submerge the product in water.
- This product is exclusively for indoor use.
- Do not expose the product to dripping or splashing water.
- Do not install near any heat sources.
- Do not place any sources of danger on this device (e.g., liquid-filled objects, lit candles).
- Use the original power adapter only.
- Clean with a dry, soft, lint-free cloth. Do not use corrosive cleaners or oil.
- To avoid hearing damage, do not listen at high volume for extended periods.
Package Contents
- Soundcore mini 2 Speaker
- USB Charging Cable
- User Manual
Quick Overview
The Soundcore mini 2 features the following components:
- ? 1. Battery Indicator
- ? 2. Power Switch
- ➕➖ 3. Volume Buttons
- ▶️ 4. Multifunction Button
- 5. Bluetooth Pairing Button
- 6. Status Indicator
- ? 7. Microphone
- 8. Micro-USB Charging Port
- 9. 3.5mm AUX Input Jack
Operation
1. Power On / Off
Press and hold the power button to turn the device on or off. A short press (x1) typically indicates 'On', while a longer press (around 2 seconds) indicates 'Off'.
a. Bluetooth Mode
Pairing Mode:
- Turn on the speaker.
- Press the Bluetooth button (5) to enter pairing mode. The status indicator (6) will flash blue.
- On your device (e.g., smartphone, tablet), go to Bluetooth settings and select "Soundcore mini 2" from the list of available devices.
Connected:
- Once connected, the status indicator (6) will turn solid blue.
Troubleshooting Connection Issues:
- Remove "Soundcore mini 2" from your device's Bluetooth history.
- Ensure the speaker and your device are within 90 cm (3 feet) of each other.
- Repeat the pairing process.
- For optimal sound quality, ensure a clear line of sight between the speaker and your paired device.
True Wireless Stereo (TWS) Mode
With TWS technology, you can connect two Soundcore mini 2 speakers together for enhanced stereo sound.
- Turn on both speakers.
- On one speaker, press and hold the Bluetooth button (5) for approximately 3 seconds until the indicator flashes white.
- The second speaker will automatically connect. The indicator on both speakers will turn solid white when TWS is successfully connected.
- To exit TWS mode, press and hold the Bluetooth button (5) on either speaker for approximately 3 seconds.
b. AUX-In Mode
Connect an audio cable (SoundLine AUX cable sold separately) to the 3.5mm AUX input jack (9).
- When an audio cable is connected, the speaker will automatically switch to AUX mode.
- Audio playback and control are managed by the connected device.
Charging
Use the included USB cable to charge the Soundcore mini 2. Ensure it is fully charged before first use.
Charging Indicators:
- Flashing red ?: Low battery level.
- Solid red ?: Charging.
- No light: Battery fully charged.
- Disconnect the speaker from the charger once fully charged. Avoid prolonged charging periods.
- If the device is not in use, store it in a cool place.
Technical Specifications
Specifications are subject to change without notice.
| Specification | Details |
|---|---|
| Input | 5V ⎓ 1A |
| Sound Output | 6W |
| Battery Capacity | 1850 mAh |
| Charging Time | 2-3 hours |
| Playback Time | Up to 15 hours (varies with volume and content) |
| Dimensions | 69.5 x 69.5 x 80 mm / 2.7 x 2.7 x 3.1 inches |
| Weight (without packaging) | 207g / 7.3 oz |
| Bluetooth Version | V4.2 + EDR |
| Operating Range | 20 m / 66 ft |
Compliance and Legal Information
Declaration of Conformity:
Anker Innovations Limited declares that the radio equipment type A3107 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: anker.com/support.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Notice to Canadian Users:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Trademark:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Technology Co., Limited. is under license.
Recycling Information:
♻️ This symbol indicates that the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Follow local rules and do not dispose of the product and rechargeable batteries with normal household waste. Correct disposal helps prevent negative consequences for the environment and human health.
Additional Legal Rights for Consumers:
For consumers covered by consumer protection laws, the benefits conferred by the limited warranty are in addition to statutory rights and remedies.
Customer Service and Warranty
Warranty: 18-month limited warranty.
Technical Support: Lifetime technical support.
Contact:
- Email: support@anker.com
- Phone:
- +1 (800) 988 7973 (US)
- +44 (0) 1604 936200 (UK)
- +49 (0) 69 9579 7960 (DE)
- +81 03 4455 7823 (Japan)
- +86 400 0550036 (China)
- Website for FAQs and more information: anker.com/support
