Xiaomi Smart Projector L1 User Manual

Safety Instructions

Read this manual carefully before use, and retain it for future reference.

Warning Symbols:

• ⚠️ This warning symbol informs the user that this product contains non-insulated voltage sources that can cause an electric shock. Coming into contact with any internal component may result in an electric shock.
• ℹ️ This symbol informs the user about important handling and maintenance related information. Please read this information carefully to ensure proper use.
• ?️ This symbol informs the user to be aware of high temperatures.
• ✋ This symbol informs the user to avoid touching this part.
• ? Transportation Instructions: It is recommended to transport this projector in its original or similar packaging.

Preventing Electric Shocks and Fire Hazards:

• Only use the provided genuine power adapter.
• Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time, so as to avoid damage caused by a power surge or lightning strike.
• Do not place any flammable objects near this projector so as to avoid fire.
• Do not block any of the vents as this may cause heat build-up inside the projector, and possibly result in a fire.
• Do not block the lens when the projector is turned on. Any object placed close to the lens may get very hot and/or deformed, and may even cause a fire.

Safety Precautions:

• Do not place this projector on an unstable platform, stand or table so as to prevent it from falling and causing serious damage or personal injury.
• Do not look directly into the lens when the projector is turned on to avoid eye damage.
• Do not attempt to disassemble this projector as it may contain dangerous high voltage components. This projector must only be maintained and repaired by a qualified or authorized technician.
• Do not expose this projector to rain or moisture (operating humidity is 20%-80%).
• Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got into its housing, and have it checked by a qualified technician before using it again.
• Do not place this projector in any of the following environments: In poorly ventilated or narrow spaces, near devices that produce a strong magnetic field, in direct sunlight, in extremely hot, cold or humid environments, or close to a fire alarm.

Cautions:

• Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Product Overview

The Xiaomi Smart Projector L1 features a projector lens, camera, speaker, rubber feet, power button, and a nut hole for mounting bracket.

Ports:

• 1: Headphone Port
• 2: HDMI Signal Input Port
• 3: USB 2.0 Protocol Port
• 4: DC IN DC Port

Cautions:

• Do not look directly into the projection lens to avoid eye damage as this projector emits strong light during use.
• Do not place any objects within a range of 20 cm around the air inlet and outlet to avoid affecting the heat dissipation and causing damage or posing hazards.
• If mounting is required, please purchase a compatible mounting bracket with screws meeting the following specifications: a diameter of 1/4 inch and a length of less than 8 mm.
• Retain the original packaging for future storage or transportation.

Remote Control

The remote control includes:

• Power Button: Turn on or turn off the projector.
• Google Assistant: Ask Google Assistant to find movies, stream apps, play music, and control the projector with your voice.
• Navigation Button: Move up, down, left, or right.
• Confirm Button: Press to confirm.
• Back Button: Return to the previous screen.
• Home Button: Return to the home screen.
• Settings Button: Open the control panel.
• Netflix Button: Access the Netflix app.
• YouTube Button: Access the YouTube app.
• Volume Button: Volume up (+) and volume down (-).

Notes:

• It is recommended to use the remote control within a distance of 5 meters from the projector.
• Make sure the positive and negative poles are installed correctly when placing the batteries into the remote control.
• Dispose of used batteries in accordance with local waste disposal regulations and guidelines of the country or region you live in.

Remote Control Button Identification:

• The dented part of the remote control is the confirm button, and the surrounding ring-shaped buttons are the navigation buttons for up, down, left, and right.
• There are two buttons above the ring-shaped navigation buttons: the top one is the power button and the second one is the Google Assistant button.
• The first row below the ring-shaped navigation buttons includes, from left to right, the back, home, and settings buttons.
• The second row includes, from left to right, the Netflix and the YouTube buttons.
• The third row includes the bar-shaped volume buttons, with the + button for volume up and the – button for volume down.

How to Use

Remote Control Pairing

Turning On: When the projector is connected to the power supply, press the power button on the projector or the power button on the remote control to turn on the projector.

Turning Off: Press the power button on the projector or the power button on the remote control to bring out the turning off menu, and select the corresponding option.

Pairing Procedure:

1. Make sure the remote control has batteries installed and the projector is turned on.
2. Place the remote control near the projector, within a distance of 20 cm, and simultaneously press and hold the back button ← and the home button ? for 3 seconds to trigger the remote control pairing.
3. Once completed, the screen will indicate that the remote control is paired successfully.

Adjusting Image Focus

Auto Focus

• The auto focus function is enabled by default. When this function is triggered by moving the projector, the image focus will be automatically adjusted. Alternatively, you can select Settings > Projector > Focus > Execute Focus, and the image focus will also be automatically adjusted.
• You can enable or disable the auto focus function by selecting Settings > Projector > Focus > Auto Focus.

Visual Description: Two square frames are shown, indicating the area of focus. Text below reads "Auto focusing......".

Manual Focus

• You can select Settings > Projector > Focus > Manual Focus, and use the left and right buttons on the remote control to manually adjust the focus.

Visual Description: A circular reticle is shown with crosshairs, indicating focus adjustment. Text below reads "Press the Left and Right buttons to focus manually.".

Note: After auto focus is completed, you can also press the confirm button to enter manual focus, and use the navigation button on the remote control to move left and right for further fine-tuning.

Image Correction

Auto Keystone Correction

• The auto keystone correction function is enabled by default. When this function is triggered by moving the projector, the keystone correction will be automatically applied to the image. Alternatively, you can select Settings > Projector > Keystone > Execute auto keystone correction, and the keystone correction will be automatically applied to the image.
• You can enable or disable the auto keystone correction function by selecting Settings > Projector > Keystone.

Visual Description: A checkerboard pattern is displayed, with some squares distorted, indicating keystone correction. Text reads "Auto keystone correction in progress...".

Manual Keystone Correction

• You can select Settings > Projector > Keystone > Manual keystone correction, and use the remote control to adjust the image corners for correction.

Visual Description: A rectangular frame is shown with corner adjustment points. Text reads "The aspect ratio is optimal when the circle in the figure above is properly displayed. Press the Confirm button to edit and press the Back button to exit. Reset".

Note: After auto keystone correction is completed, you can also press the confirm button on the remote control to enter manual keystone correction, and use the remote control to fine-tune the image corners for correction.

Auto Obstacle Avoidance and Auto Screen Alignment

Auto Obstacle Avoidance

• This function is enabled by default. During auto image correction, the projector will automatically detect and avoid obstacles in the projected area, ensuring an unobstructed and complete image. The image may zoom out based on the positions and sizes of the obstacles.
• You can enable or disable this function by pressing the settings button on the remote control and selecting Settings > Projector > Keystone > EasyView.

Auto Screen Alignment

• This function is enabled by default. During auto image correction, the projector will automatically detect the screen (sold separately) and align the image with all four edges of the screen.
• You can enable or disable this function by pressing the settings button on the remote control and selecting Settings > Projector > Keystone > EasyFit.

Projection Distance & Screen Dimensions

Determine the distance between the projector and the screen according to the desired screen size.

Screen Dimensions (SD): The diagonal size of the projection screen (in inches).

Projection Distance (D): The distance between the front end of the projector and the screen (in centimeters).

Screen Width (W): The width of the image projected on the wall (in centimeters).

Note: The values in the table above are for reference only. They may slightly differ from the actual values. Please refer to the actual values.

Specifications

Troubleshooting

Regulatory Compliance

CE Marking:

Hereby, [Xiaomi Communications Co., Ltd.] declares that the radio equipment type [Xiaomi Smart Projector L1/ XMTYY03FMG] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Operation Frequency:

• Bluetooth: 2.4 GHz-2.4835 GHz (Max RF Power Output: < 10 mW)
• Wi-Fi 2.4 GHz: 2.4 GHz-2.4825 GHz (Max RF Power Output: < 100 mW)
• Wi-Fi 5 GHz: 5.15 GHz-5.35 GHz and 5.47 GHz-5.725 GHz (Max RF Power Output: < 200 mW for 5.15 GHz-5.25 GHz, < 100 mW for 5.25 GHz-5.35 GHz & 5.47 GHz-5.725 GHz)

Note: Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user. This device is restricted to indoor use when operating in the 5150 to 5350 MHz.

Country Codes:

Product Certifications

Hereby, [Xiaomi Communications Co., Ltd.] declares that the radio equipment type [Bluetooth® Voice Remote/RC604-MG1] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Operation Frequency: 2.4 GHz-2.4835 GHz

Maximum RF Power Output: < 10 mW

Note: The Bluetooth® Voice Remote has been evaluated to meet general RF exposure requirement. It can be used in portable exposure condition without restriction.

♻️ All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

The projector is designed for single-user use.

The projector features Bluetooth and Wi-Fi capabilities, with both enabled by default upon startup.

TCP ports 6466 and 6467 are open by default for Google's remote control services.

The projector has a built-in camera that enables auto focus and keystone correction.

Trademarks and Legal Information

HDMI™

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [Xiaomi Inc.] is under license. Other trademarks and trade names are those of their respective owners.

Dolby Audio

Dolby, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories.

Google TV is the name of this device's software experience and a trademark of Google LLC. Google, YouTube and Android TV are trademarks of Google LLC.

Google Assistant is not available in all languages and countries. Availability of services varies by country and language.

The product label and certification information are located at the bottom of the product.

Manufacturer: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, 100085, China
For further information, please go to www.mi.com
User Manual Version: V1.0