Mi Smart Projector 2 User Manual

User Notice

Thank you for choosing the Mi Smart Projector 2. Please read this manual carefully before use and retain it for future reference. Illustrations of the product, accessories, and user interface are for reference purposes only. Actual product and functions may vary due to product enhancements.

Safety Instructions

Before using the product, please carefully read the following safety instructions:

• ⚠️ Electric Shock Hazard: This product contains non-insulated voltage sources that can cause an electric shock. Contact with any internal component may result in an electric shock.

• Important Information: This symbol indicates important handling and maintenance information. Please read this information carefully to ensure proper use.

• High Temperatures: This symbol informs the user to be aware of high temperatures.

• Avoid Touching: This symbol informs the user to avoid touching this part.

Transportation Instructions: It is recommended to transport this projector in its original or similar packaging.

Preventing Electric Shocks and Fire Hazards

• Only use the provided genuine power adapter.
• Unplug the projector from the electrical outlet during thunderstorms or when it is not being used for a long time to avoid damage from power surges or lightning strikes.
• Do not place any flammable objects near this projector to avoid fire.
• Do not block any vents, as this may cause heat build-up inside the projector and potentially result in a fire.
• Do not block the lens when the projector is turned on. Objects placed close to the lens may get very hot, deform, or cause a fire.

Safety Precautions

• Do not place this projector on an unstable platform, stand, or table to prevent it from falling and causing serious damage or personal injury.
• Do not look directly into the lens when the projector is turned on to avoid eye damage.
• Do not attempt to disassemble this projector, as it may contain dangerous high voltage components. This projector must only be maintained and repaired by a qualified or authorized technician.
• Do not expose this projector to rain or moisture (operating humidity is 20%-80%).
• Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object gets into its housing and have it checked by a qualified technician before using it again.
• Do not place this projector in the following environments:
  • In poorly ventilated or narrow spaces.
  • Near devices that produce a strong magnetic field.
  • In direct sunlight.
  • In extremely hot, cold, or humid environments.
  • Close to a fire alarm.

Exterior

Diagram Description: The exterior of the projector shows the following components:

• Projection Lens: The primary lens for projecting the image.
• Camera: Likely for autofocus or keystone correction sensors.
• On/Off Button: A button to turn the projector on or off.
• Rubber Feet: Located at the bottom for stability.
• Air Inlet: Vents for air intake.
• Heat Dissipation Vent: Vents for expelling heat.
• Connection Ports: Located on the back or side for various inputs/outputs.
• 1/4" Female Threaded Tripod Mount: A standard mounting point for tripods or ceiling mounts.

Caution:

• The air vents allow air exchange. Do not place any objects within 20 cm of the air vents.
• Do not look directly into the lens to avoid eye damage, as the projector emits strong light during operation.
• If you plan to mount the projector on a suspended ceiling, ensure you select the correct screws and bracket.

Connection Ports

The projector features the following connection ports:

• 1. DC IN: DC power input port.
• 2. Headphone Port: For connecting external audio devices.
• 3. USB 2.0: Supports USB 2.0 devices.
• 4. HDMI: HDMI input port for video and audio signals.

Remote Control

The remote control provides access to projector functions:

• Power Button: Press to turn on when off; press to open the menu when on, then select to turn off.
• Google Assistant: Press the Assistant button to interact with Google Assistant.
• Navigation Pad: Use up, down, left, or right to navigate, and press the center to confirm.
• APP: Access the app interface.
• Return: Go back to the previous menu.
• Home: Return to the home screen.
• Volume Button: Use '+' to increase volume and '-' to decrease volume.

Pairing the Remote Control: Hold the remote control close to the projector (within 20 cm) and simultaneously press the APP button and the Home button.

Special Buttons:

• NETFLIX: Access the Netflix App.
• LIVE: Access the Live Channel.

Note:

• Pay attention to the polarity of batteries when installing them in the remote control.
• Dispose of or recycle batteries according to local laws and regulations.
• It is recommended that the distance between the remote control and the projector is no more than 5 meters.
• Illustrations of the remote control are for reference only; actual products and functions may vary by region.

Auto Focus

To adjust focus:

• Navigate to Settings > Projector > Focus and select Execute Focus. The screen will focus. You can use the left or right buttons on the remote for fine-tuning.
• Alternatively, go to Settings > Projector > Focus and enable the Auto Focus switch. Moving the projector will then automatically trigger the screen to focus.

Diagram Description: The Auto Focus screen shows a target reticle with crosshairs and corner markers, indicating the area being focused.

Keystone Correction

To adjust keystone correction:

• Navigate to Settings > Projector > Keystone Correction > Keystone Correction. Use the up and down buttons to select Quick Adjustment, Fine Tuning, or Reset, then press OK to enter the correction mode.
• If the projector is moved, it will automatically perform keystone correction, adjusting the projected image.

Diagram Description: The Keystone Correction screen shows a projected image that is trapezoidal, with options for Quick Adjustment, Fine Tuning, and Reset. The adjustment process aims to make the projected image rectangular.

Note: Auto Keystone is enabled by default. Configure it via Settings > Projector > Keystone Correction.

Frequently Used Menu

Open the app and select Launch Board to view frequently used functions. Select User Manual for detailed instructions.

Diagram Description: The menu displays "Common Functions" including Execute Focus, Keystone Correction, Bluetooth Speaker, File Manager, and "System Apps" including Settings, Inputs, and User Manual.

Note: The menu page may be updated; the current app version prevails.

Specifications

Troubleshooting

Regulatory Compliance

WEEE Symbol: Products bearing this symbol are waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. Hand over your waste equipment to a designated collection point for recycling to protect human health and the environment. Contact local authorities for more information.

EU Declaration of Conformity: Formovie (Chongqing) Innovative Technology Co., Ltd. declares that the radio equipment type [Mi Smart Projector 2/ XMTYY02FMGL] complies with Directive 2014/53/EU. The full text is available at: http://www.mi.com/global/service/support/declaration.html

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

RF Specifications:

• Bluetooth: Operation Frequency: 2.4 GHz-2.4835 GHz; Maximum RF Power Output: < 10 mW.
• Wi-Fi 2.4 GHz: Operation Frequency: 2.4 GHz–2.4835 GHz; Maximum RF Power Output: < 100 mW.
• Wi-Fi 5 GHz: Operation Frequency: 5.15 GHz–5.35 GHz and 5.47 GHz–5.725 GHz; Maximum RF Power Output: < 200 mW.

Note: Maintain a separation distance of at least 20 cm between the antenna and the user's body during normal use.

The product complies with "RG1 IEC 62471-5:2015".

Caution:

• Risk of explosion if the battery is replaced by an incorrect type.
• Do not dispose of batteries in fire or a hot oven, or crush/cut them mechanically, as this can result in an explosion.
• Avoid exposing batteries to extremely high temperatures, which can cause explosion or leakage of flammable liquid or gas.
• Avoid exposing batteries to extremely low air pressure, which may result in explosion or leakage of flammable liquid or gas.

Product Certifications

DTS: Manufactured under license from DTS, Inc. For DTS patents, see http://patents.dts.com. DTS, DTS-HD Master Audio, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc.

Dolby Audio: Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Xiaomi Inc. uses these marks under license. Other trademarks and trade names belong to their respective owners.

HDMI™: The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

EAC Mark: [EAC Mark]

Manufacturer Information:

• Manufactured for: Xiaomi Communications Co., Ltd.
• Manufactured by: Formovie (Chongqing) Innovative Technology Co., Ltd.
• Address: 4-401, #2 Longgang Road, Guojiatuo Area, Jiangbei District, Chongqing, China
• For further information, please visit: www.mi.com
• Production Date: See packaging
• Made in China