JBC JTH Heating Element for JTT - Instruction Manual

JTH Heating Element for JTT

References

This manual corresponds to the following references:

JTH1 (100V/120V)
JTH2 (230V)

Packing List

The following items are included:

JTH Heating Element for JTT ...... 1 unit (according purchased reference included either JTH1 Ref. 0014105 (100V/120V) or JTH2 Ref. 0014107 (230V))
Manual .................................... 1 unit (Ref. 0029042)

Changing JTT Heater Hose Set

Note: Only perform this operation when the station is turned off.

Use a spanner to unscrew the nut (1) and remove the tool hose (2).

[Diagram description: A soldering station connection point is shown with a spanner turning a nut labeled '1' to remove or attach a hose labeled '2'.]

Insert the new hose, make sure it is pushed all the way into the connector (2), and tighten the nut (1).

Features

JTH1 and JTH2 Heating Elements are designed to be used with JT Handle. Both, as a set, work with JTU Control Unit and JT Nozzles.

Replacing the Heating Element

Note: Only perform this operation when the heating element is cold and the unit is disconnected from the mains.

Loosen the screw (1) and pull the worn heating element out of the handle (2).

[Diagram description: The JBC JTH Heating Element, JT Handle, and JT Nozzle are illustrated. The JTH Heating Element (Ref. 0014105/0014107) connects to the JT Handle (Ref. JT-A), which features a 'Tool Button: Start/stop blowing hot air'. A screw labeled '1' secures the element in the handle labeled '2'. The JTT Heater Hose Set (Ref. JT-T1A/JT-T2A) is also indicated.]

Insert the new heating element, make sure its pushed all the way in (2) and tighten the screw (1).

* Components not included, sold separately.

Specifications

JTH1 / JTH2 Heating Element for JTT
Ref.:	0014105 (100V/120V)
Ref.:	0014107 (230V)
Total Net Weight:	56 g / 0.123 lb
Package Dimensions/Weight (L x W x H):	236 x 41 x 41 mm / 81 g 9.29 x 1.61 x 1.61 in / 0.179 lb
Complies with CE standards. ESD safe.

Warranty

JBC's 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

Environmental and Recycling Information

This product should not be thrown in the garbage.

In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

[CE certification] [EAC certification] [Recycling symbol]

	JBC JTQ Hot Air Station Instruction Manual Comprehensive instruction manual for the JBC JTQ Hot Air Station without Extractor Desk, detailing features, operation, maintenance, and specifications. Learn how to use your JBC soldering equipment safely and effectively.
	JBC JTSE Power Hot Air Station: Plug & Play Guide Concise guide to the JBC JTSE Power Hot Air Station, covering packing list, installation, and specifications. Includes references JTSE-9B, JTSE-1B, JTSE-2B.
	JBC JT Nozzles for JTT Heater Instruction Manual Comprehensive instruction manual for JBC JT Nozzles designed for the JTT Heater, detailing models, specifications, and maintenance.
	JBC TES/JTS Stand for Heater Hose Set - Instruction Manual Official instruction manual for the JBC TES/JTS stand, designed for TET/JTT Heater Hose Sets. Covers features, assembly, maintenance, safety, and specifications. Learn how to properly use and care for your JBC stand.
	JBC DR560 Desoldering Iron: Instruction Manual and Specifications Comprehensive instruction manual for the JBC DR560 Desoldering Iron. Includes packing list, features, desoldering process, maintenance, safety guidelines, and specifications. Learn how to use and care for your JBC DR560.
	JBC HA245/HA470 Automatic Soldering Set for Robot - Instruction Manual Comprehensive instruction manual for the JBC HA245/HA470 Automatic General/Heavy Duty Soldering Set for Robot, detailing packing lists, component inclusions, features, connections, specifications, warranty, and disposal information.
	JBC B-100 Light Handle for B·IRON: Instruction Manual & Features Comprehensive guide to the JBC B-100 Light Handle for B·IRON soldering system. Covers features, operation, maintenance, and software updates for R&D and individual soldering tasks. Visit www.jbctools.com for more.
	JBC NT115 Nano Handle User Manual User manual for the JBC NT115 Nano Handle, providing instructions on its features, connections, grip replacement, tip replacement, compatible tips, and safety precautions.