JBC JT Nozzles Instruction Manual

Product References

This manual corresponds to the following references:

• Straight: JN2020, JN8417
• Bent: JN2015, JN2012, JN6633
• Flat: JN7637, JN7638, JN7639

Packing List

The following items are included:

• Nozzle for JTT Heater (according to purchased reference) - 1 unit
• Manual (Ref. 0029001) - 1 unit

Manual illustration shows three nozzles: straight, bent, and flat, along with the JBC logo and manual title.

Nozzle Models

Detailed view of nozzle shapes and dimensions:

Maintenance

In case of a loosely fitting nozzle:

1. Push the nozzle tab inwards slightly with a screwdriver or flat-nosed pliers. [Illustration shows a close-up of a nozzle tab being pushed inwards with a tool.]
2. Assemble the nozzle onto JTT again. [Illustration shows a nozzle being attached to a JTT heater.]

Specifications

JT Nozzles for JTT Heater

Package Dimensions: 60 x 35 x 27 mm (L x W x H) / 2.36 x 1.38 x 1.06 in

Warranty

JBC's 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. The warranty does not cover product wear or misuse. For the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

Environmental Information

This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. [Recycling symbol indicating separate collection for electronic waste.]

Certifications: CE, [ESD symbol], EAC

Visit us at: www.jbctools.com