ToolkitRC M7 Charger Manual

Introduction

Thank you for purchasing the ToolkitRC M7 model tool chain product. Please read this manual carefully before using it to ensure optimal performance and safety.

Key Points

• Tips: Helpful advice for using the M7 charger.
• Important: Critical information regarding safe operation.
• Information: General details and specifications.

Further Information

To stay updated with the latest news, information, and firmware updates for your charger, please scan the provided QR code or visit the official ToolkitRC website at www.toolkitrc.com.

Safety Precautions

Please adhere to the following safety guidelines:

1. Ensure a consistent input voltage of 7-28V and pay attention to polarity when connecting the power supply.
2. Avoid using the product in environments with high heat, humidity, flammable, or explosive gases.
3. Always use the product under supervision to prevent accidents.
4. Unplug the input power when the product is not in use.
5. When using the charging function, set a current that matches the battery specifications to prevent damage.

Product Description

The M7 is a multifunctional tool chain product that integrates several functions:

• Balanced charger and discharger for LiPo, LiHV, LiFe, Lion, NiMh, and PB batteries (1-6S for LiPo/LiHV/LiFe/Lion, 1-16S for NiMh, 1-10S for PB).
• Maximum charge current: 10A (200W).
• Discharge current: Recycle mode Max 10A (200W), External mode Max 10A (200W), Inter mode Max 3A (10W).
• Adjustable Lithium battery cut-off voltage (TVC function).
• Measures battery voltage, internal resistance, and performs lithium battery balance management.
• Measures PWM/PPM/SBUS signal values with 1-microsecond accuracy.
• Outputs PWM/PPM/SBUS standard signals with 1-microsecond accuracy.
• Provides a constant current and constant voltage source, customizable from 1-28V voltage and 1-10A current.
• Compatible with mainstream drone batteries, offering automatic activation and charging.
• Features a multi-language system, allowing firmware upgrades for any language.
• Includes USB 2.1A@5.0V output for charging mobile devices.
• The device can be upgraded via USB by copying the firmware file, simulating a U disk.

M7 Layout

The M7 features a clear layout for easy operation:

• Display: Shows all relevant charging information.
• Scroll Wheel: Used for navigation (turn left/right) and selection (press OK).
• Exit Button: For exiting menus or functions.
• Front Ports: Signal port, Cooling fan.
• Back Ports: Input port, USB Output & Upgrade port.
• Side Ports: Output port, Balance port.

Quick Start Guide

1. Connect the 7-28V power supply to the input port on the back of the M7.
2. The display will show the boot logo for 2 seconds, accompanied by a boot sound.
3. Upon completion of the boot sequence, the main interface will be displayed.
4. Navigate menus using the Scroll Wheel and confirm selections with the OK button.
5. Long press [Exit] to access auxiliary functions or [OK] to enter system settings.
6. Short press [OK] to select or start a charging task when the charger is idle.
7. Short press [Exit] to end modifications or return to the previous interface.
8. Short press [Scroll Wheel] to confirm a function; long press for 2 seconds to activate the delete function.

Charge and Discharge Settings

To configure charging and discharging:

1. From the main interface, select and press [OK] to enter the charging function.
2. Navigate to the battery selection option in system settings.
3. Select an existing battery profile or create a new one (up to 32 profiles can be saved).
4. Configure settings such as Battery Type (LiPo, LiHV, LiFe, Lion, NiMh, PB), Cells, Mode, End Voltage, and Charge Current.
5. Press [Start] to begin the charging process.