Bresser DST-1028 USB Digital Microscope

Introduction

Visit our website ? via the following QR code or web link to find further information on this product or available translations of these instructions. For comprehensive instructions in a specific language, please visit our website using the corresponding link (QR code) to view available versions.

www.bresser.de/P5808600

For warranty claims or service inquiries, please refer to the information on "Warranty" and "Service" in this documentation. We ask for your understanding that unsolicited returns cannot be processed. Errors and technical changes excepted. © 2022 Bresser GmbH. All rights reserved.

About this Instruction Manual

ℹ️ NOTICE: These operating instructions are to be considered a component of the device. Read the safety instructions and the operating manual carefully before using this device. Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

Intended Use

• This device is not intended for use by persons (including children) with impaired physical, sensory or mental abilities, or for lack of experience and/or knowledge, unless they are supervised by or have received instructions from a person responsible for their safety on how to use this device.
• This device is for personal use only.
• It was developed for a magnified representation of nature observations.
• The device is intended only for indoor use.

General Safety Instructions

⚠️ DANGER: Danger of suffocation!

Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!
• If small parts are swallowed, consult a doctor immediately!

❗ CAUTION: Risk of body injury!

This device contains components and/or accessories that can cause minor or serious body injury if used improperly. It is therefore essential that you observe the following safety information in order to prevent body injuries.

• Sharp-edged and pointed tools are often used for working with this device. Therefore, keep this device and all accessories and tools in a place inaccessible to children. Danger of body injury!
• Chemicals and liquids do not belong in children's hands! Don't drink! Clean hands thoroughly under running water after use. In case of accidental contact with eyes or mouth, rinse with water. In case of complaints, consult a doctor immediately and show the substances.

ℹ️ NOTICE: Danger of material damage!

Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

• Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
• Do not expose the device to high temperatures and protect it from water and high humidity.
• Do not subject the device to excessive vibrations.
• Only use accessories and spare parts for this device that comply with the technical specifications.

About this Microscope

This microscope is a digital microscope and does not offer the possibility of visual observation. It is equipped with an objective lens and a camera sensor for image recording. Digital images can be transferred directly to a Windows PC via the supplied USB cable, viewed there, and evaluated, optimized, and saved using the supplied software*. (*Windows version available for download; see download info on page 2).

Choice of Location

Choose a suitable location before installation and commissioning. Place the device on a stable, level, and vibration-free surface.

Parts Overview and Scope of Delivery

Illustration 1 shows all parts of the DST-1028 digital microscope. The components include the microscope head, USB connecting cable, running rail with integrated rack, trigger (function not available for this model), locking screw, height adjustment/focusing wheel, fixing screw, digital microscope holder, holding thread, extension piece, microscope base, objective lens, LED ring lighting, USB-A connector, dimmer wheel, and zoom ring with scale.

¹ Function not available for this model.

Scope of delivery: Digital microscope (A) with USB cable, microscope stand with running rail and holder (B), extension piece (C).

Assembling the Microscope

This microscope is designed for operation with a Windows PC. For assembly, proceed as follows:

1. Screw the running rail with the pre-assembled microscope holder into the holding thread. Make sure that the holder is facing forward as shown.
2. ℹ️ NOTICE! For higher observation objects, the supplied extension piece can first be screwed into the mounting thread. The rail is then screwed into the extension piece. This will increase the working height significantly.
3. Loosen the fixing screw on the holder and unscrew it slightly so that it does not block the retaining ring.
4. Insert the microscope head into the holder and hand-tighten the fixing screw.

Power Supply

Plug the USB-A connector of the USB cable into a free USB port of the PC. Power is supplied through the computer after it has been switched on. The LED ring lighting will light up. ?

Connecting to a PC

Use of this digital microscope requires a connection via USB to a PC running the Windows 10 operating system. Follow the steps below for proper connection:

1. Download and install the CamLabLite* software on the PC.
2. Mount the digital camera as described.
3. Insert the USB-A plug of the USB connection cable into a free USB port of the PC. If the connection is successful, the LED lights up. The digital microscope is ready for use.
4. The CamLabLite* software can be used to view and save images from the digital microscope. Furthermore, various image optimizations can also be made. Please also read the separate software instructions.

*Information about downloading the software and the software instructions can be found on page 2 of this manual.

Use of the Software

Bresser offers extensive software for editing and saving your digital images. This can be downloaded from the product page via the following link ("Software" section). Detailed software instructions in different languages can also be found at this link (section "Instructions").

https://www.bresser.de/P5808600

System requirements: PC/notebook with Intel i3, i5, i7 or i9 processor from 2nd generation or AMD FX or Ryzen processor, operating system Windows 8.1/10/11, free USB 2.0 port, internet connection for software download.

Adjusting the Lighting

The digital microscope is equipped with LED ring lighting ? for optimal object illumination and can be dimmed continuously.

1. Connect the digital microscope to the PC.
2. Once the LED lighting is on, the brightness can be adjusted continuously by turning the dimmer wheel on the USB cable.

Adjusting the Height of the Head

Depending on the size of the observation object or when changing the magnification setting, the position of the microscope head must be adjusted in height. To do this, proceed as follows:

1. Hold the microscope head and loosen the locking screw for the holder.
2. Turn the height adjustment wheel to move the microscope head up or down in the holder.
3. Hand-tighten the locking screw when the desired height position is reached.

ℹ️ NOTICE! Especially when changing the zoom range, it may be necessary to additionally change the position of the digital microscope in the holder. (see also "Focusing the object")

Adjusting the Zoom

The microscope optics have a zoom range from 10x to 280x. The zoom range can be changed by turning the zoom ring. The corresponding digit on the scale must be visible above the marking arrow.

ℹ️ NOTICE! When changing the zoom range, the focus may also need to be adjusted. (see also "Focusing the object")

Focusing the Object

For optimal image sharpness, the observation object must be brought into the focus range of the digital camera. To do this, proceed as follows:

1. Depending on the object height, assemble the extension piece if necessary.
2. Set the required head height for the digital microscope.
3. Make the desired magnification setting.
4. If necessary, correct the height and the position of the digital microscope in the holder slightly until the image on the monitor appears sharp.

⚠️ WARNING! Always hold the digital microscope firmly when loosening the locking screw or the fixing screw on the holder to prevent the digital microscope from sliding down. The digital microscope could hit the microscope base and be irreparably damaged!

Technical Data

*Data transfer and power supply are carried out via the USB port on the PC at the same time.

Materials

• Objective lens: glass, multi-coated
• Tripod: metal

Declarations of Conformity

An "EC Declaration of Conformity" in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text is available at: www.bresser.de/download/5808600/CE/5808600_CE.pdf

A "UKCA Declaration of Conformity" in accordance with applicable guidelines and corresponding standards has been issued by Bresser GmbH. The full text is available at: www.bresser.de/download/5808600/UKCA/5808600_UKCA.pdf

Disposal

Dispose of the packaging materials properly, according to their type (e.g., paper or cardboard). Contact your local waste-disposal service or environmental authority for information on proper disposal. Do not dispose of electronic devices in household garbage! According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.

Warranty

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at: www.bresser.de/warranty_terms ?️

Service Information

For any questions regarding the product or claims, please contact the service center first, preferably by e-mail ✉️ or phone ?.

Germany, Austria, Switzerland, Belgium:
E-mail: service@bresser.de
Phone: +49 28 72 80 74 350
Address: BRESSER GmbH, Kundenservice Mikroskopie, Gutenbergstr. 2, 46414 Rhede, Germany

Netherlands, Belgium:
E-mail: info@bresserbenelux.nl
Phone: +31 528 23 24 76
Address: BRESSER Benelux, Klantenservice, Smirnoffstraat 8, 7903 AX Hoogeveen, Nederland

United Kingdom, Ireland:
E-mail: service@bresseruk.com
Phone: +44 1342 837 098
Address: BRESSER UK Ltd, Customer Support, Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, United Kingdom

France, Belgium:
E-mail: sav@bresser.fr
Phone: 00 800 6343 7000 (local call rate from France or Belgium)
Address: BRESSER France SARL, Service après-vente, Pôle d'Activités de Nicopolis, 314 Avenue des Chênes Verts, 83170 Brignoles, France

Spain, Portugal:
E-mail: servicio.iberia@bresser-iberia.es
Phone: +34 91 67972 69
Address: BRESSER Iberia SLU, Servicio al Cliente, c/Valdemorillo, 1 Nave B, P.I. Ventorro del cano, 28925 Alcorcón, Madrid, España