Fisher TOTAL WIRELESS COMBO

Product Introduction

The Fisher FTW600 Total Wireless Combo features true wireless earphones designed for music and calls.

[Image: Two black wireless earbuds and their charging case. The earbuds have a touch button on the side.]

Function and Description

1. How to connect:

• First time use: Take out the earphones; they will turn on automatically. Open your smartphone's Bluetooth, search for "FISHER-FTW600" to pair and connect. You can then listen to music or make calls.
• Subsequent use: The earphones will connect to each other and your phone automatically.
• If an earphone does not connect to any device within 5 minutes, it will power off automatically.
• Note: You can use a single earphone independently.

2. How to Disconnect:

Place the earphones into the charging case. They will disconnect automatically and begin charging. Alternatively, press the charging case button to start charging.

3. How to use:

On Music:

• Press the right earphone three times to play the next song.
• Press the left earphone three times to play the previous song.
• One press on either earphone plays or pauses the song.
• Press and hold the right earphone for approximately 1.5 seconds to increase volume. Press and hold the left earphone for approximately 1.5 seconds to decrease volume. (Note: This feature may not be supported by all phone software versions).

On Call:

• One press answers the call and one press hangs up the call.
• Long press rejects an incoming call.

Google & Siri:

Double-press the left or right earphone to activate Google Assistant or Siri. Press once to quit.

4. How to charge:

Charging for earphone:

Place the earphones into the charging case for automatic charging. When the charging case battery is low, connect the Type-C cable. The LED light will flash red quickly. When the case is fully charged, the red LED light will stop flashing. When the charging cable is unplugged, the red light will change to blue.

Charging for charging case via cable:

1. Use the included cable to charge the earphones.
2. It is recommended to use a 1A – 2A charger.

Charging for charging case via wireless charger:

1. Use the included cable to power the wireless charger.
2. It is recommended to use a 1A – 2A charger.
3. Place the charging case onto the wireless charger.

During wireless charging, the indicator light will flash red. When the case is fully charged, the indicator light will stop flashing and remain red.

5. Package Includes:

• True wireless earphones
• Wireless charger
• Case cover
• Pair of Silicone wings
• Neck strap
• Carabiner
• 1 USB cable
• User manual
• Warranty card

Product Specification

1. Earphone specification:

2. Charging box parameter:

(Note: Battery life & charging time may vary based on usage & types of devices used.)

3. Wireless charger specification:

FCC Information

FCC-ID:

• TRUE WIRELESS EARPHONES FCC ID: 2AIDL-SS-FTW600
• Charging compartment FCC ID: 2AIDL-SS-FTW600C
• Wireless charger FCC ID: 2AIDL-SS-FTWI600

FCC WARNING:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 & Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

RF exposure (TRUE WIRELESS EARPHONES):

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

RF exposure (Charging compartment & Wireless charger):

This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.

Matters Needing Attention

1. Please confirm if your device supports wireless charging function; otherwise, it will not be charged.
2. Please do not place magnetic objects such as metal/magnetic discs/credit cards on the wireless charger, as this may result in inability to charge.
3. Do not use this product in high temperature and humid environments to avoid malfunctions, damage, or leakage.
4. Do not splash water or other liquids onto the wireless charger. If cleaning is required, please make sure to disconnect the power supply.