FISHER FBX1548SM 15" Portable DJ Speaker User Guide
Model: FBX1548SM | Version: 2021.7.7
Product Overview
A FISHER 15" Portable DJ Speaker, model FBX1548SM, featuring a dynamic LED light display on the front, designed for portable audio entertainment.
Instructions
Charging and Battery Usage
- When the battery is drained, connect the unit to an electrical socket using the provided voltage.
- A voltmeter reading below 3.7V indicates a low battery. Ensure the AC/DC switch is ON during charging.
- Charge for 10-12 hours for the first use, and 8-10 hours for subsequent uses.
- Battery life is approximately 2-4 hours, depending on the volume level.
Fuse Replacement
- If replacing the fuse, use only a 10AMP fuse.
Attention Points
- To prolong battery life, charge the battery after each use. Failure to charge frequently may damage the battery.
- For any product issues, consult a professional for repairs, as this is a high-power electronic device.
- Keep the unit away from children.
Panel Function Declaration
- 1. USB/TF CARD PORT
- Slot for USB flash drives and TF cards.
- 2. VOLUME CONTROL
- Adjusts the overall volume.
- 3. LINE IN
- Audio input for connecting external devices via cable.
- 4. BASS LEVEL
- Controls the bass frequency response.
- 5. TREBLE LEVEL
- Controls the treble frequency response.
- 6. ECHO LEVEL
- Adjusts the echo effect for microphones.
- 7. MIC.VOL
- Controls the microphone volume.
- 8. Charging Indicator
- Red light indicates charging; green light indicates full charge.
- 9. MIC.INPUT
- Microphone input port.
- 10. Microphone Priority
- Enables microphone audio to lower music volume.
- 11. Sound Recording
- Function for recording audio.
- 12. MODE
- Switches between LINE-IN, USB, FM, and BLUETOOTH modes.
- 13. NEXT SONG/NEXT CHANNEL
- Advances to the next track or FM channel.
- 14. HI: PLAY/PAUSE / TWS switch
- Plays or pauses audio. In FM mode, long press to auto-scan channels. Long press for 3 seconds to activate/deactivate TWS.
- 15. PREVIOUS SONG/PREVIOUS CHANNEL
- Returns to the previous track or FM channel.
- 16. LIGHT SWITCH
- Controls the LED lighting effects.
- 17. POWER ON/OFF
- Main power switch for the unit.
- 18. DC INPUT
- Port for DC power adapter connection.
Remote Function Declaration
- 1. MUTE
- Press to mute the audio output.
- 2. MODE
- Switches between Media Input Modes: FM, Wireless Connection (Bluetooth), or Line-In.
- 3. Power On/Off
- Turns the unit's power on or off.
- 4. Previous track
- Selects the previous song or FM channel.
- 5. Play/Pause
- Press to play or pause the current track. In FM mode, long press for auto-scan.
- 6. VOL-
- Decreases the volume level.
- 7. EQ
- Cycles through preset equalizer settings.
- 8. Number keypad (0-9)
- Allows direct selection of tracks or channels.
- 9. USB/TF
- Selects USB or TF card as the audio input source.
- 10. REPEAT
- Toggles repeat mode for the current track or folder.
- 11. VOL+
- Increases the volume level.
- 12. Next track
- Selects the next song or FM channel.
Bluetooth Function Declaration
- Press the MODE button on the front panel to activate Bluetooth mode. The screen will display "FISHER-FBX1548SM".
- Ensure Bluetooth is enabled on your device (e.g., cellphone, computer).
- Your device will scan for nearby Bluetooth devices.
- Select "FISHER-FBX1548SM" from the list of detected devices on your device to pair.
- Once paired, Bluetooth is ready for operation.
True Wireless Stereo (TWS) Function
TWS allows you to connect two compatible speakers via Bluetooth to play audio simultaneously, doubling the sound output.
- To activate TWS: While in Bluetooth playback mode, long press the "TWS" key (Button 14 on the panel) for 3 seconds.
- To deactivate TWS: Long press the "TWS" key again for 3 seconds.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
