EcoFlow Power Hub User Manual V1.0

Disclaimer

Read this user manual carefully before using the product to ensure that you completely understand the product and can correctly use it. After reading this user manual, keep it properly for future reference. Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss. Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document. EcoFlow is not liable for any loss caused by the user's failure to use this product in compliance with this user manual. In compliance with laws and regulations, EcoFlow reserves the right to final interpretation of this document and all documents related to this product. This document is subject to changes (updates, revisions, or termination) without prior notice. Please visit EcoFlow's official website to obtain the latest product information.

Technical Specifications

Safety Instructions

• SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions.
• Before using battery charger function, read all instructions and cautionary markings on battery charger, battery, and product using battery.
• CAUTION To reduce risk of injury, charge only LiFePO4 type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
• This is a Safety Class I product (supplied with a protective grounding terminal). Uninterruptible protective grounding must be provided at the AC input and/or output terminals. Alternatively, the grounding point located externally on the product may be used. Whenever it is likely that the grounding protection has been damaged, the product must be turned off and secured against unintended operation; please contact qualified service staff.
• To prevent fire, short circuits, and electric shocks, do not install this product in environments with high humidity, high temperature, or conductive contaminants.
• Before installing this product, disconnect the main power supply. Do not work with live power.
• Keep this product away from heat sources, such as fires or heating furnaces.
• Keep this product away from any liquid. Do not immerse this product in water or get it wet. Do not use this product in rain or humid environments.
• Do not use this product in environments with strong static electricity or magnetic fields.
• Do not disassemble this product in any way or pierce it with sharp objects.
• Do not use wires or other metal objects that may result in a short circuit.
• Do not use unofficial components or accessories. If components or accessories need to be replaced, purchase them from the EcoFlow official sales channels.
• Strictly comply with the ambient temperature for use in this user manual when using this product.
• Do not stack other heavy objects on this product.
• Do not forcibly block the fan during product use or place the product in an unventilated or dusty area.
• Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts.
• If the product falls into water accidentally during use, place it in a safe open area and stay away from it until it is completely dry. The dried product cannot be reused, and should be properly disposed according to the method described in the EcoFlow Battery User Manual. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and carbon dioxide fire extinguisher.
• If there is dirt on the ports of the product, clean it with a dry cloth.
• Place this product carefully to prevent damage caused by the product falling over. If the product falls over and is seriously damaged, power it off immediately.
• Keep this product out of reach of children and pets.

EcoFlow App

Control, monitor and customize your Power Kits from afar with the EcoFlow App. Download at: https://download.ecoflow.com/app

By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of Use and Privacy Policy, which you can access via the "About" section of the "User" page on the EcoFlow App or on the official EcoFlow website at https://www.ecoflow.com/policy/terms-of-use and https://www.ecoflow.com/policy/privacy-policy

Bluetooth of this product can only be connected with one EcoFlow App account. If you need to connect the product through another account, you can reset the Bluetooth through the App or by long pressing the DC button of the product for 3 seconds ⏱️.

Getting Started

System Overview

The EcoFlow Power Hub system diagram illustrates how various components connect to form a complete power solution. The central EcoFlow Power Hub (1) acts as the core, connecting to an AC/DC Smart Distribution Panel (2) and a Power Kit Console (3). It can integrate with EcoFlow 2kWh or 5kWh LFP Batteries (4) and an EcoFlow Smart Generator (5). Power sources include Shore Power/Grid Power (6), Rigid/Flexible Solar Panels (7), Foldable/Portable Solar Panels (8), and a Vehicle Alternator (9). The system powers DC Appliances (3) and AC Appliances (1).

Important Notes:

• If the product is installed in an enclosed space, proper ventilation is a MUST to prevent this product from overheating.
• For safety reasons, it is recommended to install a Ground Fault Circuit Interrupter (GFCI), also known as Residual Current Device (RCD) in the AC input and AC output of the Power Hub. Please refer to local regulations regarding grounding of autonomous power systems.
• Before connecting this product to an EcoFlow LFP Battery, ensure that there is no charging input connected to the Power Hub and the LFP Battery is powered off.
• It is not recommended to use one Power Hub with both 2kWh and 5kWh LFP battery at the same time.
• It is not recommended to connect or disconnect the LFP battery when the system is on.

Product Overview

The EcoFlow Power Hub has a front panel with various ports and indicators. From left to right on the top row: ALT IN / PV IN 1 Port (1), PV IN 2/3 Port (2), Battery 1/2/3 Port / Smart Generator Port (3), AC IN Port (4), and AC OUT Port (5) (specific to region). The front panel also features a Main Power Button (6), DC OUT Button (7), AC OUT Button (8), and indicators for AC Out (9), DC Out (10), AC IN (11), PV IN 2/3 (12), and ALT IN / PV IN 1 (13). The rear or side panel includes RJ45 CAN Bus Ports (14), DC Main OUT Port (15), AC Main OUT Port (16), an Earth Stud (17), an Air Outlet (18), and an Air Inlet (19).

CAN Bus Connection

The CAN Bus connection diagram shows two RJ45 CAN Bus Ports (14) on the Power Hub. It illustrates three scenarios for system communication stability:

1. When neither the AC/DC Smart Distribution Panel nor the Power Kit Console is connected, two RJ45 CAN Bus terminators must be connected to the Power Hub's CAN Bus ports.
2. When the AC/DC Smart Distribution Panel and the Power Kit Console are connected to the Power Hub, no terminators are needed on the Hub itself (they are assumed to be on the connected devices or not required).
3. When either the AC/DC Smart Distribution Panel or the Power Kit Console is connected, one RJ45 CAN Bus terminator must be connected to the Power Hub's remaining CAN Bus port.

Both ports must be connected to stabilize communication throughout the system. Not doing so will cause the system to malfunction.

Product Usage

FAQs

What's in the Box

• Power Hub 1
• Solar Charge Cable (6m/20ft) 1
• Mounting Kit (Back) 1
• Mounting Kit (Bottom) 1
• RJ-45 CAN Bus Terminator 2
• M5*20 (7pcs)
• M4*10 (6pcs)
• User Manual 1
• Warranty Card 1
• Quick Start Guide 1

Care and Maintenance

Use or store this product in an environment with a temperature ranging from -25C (-13F) to 60C (140F) and keep this product away from water sources, heat sources, and metal objects. For safety reasons, do not store this product in an environment where the temperature is higher than 45C (113F) or lower than 0C (32F) for a long time.

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.