Manuals+

RACKS BRAX COMPATIBILITY POCKET GUIDE

FOR TRED TOTAL RECOVERY & EXTRACTION DEVICE

FAST ON! FAST OFF!

TRED® GT, GT COMPACT

ITEMS REQUIRED MINIMUM FOR FAST ON, FAST OFF!

Item Details
MOUNTING POINTS 2
HITCHES NEEDED 8159 - HD Hitch Standard AND 8210 – HD Accessory Plate Gen 2
ALSO REQUIRED

Where brackets cannot be located at recovery board pin centres, the distance between the centres of the recovery board mounting points. This is typical of roof rack bars or platform racks with slats/bars that run TRANSVERSE (across the width of the vehicle); OR

8173 - HD Accessory Bars: Where brackets can be located at 890mm centres (typically for platform racks with slats that run LONGITUDINAL (along the length of the vehicle).

BRACKETS REQUIRED FOR FAST ON, FAST OFF!

Bracket Type / Vehicle Rack Style Bracket Model Description

FOR BARS OR PLATFORM STYLES WITH TRANSVERSE SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8304 – HD Adjustable Brackets Short (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical); OR

FOR PLATFORM STYLES WITH LONGITUDINAL SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8306 – HD Adjustable Brackets Long (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).

*ROOF RACKS WITH PERIMETER LIPS REQUIRE PACKERS TO FIT RACKSBRAX BRACKETS (SOLD SEPARATELY). REFER TO ROOF RACK GUIDE FOR MORE INFORMATION ON RACKS WITH PERIMETER LIPS.

+ These brackets are both height and angle adjustable.

TRED® HD, HD COMPACT

ITEMS REQUIRED MINIMUM FOR FAST ON, FAST OFF!

Item Details
MOUNTING POINTS 2
HITCHES NEEDED 8159 - HD Hitch Standard AND 8210 – HD Accessory Plate Gen 2
ALSO REQUIRED

Where brackets cannot be located at recovery board pin centres, the distance between the centres of the recovery board mounting points. This is typical of roof rack bars or platform racks with slats/bars that run TRANSVERSE (across the width of the vehicle); OR

8173 - HD Accessory Bars: Where brackets can be located at 890mm centres (typically for platform racks with slats that run LONGITUDINAL (along the length of the vehicle).

BRACKETS REQUIRED FOR FAST ON, FAST OFF!

Bracket Type / Vehicle Rack Style Bracket Model Description

FOR BARS OR PLATFORM STYLES WITH TRANSVERSE SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8304 – HD Adjustable Brackets Short (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical); OR

FOR PLATFORM STYLES WITH LONGITUDINAL SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8306 – HD Adjustable Brackets Long (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).

*ROOF RACKS WITH PERIMETER LIPS REQUIRE PACKERS TO FIT RACKSBRAX BRACKETS (SOLD SEPARATELY). REFER TO ROOF RACK GUIDE FOR MORE INFORMATION ON RACKS WITH PERIMETER LIPS.

+ These brackets are both height and angle adjustable.

TRED® MINIS 1:10 Scale

SADLY NOT COMPATIBLE ?

TRED® PRO

ITEMS REQUIRED MINIMUM FOR FAST ON, FAST OFF!

Item Details
MOUNTING POINTS 2
HITCHES NEEDED 8159 - HD Hitch Standard AND 8210 – HD Accessory Plate Gen 2
ALSO REQUIRED

Where brackets cannot be located at 890mm centres, the distance between the centres of the recovery board mounting points. This is typical of roof rack bars or platform racks with slats/bars that run TRANSVERSE (across the width of the vehicle); OR

8173 - HD Accessory Bars: Where brackets can be located at 890mm centres (typically for platform racks with slats that run LONGITUDINAL (along the length of the vehicle).

BRACKETS REQUIRED FOR FAST ON, FAST OFF!

Bracket Type / Vehicle Rack Style Bracket Model Description

FOR BARS OR PLATFORM STYLES WITH TRANSVERSE SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8304 – HD Adjustable Brackets Short (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical); OR

FOR PLATFORM STYLES WITH LONGITUDINAL SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8306 – HD Adjustable Brackets Long (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).

*ROOF RACKS WITH PERIMETER LIPS REQUIRE PACKERS TO FIT RACKSBRAX BRACKETS (SOLD SEPARATELY). REFER TO ROOF RACK GUIDE FOR MORE INFORMATION ON RACKS WITH PERIMETER LIPS.

+ These brackets are both height and angle adjustable.

TRED® RV

SADLY NOT COMPATIBLE ?

TRED® X ARB PRO

ITEMS REQUIRED MINIMUM FOR FAST ON, FAST OFF!

Item Details
MOUNTING POINTS 2
HITCHES NEEDED 8159 - HD Hitch Standard AND 8210 – HD Accessory Plate Gen 2
ALSO REQUIRED

Where brackets cannot be located at 890mm centres, the distance between the centres of the recovery board mounting points. This is typical of roof rack bars or platform racks with slats/bars that run TRANSVERSE (across the width of the vehicle); OR

8173 - HD Accessory Bars: Where brackets can be located at 890mm centres (typically for platform racks with slats that run LONGITUDINAL (along the length of the vehicle).

BRACKETS REQUIRED FOR FAST ON, FAST OFF!

Bracket Type / Vehicle Rack Style Bracket Model Description

FOR BARS OR PLATFORM STYLES WITH TRANSVERSE SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8304 – HD Adjustable Brackets Short (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical); OR

FOR PLATFORM STYLES WITH LONGITUDINAL SLATS
(WITH NO PERIMETER LIP)

 8320 – HD 15 Degree Angle Brackets* For storing recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).
8306 – HD Adjustable Brackets Long (DOUBLE)*+ For height adjustable storage recovery boards to nominally match the rake of the side of the vehicle (i.e. 15 degrees off-vertical).

*ROOF RACKS WITH PERIMETER LIPS REQUIRE PACKERS TO FIT RACKSBRAX BRACKETS (SOLD SEPARATELY). REFER TO ROOF RACK GUIDE FOR MORE INFORMATION ON RACKS WITH PERIMETER LIPS.

+ These brackets are both height and angle adjustable.

WALL MOUNTS OPTIONAL

BENEFITS

Allows you to remove your roof rack accessory from your vehicle so that it can be fixed to a wall when not in use.

SECURED LOCATION

  • LOCKED GARAGES
  • WORKSHOP WALLS

8160 - HD Wall Mounts*

UNSECURED LOCATION

  • OPEN CARPORTS
  • PUBLIC/SHARED GARAGE AREA

8161 - HD Lockable Wall Mounts*

*NOTE: You cannot use Wall Mounts to mount anything to the vehicle – these are for static wall use ONLY.

Models: TRED Awning and Accessory, TRED, Awning and Accessory, Awning, Accessory

PDF preview unavailable. Download the PDF instead.

RacksBrax Awning Fitment Guide for TRED Rev 4 July 2025 Microsoft Word 2019

Related Documents

Preview RacksBrax MAXTRAX Compatibility Pocket Guide: LITE, MINI, MKII, XTREME
Comprehensive compatibility guide from RacksBrax for MAXTRAX recovery boards, detailing required items and brackets for MAXTRAX LITE, MINI, MKII, and XTREME models. Includes optional wall mount information. Learn about fitting options for various roof rack styles.
Preview RacksBrax Compatibility Pocket Guide for ARB Awnings
A concise guide detailing the compatibility of RacksBrax mounting systems with ARB awnings, including hitch and bracket requirements, and wall mount options for various ARB awning models.
Preview RacksBrax Awning Compatibility Pocket Guide for TJM 4x4
This pocket guide provides essential compatibility information for RacksBrax awnings with TJM 4x4 vehicle fitments, detailing hitch requirements, bracket options, and wall mount solutions for various awning sizes.
Preview RacksBrax Compatibility Pocket Guide for OZtrail Awnings
A compatibility guide from RacksBrax detailing the required hitches, brackets, and wall mounts for various OZtrail Blockout awning models, including 2x2.5m, 3x2.5m, 270 2m, and 270 2.5m.
Preview RacksBrax MAXTRAX Compatibility Pocket Guide: Mounting Accessories
A concise guide to RacksBrax MAXTRAX recovery board mounting accessories, detailing compatibility for MAXTRAX LITE, MINI, MKII, and XTREME models. Includes required items, bracket options, and wall mount solutions.
Preview RacksBrax OCAM Awning & Accessory Compatibility Pocket Guide
A comprehensive guide from RacksBrax detailing compatibility for OCAM 4x4 accessories, including awnings, tents, and mounting hardware like hitches and brackets. Find the right fit for your vehicle setup.
Preview RacksBrax Compatibility Pocket Guide for Joolca
A concise guide detailing the compatibility of RacksBrax awnings and accessories with Joolca products, including specific fitment information for single and double ensuite models.
Preview RacksBrax Canyon Off-Road Awning Compatibility Guide
Find compatibility information for RacksBrax Canyon Off-Road Hardshell Side Awning and Shower Tent Awning. Details on hitches, brackets, and wall mounts for various vehicle fitments.