CLIM8ZONE™

Thank You

Thank you for using Balboa Water Group spa controls.

Please visit us at: www.BalboaWaterGroup.com

Temperature Modes ❄️

CLIM8ZONE™ has four Temperature modes for heating/cooling spa water.

1. Heating Mode (Default)

This mode only heats the spa water. All cooling with the CLIM8ZONE™ unit is disabled.

2. Cooling Mode

This mode only cools the spa water. All heating with the CLIM8ZONE™ unit is disabled.

3. Heating and Cooling Mode (Default)

This mode heats and cools the spa water with the CLIM8ZONE™ unit enabled.

4. Disabled

All heating and cooling functions are disabled.

eHeater Modes ⚡

The BP control system has three eHeater modes.

1. Continuous

The electric heater (eHeater) is continuously enabled.

2. eBOOST (Default)

The electric heater is enabled temporarily when an extra boost is required.

3. Disabled

The eHeater is disabled.

[Image Description: A BP Control System with eHeater.]

Speed Modes ?

CLIM8ZONE™ has three Speed modes.

1. Auto Smart (Default)

For Heating or Cooling. Uses Artificial Intelligence. Variable Heating/Cooling capacity. The CLIM8ZONE computer automatically adjusts the compressor frequency up or down using an algorithm based on ambient air temperature and water temperature. This algorithm balances efficiency and noise with heating/cooling output.

2. Manual High

For Heating or Cooling. Highest Heating Capacity. Fastest Water Heating/Cooling. Low COP (Low Energy Efficiency). High Compressor Frequency (fixed). Maximum CLIM8ZONE unit Compressor Noise.

3. Manual Low

For Heating or Cooling. Lowest Heating/Cooling Capacity. Slowest Water Heating. High COP (High Energy Efficiency). Low Compressor Frequency (fixed). Minimum CLIM8ZONE unit Compressor Noise.

Panel: spaTouch 3

[Image Description: The spaTouch 3 control panel displaying temperature set to 100, current time, and various mode icons. The panel includes buttons for Settings, Heat, Clim8zone, Filter, Time, Reminders, and Locks.]

Setting the Temperature Mode

Follow these steps to set the Temperature mode:

1. Press the Settings button (A) to enter the Settings screen.
2. Press the CLIM8ZONE™ button (B) to enter the CLIM8ZONE™ screen.
3. Press the CLIM8ZONE™ button (C) to enter the CLIM8ZONE™ screen.
4. Select one of the following Temperature modes (E): Heat Only (Default), Cool Only, Heat and Cool, Disabled.
5. Press the Save button (D) to save your setting. Press the Cancel button (F) to cancel your setting.

Your setting is complete. ✔️

Setting the Speed Mode

Follow these steps to set the Speed mode:

1. Press the Settings button (A) to enter the Settings screen.
2. Press the CLIM8ZONE™ button (B) to enter the CLIM8ZONE™ screen.
3. Press the Speed button (C) to enter the Speed screen.
4. Select one of the following Speed modes (E): Manual High, Auto Smart (Default), Manual Low.
5. Press the Save button (D) to save your setting. Press the Cancel button (F) to cancel your setting.

Your setting is complete. ✔️

Setting the eHeater Mode

Follow these steps to set the eHeater mode:

1. Press the Settings button (A) to enter the Settings screen.
2. Press the CLIM8ZONE™ button (B) to enter the CLIM8ZONE™ screen.
3. Press the eHeater button (C) to enter the eHeater screen.
4. Select one of the following eHeater modes (E): Disabled, Continuous, eBOOST (Default).
5. Press the Save button (D) to save the new setting. Press the Cancel button (F) to cancel the setting change.

Your setting is complete. ✔️

Contact Information

Email

info@balboawater.com

Phone

P: +714.384.0384

Customer Service is available: Monday - Friday 7:00 AM to 6:00 PM PT

Corporate Office

Balboa Water Group
3030 Airway Avenue
Costa Mesa, CA 92626

Mexico Operations

Balboa Water Group
Aguila Azteca 6011
Baja Maq. El Aquila
Mexico 22221

European Operations

Balboa Water Group
Hydroair International
ApS Roustvej 50 DK-6800 Varde