Olight Warrior X Pro User Manual

Product Overview

The Olight Warrior X Pro is a powerful and versatile LED flashlight designed for various applications. This manual provides essential information for its operation and maintenance.

Key Components:

• Magnetic Tailcap
• Tail Switch
• Lanyard Hole
• Tactical Grip Ring
• Pocket Clip

Diagram Description: The product overview diagram labels the main parts of the flashlight, including the tailcap, switch, lanyard hole, tactical grip ring, and pocket clip.

In the Box

• Warrior X Pro (with Battery)
• Holster
• TGR (Tactical Grip Ring)
• USB Magnetic Charging Cable (MCC3)
• Lanyard
• Pocket Clip

How to Operate

The flashlight is operated using the tail switch:

• Light Output: Lightly press the tail switch for low output; press hard for high output.
• On/Off: Single click (press and quickly release) the tail switch to turn the flashlight on or off.
• Momentary Mode: Press and hold the tail switch for momentary illumination; release the switch to turn off the light.

Battery Installation

Before initial use, unscrew the tailcap and remove the insulating film from the battery compartment. Screw the tailcap back on tightly. When replacing the battery, ensure the positive (+) polarity side faces the flashlight head (towards the LED).

Diagram Description: Visuals show the process of unscrewing the tailcap, removing an insulating film from the battery compartment, and then securely re-screwing the tailcap. It also illustrates the correct battery orientation, with the positive (+) end pointing towards the LED head.

Charging

Charging Cable: The flashlight uses the MCC3 Magnetic USB Charging Cable.

Charging Procedure:

1. Ensure the product is fully charged before its first use.
2. Connect the magnetic USB end of the MCC3 cable to an external USB power source (a power source of 10W or higher, such as 5V 2A, is recommended for optimal charging efficiency).
3. Attach the other end of the magnetic charging cable to the flashlight's charging port.

Charging Indicators:

• Red Indicator: Indicates that the flashlight is currently charging.
• Green Indicator: Indicates that charging is complete (battery power is over 95%).

Note: Only use the standard MCC3 charging cable. It is not compatible with other MCC versions.

Vibrating Power Indicator

The flashlight features a vibrating power indicator to alert users of low battery levels:

• When battery power is 30% or less: The flashlight vibrates once every 5 minutes.
• When battery power is 10% or less: The flashlight vibrates once per minute.
• When battery power is 5% or less: The flashlight vibrates once every 10 seconds.

Tactical Grip Ring (TGR) Installation Guide

1. Unscrew the tailcap and remove the O-ring.
2. Remove the tactical grip ring and pocket clip.
3. Install the TGR and O-ring as depicted in the accompanying diagram, then tighten the tailcap securely.

Diagram Description: The guide illustrates the steps for removing the tailcap, O-ring, tactical grip ring, and pocket clip, followed by reassembling the tactical grip ring and O-ring.

Specifications

Note: All specifications are based on ANSI/NEMA FL1-2009 standard and tested using the battery included with the flashlight. The maximum output brightness may decrease as the battery voltage decreases.

Warnings and Notices

⚠️ WARNING

• Do not throw the light directly into human eyes, as this may cause temporary blindness or permanent eye damage.
• Do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to flammable objects.
• Do not use non-protected rechargeable batteries.
• Keep out of reach of children.
• Avoid activating high mode repeatedly under high temperatures to prevent the flashlight body from overheating and causing injury to the user's hand.
• The tail switch may not function properly when immersed in seawater or other conductive media. Please keep it clean and dry.
• If the product is left unused or is being carried and transported, loosen the tailcap a half turn to prevent accidental activation of the flashlight.

❗ NOTICE

• Do not short-circuit the switch cap with the ring outside it for a prolonged period. A short circuit in this state will result in a loss of current below 3mA and may lead to complete battery drain if it remains in this state for too long.

Warranty Information

• Within 30 days of purchase: Contact the original seller for repair or replacement.
• Within 5 years of purchase: Contact Olight for repair or replacement.
• Battery Warranty: Olight offers a one-year warranty for all rechargeable batteries.
• MCC Magnetic USB Charging Cable: One-year warranty.
• Other Fittings (lanyard, clip): For fragile or low-value fittings like the lanyard and clip, contact post-sale support within 30 days of purchase if there is a quality defect or damage under normal use conditions. Conditional quality assurance will be provided as appropriate for damage under abnormal use conditions or after 30 days.

Customer Support:

• USA Customer Support: cs@olightstore.com
• Global Customer Support: customer-service@olightworld.com

Visit www.olightworld.com to explore Olight's complete product line of portable illumination tools.

The EU-Declaration of Conformity can be found here: https://olightworld.com/ec-declaration

Manufacturer Information

Dongguan Olight E-Commerce Technology Co., Ltd

4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.

Made in China

Model Number: 3.0040.6010.9003