Netac Portable SSD
User Manual and Product Features
Product Features
The NETAC Portable Solid-State Disk is an easy-to-use, plug-and-play, and multi-function storage device. It connects to a computer's USB port via the provided USB cable, requiring no driver installation. To prevent unpredictable data damage, do not disconnect the device during data transmission. Always safely remove the device from your computer before disconnecting it physically. It is strongly recommended to create multiple backups of any crucial data on other devices.
This product utilizes NAND Flash as its storage medium, meaning it contains no mechanical parts. This design offers high transmission rates, quiet operation, resistance to vibration, and secure data storage.
The USB port on this product is compatible with any lower version USB port. However, to achieve the best user experience, it is recommended to connect this product to a USB port of a matching version.
Hardware Requirements
- Desktop computer, laptop, or MAC computer with a USB port. Please connect this product to a port that matches the provided USB cable.
- Compatibility OS: Windows 7/8/8.1/10, Mac OS 10.6, and Android 5.0 or higher.
Note: As UASP (USB Attached SCSI Protocol) is unavailable in Windows 7 or lower editions, it is recommended to use this product with Windows 8 or a higher edition of the operating system to maximize its performance.
User Guide
- Here, 1GB means 1,000,000,000 bytes. The actual available capacity of this product may not be equal to the rated capacity.
- Subject to USB-IF regulations, USB3.2 is used solely to define the performance and capacity of this product, not any specific USB cable or port type (such as USB-C, USB Type A, or Micro-USB).
- The USB3.2 specification encompasses all previous 3.X specifications and defines three transmission rates: 5 Gbps for USB3.2 Gen 1, 10 Gbps for USB3.2 Gen 2, and 20 Gbps for USB3.2 Gen 2x2. Optimal user experience is achieved when this product is used with a device featuring a compatible USB port.
- According to internal testing, the performance of this product may vary depending on the hard drive's capacity, the host device's specifications, the operating system, and the applications used.
- Data stored on this product are not covered by the warranty. Please make regular backups of your data.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
