Netac Portable SSD User Manual
Product Features
The NETAC Portable Solid-State Drive is an easy-to-use, plug-and-play, and multi-function storage device. It connects to a computer's USB port via the provided USB cable, requiring no drivers. To prevent data loss or damage, do not disconnect the device during data transmission. Safely remove the device from your computer before disconnecting. It is recommended to create backups of any crucial data on other devices.
This product utilizes NAND Flash as its storage medium. It contains no mechanical parts and offers high-transmission rates, quiet operation, resistance to vibration, and secure data storage.
The USB port on this product is compatible with any USB port of a lower version. However, to achieve the best user experience, it is recommended to connect this product to a port that matches its USB version.
Hardware Requirements
Requires a desktop computer, laptop, or MAC computer with a USB port. Connect this product to a port that matches the provided USB cable.
Compatibility OS: Windows 7/8/8.1/10, Mac OS 10.6, and Android 5.0 or higher editions. (Note: UASP is not available in Windows 7 or lower editions. For optimal performance, use this product with Windows 8 or a higher edition OS.)
User Guide
- 1 GB is equivalent to 1,000,000,000 bytes. The actual available capacity of this product may not be equal to the rated capacity.
- Subject to USB-IF regulations, USB 3.2 is used solely to define the performance and capacity of this product, not for any USB cable or port such as USB-C, USB Type A, or Micro-USB.
- The USB 3.2 specification supersedes all previous 3.X specifications and defines three transmission rates: 5 Gbps for USB 3.2 Gen 1, 10 Gbps for USB 3.2 Gen 2, and 20 Gbps for USB 3.2 Gen 2x2. Optimal user experience is achieved when this product is used with a device featuring a compatible USB port.
- Internal testing indicates that product performance may vary depending on the hard drive capacity, host devices, operating system, and applications.
- Data stored on this product is not covered by warranty. Please back up your data regularly.
Instructions of Use (Spanish)
- 1 GB equals 1,000,000,000 bytes; the actual available capacity of the product may not be equivalent to the nominal capacity.
- As per USB-IF regulations, USB 3.2 is defined solely for the product's performance and capacity, not for any USB cable or port (e.g., USB-C, USB Type A, Micro-USB).
- The USB 3.2 specification incorporates all prior 3.X specifications and defines three transfer speeds: USB 3.2 Gen 1 at 5 Gbps, USB 3.2 Gen 2 at 10 Gbps, and USB 3.2 Gen 2x2 at 20 Gbps. Optimal product performance is achieved when used with a compatible USB port.
- Internal tests show that product performance may vary based on hard drive capacity, host device, operating system, and applications.
- Data stored on the product is not covered by warranty; therefore, regularly back up your stored data.
Guide d'utilisation (French)
- In this context, 1 GB is approximately equal to 1,000,000,000 bytes, and the actual available capacity of this product may not correspond to the nominal capacity.
- In compliance with USB-IF standards, USB 3.2 solely defines the product's capacity and performance; it does not refer to USB-C, USB Type A, Micro-USB, or any other type of USB cable or interface.
- The USB 3.2 specification consolidates all previous 3.X specifications and defines three transmission speeds: USB 3.2 Gen 1 at 5 Gbps, USB 3.2 Gen 2 at 10 Gbps, and USB 3.2 Gen 2x2 at 20 Gbps. Optimal user experience is achieved when this product is used with any device that has a USB port compatible with this product.
- According to internal tests, the performance of this product may vary depending on the hard drive capacity, the host device, the operating system, and the application.
- Data stored on this product is not covered by warranty. Please back up your stored data regularly.
Guida dell'utente (Italian)
- 1 GB is approximately 1 billion bytes; the actual usable capacity of the product may not equal the nominal capacity.
- Based on USB-IF regulations, USB 3.2 defines only the product's performance capacity, not USB-C, USB Type A, Micro-USB, or any USB cable or interface.
- The USB 3.2 specification incorporates all previous 3.X specifications and defines three transfer speeds: USB 3.2 Gen 1 at 5 Gbps; USB 3.2 Gen 2 at 10 Gbps; USB 3.2 Gen 2x2 at 20 Gbps. The best user experience can only be achieved if the product is used in a device with a USB interface corresponding to this product.
- According to internal tests, product performance will vary depending on the hard disk capacity, the host device, the operating system, and the application program.
- Data stored in the product is not covered by warranty. Please back up stored data periodically.
Gebruiksaanwijzing (Dutch)
- Here, 1GB stands for 1,000,000,000 bytes, and the actual capacity of this product may not be equal to the nominal capacity.
- Subject to USB-IF rules, USB 3.2 is used only to define the performance and capacity of this product, not any USB cable or port such as USB-C, USB Type A, or Micro-USB.
- The USB 3.2 specifications take precedence over all previous 3.X specifications and define three transmission speeds: 5 Gbps for USB 3.2 Gen 1, 10 Gbps for USB 3.2 Gen 2, and 20 Gbps for USB 3.2 Gen 2x2. You will get the most out of this product when it is used in conjunction with a device that has a USB port compatible with this product.
- According to an internal test, the performance of this product may vary depending on the capacity of the hard drive, the devices in the main unit, the operating system, and the applications.
- Data stored on this product is not covered by the warranty; therefore, regularly back up your data.
Benutzerhandbuch (German)
- Here, 1 GB means 1,000,000,000 bytes, and the actual available capacity of this product may not match the nominal capacity.
- In accordance with USB-IF regulations, USB 3.2 is used only to define the performance and capacity of this product, not for USB cables or ports such as USB-C, USB Type A, or Micro-USB.
- The USB 3.2 specification incorporates all previous 3.X specifications and defines three transmission rates: 5 Gbps for USB 3.2 Gen 1, 10 Gbps for USB 3.2 Gen 2, and 20 Gbps for USB 3.2 Gen 2x2. Optimal user experience can only be achieved when this product is used in a device with a USB port that matches this product.
- Internal tests indicate that the performance of this product may vary depending on the hard drive capacity, the devices in the main unit, the operating system, and the applications.
- Data stored in this product is not covered by the warranty. Please back up your data regularly.