Remote Control User Guide

Before operation: setting the current time

Follow these steps to set the current time on your remote control:

1. Press the CLOCK button.
2. Press the TIME button to set the hour. The display will show the current hour.
3. Press the DAY button to set the day of the week.
4. Press the CLOCK button again to confirm and exit.

Example displays: Mon 0:00, Mon 13:00

3D i-see Sensor®

The 3D i-see Sensor detects room temperature and occupant location to optimize comfort and energy efficiency.

Sensor Function

The sensor detects the room temperature.

Absence Detection

When no one is detected in the room, the unit automatically switches to Energy-saving mode. This occurs 10 minutes after leaving the room, and the unit will switch to a more significant energy-saving state 60 minutes after leaving.

Indirect/Direct Airflow Control

Press the INDIRECT/DIRECT button to activate INDIRECT/DIRECT mode. This feature is available when the i-see control mode is active.

Indirect Mode: Airflow is directed away from room occupants, providing a gentle breeze.

Direct Mode: Airflow is aimed towards individuals in the space, ensuring they feel the cooling or heating effect directly.

Off: Disables Indirect/Direct mode.

Occupant Location Detection

The 3D i-see Sensor detects the location of occupants within the room. Direct mode aims airflow towards individuals, while Indirect mode diverts air away from them.

Note: For multi-systems with multiple indoor units, different operation modes cannot be set for each unit. Certain functions may also be unavailable in such configurations.

Operation and Control

Selecting Operation Modes

Press the ON/OFF button to start or stop operation.

Press the MODE button to select the desired operation mode. Each press cycles through the modes in the following order:

• AUTO
• COOL
• DRY
• HEAT
• FAN

Temperature Setting

Press the TEMP button to set the desired temperature. Each press raises or lowers the temperature by 1°F.

Convenient One-Touch Functions

These buttons toggle specific functions on or off:

ECONO COOL Mode

ECONO COOL uses a specific airflow pattern to create an enhanced cooling sensation. This allows the temperature to be set 2°F higher without compromising comfort.

Powerful Mode

POWERFUL mode operates the air conditioner at maximum capacity for 15 minutes for rapid cooling or heating.

Smart Set

Assign your preferred temperature setting to the SMART SET button. Recall this setting with a single press. Pressing it again returns to the previous temperature setting.

In normal heating mode, the lowest settable temperature is 61°F. Using Smart Set, this can be lowered to 50°F.

Natural Flow

This function simulates natural wind for enhanced comfort. As time passes, the airflow becomes gentler and more like a continuous breeze.

Press the NATURAL FLOW button to toggle this function on or off.

3D i-see Sensor® Operation

¹Gently press the SENSOR button using a thin instrument [e.g., a pen tip] during COOL, DRY, HEAT, and AUTO modes to activate the i-see control mode. The [SENSOR] symbol will appear on the operation display. The default setting is "active".

²Press the SENSOR button again to activate Absence Detection. The [SENSOR] symbol will appear on the operation display.

³Press the SENSOR button a third time to release i-see control mode.

⁴Refer to the back panel for more information on 3D i-see Sensor operation.

Fan Speed & Airflow Direction Adjustment

Fan Speed

Press the FAN button to select the fan speed. Each press cycles through the speeds:

• AUTO
• Silent
• Low
• Med.
• High
• Super High

Wide Vane Airflow Direction

Press the WIDE VANE button to select the horizontal airflow direction. Each press cycles through the directions:

• SWING
• Specific directional settings (represented by directional arrows or labels like L-VANE-R).

Left and Right Vane Airflow Direction

Press the L-VANE-R button to select the vertical airflow direction. Each press cycles through the directions:

• AUTO
• 1
• 2
• 3
• 4
• 5
• SWING

Timer Operation

On and Off Timer

Press the ON or OFF button during operation to set a timer. The timer setting will blink.

ON Timer: The unit turns ON at the set time.

OFF Timer: The unit turns OFF at the set time.

Use the ▲ (Increase) and ▼ (Decrease) buttons to set the desired time. Each press adjusts the time by 10 minutes.

Press the ON or OFF button again to cancel the timer.

Note: If ON or OFF blinks, ensure the current time and day are set correctly.

Weekly Timer

1. Press the SET button to enter the weekly timer setting mode.

2. Use the DAY and 1-4 buttons to select the day and timer number (1-4).

3. Use the ON/OFF, TIME, TEMP buttons and ▲/▼ to set the ON/OFF status, time, and desired temperature for the selected timer slot.

4. Press SET to confirm and transmit the weekly timer settings.

5. Press the ON/OFF button to turn the weekly timer ON. The WEEKLY TIMER indicator will light up.

6. Press the ON/OFF button again to turn the weekly timer OFF. The WEEKLY TIMER indicator will go out.

When the weekly timer is ON, the indicator for the day of the week with a completed timer setting will light up.

Example of Timer Operation:

Timer OFF: Unit turns OFF at 11:30.

Timer ON: Unit turns ON at 7:30 with a temperature setting of 68°F. It then changes to 72°F at 8:30.